The bootstage array includes pointers to strings but not the strings
themselves. The strings are added when stashing, but including them in
the size calculation gives an inflated view of the amount of space used
by the array.
Update this function so it can return the amount of memory used by the
bootstage structures themselves, without the strings which they point
to.
Signed-off-by: Simon Glass <sjg@chromium.org>
The call to malloc() is a bit strange. The naming of the arguments
suggests that an address is passed, but in fact it is a pointer, at
least in the board_init_r() function and SPL equivalent.
Update it to work as described. Add a function comment as well.
Note that this does adjustment does not extend into the malloc()
implementation itself, apart from changing mem_malloc_init(), since
there are lots of casts and pointers and integers are used
interchangeably.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/22962
Dfu:
- Rely on device tree for spi speed/mode on spi flash
Android Image:
- Fix booting on platforms having > 4GiB of memory
- Decompress boot image to kernel_addr_r when compression is enabled
- Honor CONFIG_SYS_LOAD_ADDR when mkbootimg uses default address
Bcb:
- Rework bcb command to use U_BOOT_LONGHELP
- Move ab_select cmd to bcb cmd
- Implement ab_dump command in bcb
- bcb: Write '_<slot>' instead of '<slot>' to misc partition
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip
RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C.
Features tested on a ODROID-M2 16GB rev1.0 20240611:
- SD-card boot
- eMMC boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The function prototypes that are defined in the header most likely has
to be marked as static inline. This helps avoiding the compiler warnings:
include/mux.h:120:14: warning: no previous prototype for ‘mux_control_states’ [-Wmissing-prototypes]
include/mux.h:125:18: warning: no previous prototype for ‘mux_control_select’ [-Wmissing-prototypes]
include/mux.h:133:5: warning: no previous prototype for ‘mux_control_deselect’ [-Wmissing-prototypes]
include/mux.h:138:21: warning: no previous prototype for ‘mux_control_get’ [-Wmissing-prototypes]
include/mux.h:143:6: warning: no previous prototype for ‘mux_control_put’ [-Wmissing-prototypes]
include/mux.h:147:21: warning: no previous prototype for ‘devm_mux_control_get’ [-Wmissing-prototypes]
include/mux.h:153:5: warning: no previous prototype for ‘dm_mux_init’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are no users of the blk_create_device() function outside the uclass.
Let's make it static. This will ensure that new block drivers will use
blk_create_devicef().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When booting with platforms having > 4GiB of memory,
the kernel physical address can be more than 32bits.
Use ulong like all the other addresses, and fix the
print to show the > 32bits address numbers.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Link: https://lore.kernel.org/r/20241017-topic-fastboot-fixes-mkbootimg-v2-1-c3927102d931@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
It's really helpful to have the ability to dump BCB block for debugging
A/B logic on the board supported this partition schema.
Command 'bcb ab_dump' prints all fields of bootloader_control struct
including slot_metadata for all presented slots.
Output example:
=====
> board# bcb ab_dump ubi 0#misc
> Read 512 bytes from volume misc to 000000000bf07580
> Read 512 bytes from volume misc to 000000000bf42f40
> Bootloader Control: [misc]
> Active Slot: _a
> Magic Number: 0x42414342
> Version: 1
> Number of Slots: 2
> Recovery Tries Remaining: 0
> CRC: 0x2c8b50bc (Valid)
>
> Slot[0] Metadata:
> - Priority: 15
> - Tries Remaining: 0
> - Successful Boot: 1
> - Verity Corrupted: 0
>
> Slot[1] Metadata:
> - Priority: 14
> - Tries Remaining: 7
> - Successful Boot: 0
> - Verity Corrupted: 0
====
The ab_dump command allows you to display ABC data directly on the
U-Boot console. During an A/B test execution, this test verifies the
accuracy of each field within the ABC data.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3_android
Link: https://lore.kernel.org/r/20241017-android_ab_master-v5-5-43bfcc096d95@salutedevices.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To enhance code organization, it is beneficial to consolidate all A/B
BCB management routines into a single super-command.
The 'bcb' command is an excellent candidate for this purpose.
This patch integrates the separate 'ab_select' command into the 'bcb'
group as the 'ab_select' subcommand, maintaining the same parameter list
for consistency.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3_android
Link: https://lore.kernel.org/r/20241017-android_ab_master-v5-3-43bfcc096d95@salutedevices.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
There are new function documentation requirements in U-Boot, so apply
these changes for android_ab.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3_android
Link: https://lore.kernel.org/r/20241017-android_ab_master-v5-1-43bfcc096d95@salutedevices.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To smoothly handle the transition from the legacy SPI FLASH
API to the driver model API, add the DM functions
as dummy inline functions.
