Based on Linux kernel:
commit f922bd798bb9 ("mtd: rawnand: add an option to specify NAND chip as a boot device")
Allow to define a NAND chip as a boot device. This can be helpful
for the selection of the ECC algorithm and strength in case the boot
ROM supports only a subset of controller provided options.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-2-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
There not only ARM64 boards but also RISC-V boards that require a bounce
buffer to read block devices.
Drop the architecture restriction.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
uint64_t is defined as unsigned long long on 32-bit ARM.
Use PRIX64 for printing uint64_t.
This avoid a build failure on 32-bit systems:
tools/mkeficapsule.c: In function 'dump_capsule_auth_header':
tools/mkeficapsule.c:694:66: warning: format '%lX' expects argument of
type 'long unsigned int', but argument 2 has type 'uint64_t'
{aka 'long long unsigned int'} [-Wformat=]
694 | printf("EFI_FIRMWARE_IMAGE_AUTH.MONOTONIC_COUNT\t\t: %08lX\n",
| ~~~~^
| |
| long unsigned int
| %08llX
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
efi_get_var() allocates memory which must be freed after the variable is
used. Since the device path is duplicated after we deserialize the load
options free the memory used for the variable payload
Fixes: db61e70e0d2a efi_loader: efi_dp_from_lo() should skip VenMedia node
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinric Schuchardt <heinrich.schuchardt@canonical.com>
u-boot-dfu-20240822
- Fix crash in BCB on invalid block device (reported by coverity)
- Fix booting Android kernel without a ramdisk using fastboot
- Fix ux500 gadget driver ops based on CONFIG_USB_MUSB_HOST
In case CONFIG_USB_MUSB_HOST is set, the ux500_gadget_ops get overridden
to musb_usb_ops . Simply set the ops one way or the other depending on
whether CONFIG_USB_MUSB_HOST is set or not.
Fixes: ac4bf5d48a9e ("usb: gadget: ux500: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240818200425.89045-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
android_image_get_ramdisk() will return an error if there is no ramdisk.
Using the android image without a ramdisk worked until commit
1ce8e10f3b4b ("image: Fix up ANDROID_BOOT_IMAGE ramdisk code") because
the return code wasn't checked until then. Return -ENOENT in case
there is no ramdisk and translate that into -ENOPKG in the calling
code, which will then indicate "no ramdisk" to its caller
(boot_get_ramdisk()).
This way, we can get rid of the "*rd_data = *rd_len = 0;" in the error
path, too.
With this, I'm able to boot a linux kernel using fastboot again:
fastboot --base 0x41000000 --header-version 2 --dtb /path/to/dtb \
--cmdline "root=/dev/mmcblk0p1 rootwait" boot path/to/Image
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20240729213657.2550935-1-mwalle@kernel.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
When blk_get_dev() fails, block NULL and gets de-referenced in
the error path by a printf(), resulting in a crash.
This can be reproduced on sandbox with:
$ ./u-boot --command "bcb load mmc 0 0"
Fix the message by using the functions arguments (iface, devnum)
instead.
Note: partition (being a global static initialized) can be used safely.
This issue has been reported by coverity [1]
[1] https://lore.kernel.org/all/20240723141844.GF989285@bill-the-cat/
Fixes: dfeb4f0d7935 ("cmd: bcb: extend BCB C API to allow read/write the fields")
Reviewed-by: Dmitrii Merkurev <dimorinny@google.com>
Link: https://lore.kernel.org/r/20240724-bcb-crash-v1-1-44caff15bce4@baylibre.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Using "MAINTAINER" and "Description" have been replaced with
org.opencontainers.image namespace variables.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to build the docker container, which contains a download cache
of python modules, we need to have our versions be in sync in each
requirements file. Update some of the cases where which are older than
the rest of the project.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Add a new defconfig file for the AM335x High Security EVM. This config
is specific for the case of SPI booting.
Signed-off-by: Andrew Davis <afd@ti.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22014
- Convert tqma6q_mba6 to watchdog DM to fix reset.
- Convert tqma6q_mba6 to PMIC and I2C DM.
- Convert tqma6q_mba6 to OF_UPSTREAM.
- Do not print the board name twice on tqma6.
- Enable CMD_ERASEENV for imx8mm/mp Phytec boards.
- Add imx8ulp binman support.
- Fix imx8 build when CONFIG_IMX_BOOTAUX is set.
Currently, the devicetree model as well as the board variant name
are shown:
...
Model: TQ TQMa6S/DL on MBa6x
Board: TQMa6DL on a MBa6x
...
Unselect the CONFIG_DISPLAY_BOARDINFO option so that the
board name is printed only once in board_late_init() instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Currently, the power_init_board() function is not executed because
CONFIG_POWER_LEGACY is not selected.
Convert to PMIC driver model, which allows removing board I2C code in
favor of the I2C driver model.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Instead of using the local imx6-tqma6 devicetree copies from U-Boot,
convert the imx6-tqma6 target to OF_UPSTREAM so that the upstream
kernel devicetrees can be used instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fabio Estevam <festevam@denx.de>
- Re-use i.MX 93 Makefile target as similar boot process
- Create imx8ulp-u-boot.dtsi for binman image architecture
- Create both SPL and U-Boot containers configuration
Key differences between the 93 and 8ULP SPL container are:
- No LPDDR training library needed for 8ULP
- 8ULP requires a uPower binary (RISC-V core) for power management
- 8ULP also requires a M33 binary to work properly
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
This is extending commit da96f93cda9 ("spl: binman: Disable u_boot_any
symbols for i.MX93 boards") to i.MX 8ULP boards.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Part of the upower management was included in a previous commit [1].
