fastboot: Only call the bootm command if it is enabled

This fixes an error with trying to link against do_bootm() when
CONFIG_CMD_BOOTM is disabled.

Series-to: u-boot@lists.denx.de

Signed-off-by: Samuel Holland <samuel@sholland.org>

.azure-pipelines.yml

@@ -2,7 +2,7 @@ variables:
   windows_vm: windows-2019
   ubuntu_vm: ubuntu-22.04
   macos_vm: macOS-12
-  ci_runner_image: trini/u-boot-gitlab-ci-runner:jammy-20221003-17Oct2022
+  ci_runner_image: trini/u-boot-gitlab-ci-runner:jammy-20230126-10Feb2023
   # Add '-u 0' options for Azure pipelines, otherwise we get "permission
   # denied" error when it tries to "useradd -m -u 1001 vsts_azpcontainer",
   # since our $(ci_runner_image) user is not root.
@@ -30,7 +30,7 @@ stages:
           %CD:~0,2%\msys64\usr\bin\bash -lc "pacman --noconfirm --needed -Sy make gcc bison flex diffutils openssl-devel libgnutls-devel libutil-linux-devel"
         displayName: 'Install Toolchain'
       - script: |
-          echo make tools-only_defconfig tools-only NO_SDL=1 > build-tools.sh
+          echo make tools-only_defconfig tools-only > build-tools.sh
           %CD:~0,2%\msys64\usr\bin\bash -lc "bash build-tools.sh"
         displayName: 'Build Host Tools'
         env:
@@ -47,43 +47,25 @@ stages:
       - script: brew install make ossp-uuid
         displayName: Brew install dependencies
       - script: |
-          gmake tools-only_config tools-only NO_SDL=1 \
+          gmake tools-only_config tools-only \
             HOSTCFLAGS="-I/usr/local/opt/openssl@1.1/include" \
             HOSTLDFLAGS="-L/usr/local/opt/openssl@1.1/lib" \
             -j$(sysctl -n hw.logicalcpu)
         displayName: 'Perform tools-only build'
 
-  - job: check_for_migrated_symbols_in_board_header
-    displayName: 'Check for migrated symbols in board header'
+  - job: check_for_new_CONFIG_symbols_outside_Kconfig
+    displayName: 'Check for new CONFIG symbols outside Kconfig'
     pool:
       vmImage: $(ubuntu_vm)
     container:
       image: $(ci_runner_image)
       options: $(container_option)
     steps:
-      - script: |
-          KSYMLST=`mktemp`
-          KUSEDLST=`mktemp`
-          RET=0
-          cat `find . -name "Kconfig*"` | \
-             sed -n -e 's/^\s*config *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' \
-             -e 's/^\s*menuconfig *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p' \
-             | sort -u > $KSYMLST
-          for CFG in `find include/configs -name "*.h"`; do
-             (grep '#define[[:blank:]]CONFIG_' $CFG | \
-                sed -n 's/#define.\(CONFIG_[A-Za-z0-9_]*\).*/\1/p' ; \
-                grep '#undef[[:blank:]]CONFIG_' $CFG | \
-                sed -n 's/#undef.\(CONFIG_[A-Za-z0-9_]*\).*/\1/p') | \
-                sort -u > ${KUSEDLST} || true
-             NUM=`comm -123 --total --output-delimiter=, ${KSYMLST} ${KUSEDLST} | \
-                cut -d , -f 3`
-             if [[ $NUM -ne 0 ]]; then
-                echo "Unmigrated symbols found in $CFG:"
-                comm -12 ${KSYMLST} ${KUSEDLST}
-                RET=1
-             fi
-          done
-          exit $RET
+      # If grep succeeds and finds a match the test fails as we should
+      # have no matches.
+      - script: git grep -E '^#[[:blank:]]*(define|undef)[[:blank:]]*CONFIG_'
+                  :^doc/ :^arch/arm/dts/ :^scripts/kconfig/lkc.h
+                  :^include/linux/kconfig.h :^tools/ && exit 1 || exit 0
 
   - job: cppcheck
     displayName: 'Static code analysis with cppcheck'
@@ -95,8 +77,8 @@ stages:
     steps:
       - script: cppcheck -j$(nproc) --force --quiet --inline-suppr .
 