Today, client code uses #if/#else conditionals, but it's better
to use if(IS_ENABLED()) to make sure all code builds fine
and avoid configuration hell, leaving the compiler remove
the dead code.
An example is cmd/sf, which could make use of those dummy
functions to drop the conditional compilation.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241001-uboot-topic-dfu-sf-dt-v2-1-67f7acfa3ff5@linaro.org
[mkorpershoek: removed duplicate "the" from commit msg]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Nothing in cyclic.h is needed to define struct global_data, so do not
include that header.
If any .c file relies on getting cyclic.h through asm/global_data.h,
it needs to include it itself.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Nobody relies on getting the cyclic API declared by including the
watchdog.h header, but for historical reasons, many TUs include
watchdog.h to get a declaration of schedule(). Now that we have a
dedicated header for just that, include that header instead of
cyclic.h.
Eventually, all TUs that call schedule() should themselves include
u-boot/schedule.h, but this is a step towards getting rid of
unnecessary include statements in cyclic.h and global_data.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
The only caller left is schedule(); everybody outside cyclic.c now
calls or references schedule().
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
I noticed an "unnecessary" include of <cyclic.h> in
global_data.h, in the sense that nothing in cyclic.h is needed in
order to define 'struct global_data'.
Well, it's not unnecessary, as it implicitly ensures that everybody
gets a declaration of schedule(), and schedule() is (obviously) called
all over the tree. Almost none of those places directly include
<cyclic.h>, but for historical reasons, many do include
<watchdog.h> (most schedule() instances are replacements of
WATCHDOG_RESET()).
However, very few TUs actually need the declarations of the
cyclic_register() and struct cyclic_info, and they also don't really
need anything from the watchdog.h header.
So introduce a new header which just contains a declaration of
schedule(), which can then be included from all the places that do
call schedule(). I removed the direct reference to cyclic_run(),
because we shouldn't have two public functions for doing roughly the
same without being very explicit about when one should call one or the
other.
Testing of later patches that explicitly include <schedule.h> when
schedule() is used revealed a problem with host tool build on win32,
which apparently picked up a host <schedule.h>. To avoid that problem,
put the new header in include/u-boot/ and hence make the include
statements say <u-boot/schedule.h>.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
The VNBYTES() macro has been updated to silence possible warnings
regarding authorized (but unusual) uses of this macro, but the comment
was kept unchanged. A year has passed so let's fix the comment now to
avoid confusions.
Fixes: cc05d352fbc ("video: Add parentheses around VNBYTES() macro")
Suggested-by: Tom Rini <trini@konsulko.com>
Link: https://lore.kernel.org/u-boot/20240906183432.GG3879073@bill-the-cat/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Chia-Wei Wang <chiawei_wang@aspeedtech.com> says:
Aspeed AST2700 SoCs integrates the Caliptra secure IP, where an ECDSA384
signature verification HW interface is exported for SoC crypto needs.
This patch series firstly extends the FIT image signing/verify common
code to support the ECDSA384 algorithm. For better convenience, the
device tree for ECDSA public key storage is also revised by referring
to RSA implementations.
After the FIT common code revision, the driver is implemented for
AST2700 to leverage the Caliptra ECDSA384 signature verification.
These are verified by signed FIT images with the algorithm "sha384,ecdsa384".
Link: https://lore.kernel.org/r/20241014095620.216936-1-chiawei_wang@aspeedtech.com
Add ECDSA384 algorithm support for image signing and verification.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
expo improvements
binman support for signing FIT images
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmcSwRQRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIreYWLgf/dnh+7hFENA/pIp57kiihzLc4sH+XaCiR
A6MDkSnYWFCJpklz2rPPGsyuxEVtNgVtHEpPwA8OPaXitfuyLW/u5woBN6Sdtcvw
Fqvq72IIMIt3BR6pU2uYZ6w/4t0r0/2pdSYG7L77QJjGsFSe35/RbVaGeln//SEk
7/5tnqQ13QbhfazwLWNGT7+8R65NcpSwywxGqMcKWMPLt0CW+DMmon4oBuya20pv
i5uDIp7WWtyxFaCxB3vzKmaXVmX74x9wyWA/K6uWsWt0/9JnEpQh5+IcgKw5ifGF
sz2kVyZgCXilw1itrmO67O98KPfbRSFIQO2gSZ5NnNB4wrIgFXK2KA==
=1pdb
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-17oct24-take2' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm
A few new x86 commands and minor improvements
expo improvements
binman support for signing FIT images
Move the SR3 bit definition in the right place. Fix
what is likely a rebase artifact. No functional change.
Fixes: 215f1d5794c6 ("mtd: spi-nor: Clear Winbond SR3 WPS bit on boot")
Signed-off-by: Marek Vasut <marex@denx.de>
At present menu items are stored according to their sequence number in
the menu. In some cases we may want to have holes in that sequence, or
not use a sequence at all.