This patch only adds the bits required to properly parse a config file
that would include the binary as follows:
IMAGE PWR upower.bin
[1] 6ec65c8558f (tools: image: support i.MX93)
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Currently the ULP token sets the soc as IMX9, making it impossible to
differentiate the two families of processors.
However, since the 8ULP requires specific binaries like upower which do
not exist in 93, they need to be separated.
Fixes: 6ec65c8558f (tools: image: support i.MX93)
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Please pull the updates for rockchip platform:
- Add board support:
RK3566: Radxa ROCK 3 Model C
Radxa ZERO 3W/3E
Xunlong Orange Pi 3B
RK3568J: Radxa ROCK 3B
RK3308B: Radxa ROCK S0
RK3588: Radxa ROCK 5 ITX
FriendlyElec CM3588 NAS board
- dw-mmc: allow 4-bit mode;
- dts and config updates;
CI:
https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/21997
ubi fixes for v2024.10-rc3
- ubi memleak fixes from Alexander
- ubifs: mount fails after power cycle
fixed from Ravi
commit ported from kernel commit 304790c038bc4af4f19774705409db27eafb09fc
HS: fixed checkpatch Error
ERROR: Remove Gerrit Change-Id's before submitting upstream
#213:
Change-Id: I487ae4d172e228e72ac31d158d668f209142bce0
removed this line from commit message.
- memleak fixes from Michael in ubifs, missing ubifs_iput(inode) after
ubifs_iget() calls.
Special thanks to all of them for detecting/fixing and testing
this patches!
UEFI:
* efi_loader: use list_count_nodes() in efi_protocols_per_handle()
* efi_loader: correct description of efi_get_distro_fdt_name
* boot: set correct block device name in set_efi_bootdev()
* configs: enable efidebug and EFI http boot on QEMU aarch64
Other:
* Makefile: don't use CFLAGS for environment text file
-----BEGIN PGP SIGNATURE-----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=XKMc
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-10-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-10-rc3
UEFI:
* efi_loader: use list_count_nodes() in efi_protocols_per_handle()
* efi_loader: correct description of efi_get_distro_fdt_name
* boot: set correct block device name in set_efi_bootdev()
* configs: enable efidebug and EFI http boot on QEMU aarch64
Other:
* Makefile: don't use CFLAGS for environment text file
USB Type-C port is configured as "peripheral" port. so enable "ums"
command to use as USB Mass Storage device.
("rockusb" command is already enabled and working)
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
"usb_host1_xhci" and related node were already upstreamed. remove
unnecessary properties from u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
With the commit 6afdb1585112 ("dm: core: migrate debug() messages to use
dm_warn") use of DM_WARN/SPL_DM_WARN print a lot of debug messages.
Disable the SPL_DM_WARN Kconfig option to remove verbose logging and
restore normal serial console output during boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Rock 5 ITX is a board in ITX form factor using the RK3588 SoC
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.
Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
The naming scheme with the dashes follows Dragan's comment on the mainline
devicetree commit:
"the name of this board deviates from the standard Radxa naming scheme,
which is something like "ROCK <number><letter>" thus, "rock-5a" is
fine, but it should be "rock-5-itx", simply because there's a space
between "5" and "ITX" in "ROCK 5 ITX"
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
The revision is different for these, add the additional check as in
xhci-dwc3 core_init code.
Equivalent upstream Linux patch:
690fb3718a70 ("usb: dwc3: Support Synopsys USB 3.1 IP")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
We use KCPPFLAGS to let the user set flags when invoking the C precompiler.
These should also be used when generating the environment text file.
Reported-by: Dave Jones <dave.jones@canonical.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
EFI HTTP is a useful option to have by default and is working reliably on
QEMU. Let's enable it by default, since we have no size limitations.
While at it enable 'efidebug' as well, which is currently needed to
configure the EFI HTTP boot options.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
For SATA devices the class name is 'ahci' but the block device name is
'sata'.
Use function blk_get_uclass_name() to retrieve the correct string.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use the correct function name.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
When kernel uses file system encryption, fscrypt on UBIFS v5,
after a hard power cycle UBIFS journal replay fails which results in mount failure.
Failure logs:
UBIFS: recovery needed
UBIFS error (pid 0): ubifs_validate_entry: bad directory entry node
UBIFS error (pid 0): replay_bud: bad node is at LEB 890:24576
UBIFS error (pid 0): ubifs_mount: Error reading superblock on volume 'ubi0:rootfs' errno=-22!
This change is ported from kernel:
commit id: 304790c038bc4af4f19774705409db27eafb09fc
Kernel commit description:
Kernel commit description:
ubifs: Relax checks in ubifs_validate_entry()
With encrypted filenames we store raw binary data, doing
string tests is no longer possible.
Signed-off-by: rminnikanti <rminnikanti@marvell.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Safety guard in the U-Boot filesystem glue code, because these functions
are called from different parts of the codebase. For generic filesystem
handling this should have been checked in blk_get_device_part_str()
already. Commands from cmd/ubifs.c should also check this before
calling those functions, but you never know?!
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Although kfree() is in fact only a slim wrapper to free() in U-Boot, use
kfree() here, because those structs where allocated with kalloc() or
kzalloc().
Signed-off-by: Alexander Dahl <ada@thorsis.com>