-  - job: htmldocs
-    displayName: 'Build HTML documentation'
+  - job: docs
+    displayName: 'Build documentation'
     pool:
       vmImage: $(ubuntu_vm)
     container:
@@ -108,6 +90,7 @@ stages:
           . /tmp/venvhtml/bin/activate
           pip install -r doc/sphinx/requirements.txt
           make htmldocs
+          make infodocs
 
   - job: todo
     displayName: 'Search for TODO within source tree'
@@ -204,7 +187,7 @@ stages:
       options: $(container_option)
     steps:
       - script: |
-          export PATH=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin:$PATH
+          export PATH=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin:$PATH
           test/nokia_rx51_test.sh
 
   - job: pylint
@@ -242,7 +225,7 @@ stages:
           TEST_PY_BD: "sandbox"
         sandbox_clang:
           TEST_PY_BD: "sandbox"
-          OVERRIDE: "-O clang-13"
+          OVERRIDE: "-O clang-14"
         sandbox_nolto:
           TEST_PY_BD: "sandbox"
           BUILD_ENV: "NO_LTO=1"
@@ -257,6 +240,11 @@ stages:
           TEST_PY_TEST_SPEC: "test_ofplatdata or test_handoff or test_spl"
         sandbox_flattree:
           TEST_PY_BD: "sandbox_flattree"
+        sandbox_trace:
+          TEST_PY_BD: "sandbox"
+          BUILD_ENV: "FTRACE=1 NO_LTO=1"
+          TEST_PY_TEST_SPEC: "trace"
+          OVERRIDE: "-a CONFIG_TRACE=y -a CONFIG_TRACE_EARLY=y -a CONFIG_TRACE_EARLY_SIZE=0x01000000"
         coreboot:
           TEST_PY_BD: "coreboot"
           TEST_PY_ID: "--id qemu"
@@ -362,6 +350,7 @@ stages:
           cat << "EOF" >> test.sh
           # the below corresponds to .gitlab-ci.yml "before_script"
           cd ${WORK_DIR}
+          git config --global --add safe.directory ${WORK_DIR}
           git clone --depth=1 https://source.denx.de/u-boot/u-boot-test-hooks /tmp/uboot-test-hooks
           ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
           ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
@@ -378,6 +367,9 @@ stages:
           # the below corresponds to .gitlab-ci.yml "script"
           cd ${WORK_DIR}
           export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD};
+          if [ -n "${BUILD_ENV}" ]; then
+              export ${BUILD_ENV};
+          fi
           tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e --board ${TEST_PY_BD} ${OVERRIDE}
           cp ~/grub_x86.efi ${UBOOT_TRAVIS_BUILD_DIR}/
           cp ~/grub_x64.efi ${UBOOT_TRAVIS_BUILD_DIR}/
@@ -446,6 +438,8 @@ stages:
       matrix:
         arc_microblaze_xtensa:
           BUILDMAN: "arc microblaze xtensa"
+        amlogic:
+          BUILDMAN: "amlogic"
         arm11_arm7_arm920t_arm946es:
           BUILDMAN: "arm11 arm7 arm920t arm946es"
         arm926ejs:
@@ -475,9 +469,9 @@ stages:
         imx6:
           BUILDMAN: "mx6 -x boundary,engicam,freescale,technexion,toradex"
         imx:
-          BUILDMAN: "mx -x mx6,freescale,technexion,toradex"
-        imx8:
-          BUILDMAN: "imx8"
+          BUILDMAN: "mx -x mx6,imx8,freescale,technexion,toradex"
+        imx8_imx9:
+          BUILDMAN: "imx8 imx9"
         keystone2_keystone3:
           BUILDMAN: "k2 k3"
         sandbox_asan:
@@ -485,7 +479,7 @@ stages:
           OVERRIDE: "-a ASAN"
         sandbox_clang_asan:
           BUILDMAN: "sandbox"
-          OVERRIDE: "-O clang-13 -a ASAN"
+          OVERRIDE: "-O clang-14 -a ASAN"
         samsung_socfpga:
           BUILDMAN: "samsung socfpga"
         sun4i:
@@ -531,9 +525,11 @@ stages:
         uniphier:
           BUILDMAN: "uniphier"
         aarch64_catch_all:
-          BUILDMAN: "aarch64 -x bcm,imx8,k3,tegra,ls1,ls2,lx216,mvebu,uniphier,renesas,sunxi,samsung,socfpga,rk,versal,zynq"
-        rockchip:
-          BUILDMAN: "rk"
+          BUILDMAN: "aarch64 -x amlogic,bcm,imx8,imx9,k3,tegra,ls1,ls2,lx216,mvebu,uniphier,renesas,sunxi,samsung,socfpga,rk,versal,zynq"
+        rockchip_32bit:
+          BUILDMAN: "rk -x aarch64"
+        rockchip_64bit:
+          BUILDMAN: "rk&aarch64"
         renesas:
           BUILDMAN: "renesas"
         zynq:
@@ -549,11 +545,12 @@ stages:
           cd ${WORK_DIR}
           # make environment variables available as tests are running inside a container
           export BUILDMAN="${BUILDMAN}"
+          git config --global --add safe.directory ${WORK_DIR}
           EOF
           cat << "EOF" >> build.sh
           if [[ "${BUILDMAN}" != "" ]]; then
               ret=0;
-              tools/buildman/buildman -o /tmp -P -E -W ${BUILDMAN} ${OVERRIDE} || ret=$?;
+              tools/buildman/buildman -o /tmp -PEWM ${BUILDMAN} ${OVERRIDE} || ret=$?;
               if [[ $ret -ne 0 ]]; then
                   tools/buildman/buildman -o /tmp -seP ${BUILDMAN};
                   exit $ret;