Add a new 'value' property for menu items. This will be used for
reading and writing, if present. If there is no 'value' property, then
the normal sequence number will be used instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Set aside some expo IDs for 'save' and 'discard' buttons. This avoids
needing to store the IDs for these. Adjust the documentation and expo
tool for the new EXPOID_BASE_ID value.
Ignore these objects when saving and loading the cedit, since they do
not contain real data.
Adjust 'cedit run' to return failure when the user exits the expo
without saving. Update the test for this change as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present a fixed position is used for menu items, 200 pixels to the
right of the left side of the labels. This means that a menu item with
a very long label may overlap the items.
It seems better to calculate the maximum label width and then place the
items to the right of all of them.
To implement this, add a new struct to containing arrangement
information. Calculate it before doing the actual arrangement. Add a
new style item which sets the amount of space from the right side of
the labels to left side of the items.
Signed-off-by: Simon Glass <sjg@chromium.org>
When starting a new text line, an assumption is made that the current
vertical position is a multiple of the character height. When this is
not true, characters can be written after the end of the framebuffer.
This can causes crashes and strange errors from QEMU.
Adjust the scrolling check when processing a newline character, to
avoid any problems.
Add some comments to make things a little clearer.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is useful for highlighting something with a black background, as
is needed with cedit when using a white-on-black console. Add this as
a new colour.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some boards still don't enable BLK but we want to be able to at least
compile the code which relies on this. For example, bootstd includes
calls to blk_...() functions, albeit with a check for BLK so that the
code is eliminated by the compiler.
Reduce the scope of the BLK #ifdef to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22796
- Switch to using upstream DT on DH i.MX8MP DHCOM PDK2/PDK3.
- Add ability to build fallback DTBOs from arch/$(ARCH)/dts.
- Remove fdt_high and initrd_high env variables from imx6-dhcom.
- Add dummy clk for imx8.
- Fix DT corruption in imx8_cpu.
- Improve DDR stability on pico-imx7d.
Remove both "fdt_high" and "initrd_high" environment variables
in favor of "bootm_size" to safely contain a kernel, device tree
and initrd for relocation inside of 256 MiB region of DRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Move do_irqinfo() prototype to a header file, otherwise compiler is not
happy:
arch/x86/lib/interrupts.c:130:5: warning: no previous prototype for ‘do_irqinfo’ [-Wmissing-prototypes]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Add 'struct cmd_tbl;' to irq_func.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
- stm32mp: Add script to install U-Boot from SD/eMMC to SPI NOR on DH STM32MP15xx
- stm32mp: Switch to using upstream DT on DH STM32 DHSOM
- stm32mp: Generate u-boot.itb using binman on DH STM32 DHSOM
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmcQ1JUACgkQ4rK92eCq
k3W+xQf+K0oBb8yTpVKSXW8quotu6r8XwrzvcWOpZVIIGpPpFoRa61feNcI5+Zrl
lvD3rBrD31PvvHC1wWPRsN3c+oJlnq7GQDPChix54rclgGJNd04zCnJ9QaST309F
yqr7w6Cx/AL6Fbcvxbv8FvQxyjgGrbchbJ4sHeD9AYABhV3Z0DuBaUttZorG6ZIO
23pxvK9X/dUJGmbmvKkMID3Ifxzum3HEaPf7n3HkFg1/bzICXSSjRUEAFBLWlQp5
7oiWLvHZDIefpC8zupewXYvRscsG9HOjSWhRUc8+zu4rK1bele/v4nig46nfrRSN
3RpimkKVvnJ2svV1cCLS2Mhq2V6SlQ==
=XS+7
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20241017' of https://source.denx.de/u-boot/custodians/u-boot-stm
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/22732
- stm32mp: fix boot issue with OP-TEE
- stm32mp: Add script to install U-Boot from SD/eMMC to SPI NOR on DH STM32MP15xx
- stm32mp: Switch to using upstream DT on DH STM32 DHSOM
- stm32mp: Generate u-boot.itb using binman on DH STM32 DHSOM
This adds TCPM framework in preparation for fusb302 support, which can
handle USB power delivery messages. This is needed to solve issues with
devices, that are running from a USB-C port supporting USB-PD, but not
having a battery.
Such a device currently boots to the kernel without interacting with
the power-supply at all. If there are no USB-PD message replies within
5 seconds, the power-supply assumes the peripheral is not capable of
USB-PD. It usually takes more than 5 seconds for the system to reach
the kernel and probe the I2C based fusb302 chip driver. Thus the
system always runs into this state. The power-supply's solution to
fix this error state is a hard reset, which involves removing the
power from VBUS. Boards without a battery (or huge capacitors) will
reset at this point resulting in a boot loop.