.checkpatch.conf

@@ -4,7 +4,7 @@
 # Temporary for false positive in checkpatch
 --ignore COMPLEX_MACRO
 
-# For CONFIG_SYS_I2C_NOPROBES
+# For CFG_SYS_I2C_NOPROBES
 --ignore MULTISTATEMENT_MACRO_USE_DO_WHILE
 
 # For simple_strtoul

.gitattributes

@@ -4,3 +4,4 @@
 *.bmp binary
 *.ttf binary
 *.gz binary
+*.png binary

.gitignore

@@ -6,6 +6,7 @@
 # Normal rules (sorted alphabetically)
 #
 .*
+!.checkpatch.conf
 *.a
 *.asn1.[ch]
 *.bin
@@ -104,3 +105,6 @@ __pycache__
 # pylint files
 /pylint.cur
 /pylint.out/
+
+# moveconfig database
+/moveconfig.db

.gitlab-ci.yml

@@ -2,7 +2,7 @@
 
 # Grab our configured image.  The source for this is found
 # in the u-boot tree at tools/docker/Dockerfile
-image: trini/u-boot-gitlab-ci-runner:jammy-20221003-17Oct2022
+image: trini/u-boot-gitlab-ci-runner:jammy-20230126-10Feb2023
 
 # We run some tests in different order, to catch some failures quicker.
 stages:
@@ -14,6 +14,7 @@ stages:
   stage: test.py
   before_script:
     # Clone uboot-test-hooks
+    - git config --global --add safe.directory "${CI_PROJECT_DIR}"
     - git clone --depth=1 https://source.denx.de/u-boot/u-boot-test-hooks /tmp/uboot-test-hooks
     - ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
     - ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
@@ -34,6 +35,9 @@ stages:
     # If we've been asked to use clang only do one configuration.
     - export UBOOT_TRAVIS_BUILD_DIR=/tmp/${TEST_PY_BD}
     - echo BUILD_ENV ${BUILD_ENV}
+    - if [ -n "${BUILD_ENV}" ]; then
+        export ${BUILD_ENV};
+      fi
     - tools/buildman/buildman -o ${UBOOT_TRAVIS_BUILD_DIR} -w -E -W -e
         --board ${TEST_PY_BD} ${OVERRIDE}
     - cp ~/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/
@@ -81,7 +85,8 @@ build all 32bit ARM platforms:
   stage: world build
   script:
     - ret=0;
-      ./tools/buildman/buildman -o /tmp -P -E -W arm -x aarch64 || ret=$?;
+      git config --global --add safe.directory "${CI_PROJECT_DIR}";
+      ./tools/buildman/buildman -o /tmp -PEWM arm -x aarch64 || ret=$?;
       if [[ $ret -ne 0 ]]; then
         ./tools/buildman/buildman -o /tmp -seP;
         exit $ret;
@@ -93,7 +98,8 @@ build all 64bit ARM platforms:
     - virtualenv -p /usr/bin/python3 /tmp/venv
     - . /tmp/venv/bin/activate
     - ret=0;
-      ./tools/buildman/buildman -o /tmp -P -E -W aarch64 || ret=$?;
+      git config --global --add safe.directory "${CI_PROJECT_DIR}";
+      ./tools/buildman/buildman -o /tmp -PEWM aarch64 || ret=$?;
       if [[ $ret -ne 0 ]]; then
         ./tools/buildman/buildman -o /tmp -seP;
         exit $ret;
@@ -103,6 +109,7 @@ build all PowerPC platforms:
   stage: world build
   script:
     - ret=0;
+      git config --global --add safe.directory "${CI_PROJECT_DIR}";
       ./tools/buildman/buildman -o /tmp -P -E -W powerpc || ret=$?;
       if [[ $ret -ne 0 ]]; then
         ./tools/buildman/buildman -o /tmp -seP;
@@ -113,37 +120,22 @@ build all other platforms:
   stage: world build
   script:
     - ret=0;
-      ./tools/buildman/buildman -o /tmp -P -E -W -x arm,powerpc || ret=$?;
+      git config --global --add safe.directory "${CI_PROJECT_DIR}";
+      ./tools/buildman/buildman -o /tmp -PEWM -x arm,powerpc || ret=$?;
       if [[ $ret -ne 0 ]]; then
         ./tools/buildman/buildman -o /tmp -seP;
         exit $ret;
       fi;
 