This imports the TCPM framework from the kernel. The porting has
originally been done by Rockchip using hardware timers and the Linux
kernel's TCPM code from some years ago.
I had a look at upgrading to the latest TCPM kernel code, but that
beast became a lot more complex due to adding more USB-C features.
I believe these features are not needed in U-Boot and with multiple
kthreads and hrtimers being involved it is non-trivial to port them.
Instead I worked on stripping down features from the Rockchip port
to an even more basic level. Also the TCPM code has been reworked
to avoid complete use of any timers (Rockchip used SoC specific
hardware timers + IRQ to implement delayed work mechanism). Instead
the delayed state changes are handled directly from the poll loop.
Note, that (in contrast to the original Rockchip port) the state
machine has the same hard reset quirk, that the kernel has - i.e.
it avoids disabling the CC pin resistors for devices that are not
self-powered. Without that quirk, the Radxa Rock 5B will not just
end up doing a machine reset when a hard reset is triggered, but will
not even recover, because the CPU will loose power and the FUSB302
will keep this state because of leak voltage arriving through the RX
serial pin (assuming a serial adapter is connected).
This also includes a 'tcpm' command, which can be used to get
information about the current state and the negotiated voltage
and current.
Co-developed-by: Wang Jie <dave.wang@rock-chips.com>
Signed-off-by: Wang Jie <dave.wang@rock-chips.com>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The initialization of upriv->buf doesn't check for a NULL return. But
there's actually no point in doing a separate, unconditional malloc()
in post_probe; we can just make serial_dev_priv contain the rx buffer
itself, and let the (larger) allocation be handled by the driver core
when it allocates the ->per_device_auto. The total run-time memory
used is mostly the same, we reduce the code size a little, and as a
bonus, struct serial_dev_priv does not contain the unused members when
!SERIAL_RX_BUFFER.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
The current implementation of the circular rx buffer falls into a
common trap with circular buffers: It keeps the head/tail indices
reduced modulo the buffer size. The problem with that is that it makes
it impossible to distinguish "buffer full" from "buffer empty",
because in both situations one has head==tail.
This can easily be demonstrated: Build sandbox with RX_BUFFER enabled,
set the RX_BUFFER_SIZE to 32, and try pasting the string
01234567890123456789012345678901
Nothing seems to happen, but in reality, all characters have been read
and put into the buffer, but then tstc ends up believing nothing is in
the buffer anyway because upriv->rd_ptr == upriv->wr_ptr.
A better approach is to let the indices be free-running, and only
reduce them modulo the buffer size when accessing the array. Then
"empty" is head-tail==0 and "full" is head-tail==size. This does rely
on the buffer size being a power-of-two and the free-running
indices simply wrapping around to 0 when incremented beyond the
maximal positive value.
Incidentally, that change from signed to unsigned int also improves
code generation quite a bit: In C, (signed int)%(signed int) is
defined to have the sign of the dividend (so (-35) % 32 is -3, not
29), and hence despite the modulus being a power-of-two, x % 32 does
not actually compile to the same as a simple x & 31 - on x86 with -Os,
it seems that gcc ends up emitting an idiv instruction, which is quite
expensive.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
This is cosmetic change.
Remove the empty comment blocks remaining after conversion to Kconfig
of CONFIG_SYS_MAX_NAND_DEVICE and CONFIG_SERVERIP.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Make the dh_update_sd_to_sf script generic, rename it to dh_update_block_to_sf
and implement two specific dh_update_sd_to_sf and dh_update_emmc_to_sf scripts
which load U-Boot from either SD or eMMC and install it into SPI NOR.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add support for the wget command with NET_LWIP. The command normally
expects a URL: wget [loadaddr] url, but it also accepts the legacy
syntax: wget [loadaddr] [server:]file.
The server IP may alternatively be supplied via ${httpserverip} which
has higher priority than ${serverip}.
Based on code initially developed by Maxim U.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Co-developed-by: Maxim Uvarov <muvarov@gmail.com>
Cc: Maxim Uvarov <muvarov@gmail.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add CMD_DNS when NET_LWIP is enabled to provide the dns command using
lwIP.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add support for the the ping command with NET_LWIP. The implementation
is derived from lwIP's contrib/apps/ping/ping.c.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Implement do_tftpb(). This implementation of the tftp command
supports an optional port number. For example:
tftp 192.168.0.30:9069:file.bin
It also supports taking the server IP from ${tftpserverip} if
defined, before falling back to ${serverip}.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as
well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due
to this code having an implicit dependency on do_tftpb().
Note that PXE is likely non-fonctional with NET_LWIP (or at least not
100% functional) because DHCP option 209 is not supported by the lwIP
library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