-check for migrated symbols in board header:
+check for new CONFIG symbols outside Kconfig:
   stage: testsuites
   script:
-    - KSYMLST=`mktemp`;
-      KUSEDLST=`mktemp`;
-      RET=0;
-      cat `find . -name "Kconfig*"` |
-         sed -n -e 's/^\s*config *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p'
-         -e 's/^\s*menuconfig *\([A-Za-z0-9_]*\).*$/CONFIG_\1/p'
-         | sort -u > $KSYMLST;
-      for CFG in `find include/configs -name "*.h"`; do
-         (grep '#define[[:blank:]]CONFIG_' $CFG |
-            sed -n 's/#define.\(CONFIG_[A-Za-z0-9_]*\).*/\1/p' ;
-            grep '#undef[[:blank:]]CONFIG_' $CFG |
-            sed -n 's/#undef.\(CONFIG_[A-Za-z0-9_]*\).*/\1/p') |
-            sort -u > ${KUSEDLST} || true;
-         NUM=`comm -123 --total --output-delimiter=, ${KSYMLST} ${KUSEDLST} |
-            cut -d , -f 3`;
-         if [[ $NUM -ne 0 ]]; then
-            echo "Unmigrated symbols found in $CFG:";
-            comm -12 ${KSYMLST} ${KUSEDLST};
-            RET=1;
-         fi;
-      done;
-      exit $RET
+    - git config --global --add safe.directory "${CI_PROJECT_DIR}"
+    # If grep succeeds and finds a match the test fails as we should
+    # have no matches.
+    - git grep -E '^#[[:blank:]]*(define|undef)[[:blank:]]*CONFIG_'
+        :^doc/ :^arch/arm/dts/ :^scripts/kconfig/lkc.h
+        :^include/linux/kconfig.h :^tools/ && exit 1 || exit 0
 
 # QA jobs for code analytics
 # static code analysis with cppcheck (we can add --enable=all later)
@@ -161,14 +153,15 @@ grep TODO/FIXME/HACK:
     # search for HACK within source tree and ignore HACKKIT board
     - grep -r HACK . | grep -v HACKKIT
 
-# build HTML documentation
-htmldocs:
+# build documentation
+docs:
   stage: testsuites
   script:
     - virtualenv -p /usr/bin/python3 /tmp/venvhtml
     - . /tmp/venvhtml/bin/activate
     - pip install -r doc/sphinx/requirements.txt
     - make htmldocs
+    - make infodocs
 
 # some statistics about the code base
 sloccount:
@@ -220,7 +213,7 @@ Run binman, buildman, dtoc, Kconfig and patman testsuites:
 Run tests for Nokia RX-51 (aka N900):
   stage: testsuites
   script:
-    - export PATH=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin:$PATH;
+    - export PATH=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin:$PATH;
       test/nokia_rx51_test.sh
 
 # Check for any pylint regressions
@@ -251,7 +244,7 @@ sandbox test.py:
 sandbox with clang test.py:
   variables:
     TEST_PY_BD: "sandbox"
-    OVERRIDE: "-O clang-13"
+    OVERRIDE: "-O clang-14"
   <<: *buildman_and_testpy_dfn
 
 sandbox without LTO test.py:
@@ -278,6 +271,15 @@ sandbox_vpl test.py:
     TEST_PY_TEST_SPEC: "test_vpl_help or test_spl"
   <<: *buildman_and_testpy_dfn
 
+# Enable tracing and disable LTO, to ensure functions are not elided
+sandbox trace_test.py:
+  variables:
+    TEST_PY_BD: "sandbox"
+    BUILD_ENV: "FTRACE=1 NO_LTO=1"
+    TEST_PY_TEST_SPEC: "trace"
+    OVERRIDE: "-a CONFIG_TRACE=y -a CONFIG_TRACE_EARLY=y -a CONFIG_TRACE_EARLY_SIZE=0x01000000"
+  <<: *buildman_and_testpy_dfn
+
 evb-ast2500 test.py:
   variables:
     TEST_PY_BD: "evb-ast2500"

.mailmap

@@ -26,6 +26,7 @@ Bin Meng <bmeng.cn@gmail.com> <bin.meng@windriver.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@bootlin.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@free-electrons.com>
 Dirk Behme <dirk.behme@googlemail.com>
+Eugen Hristev <eugen.hristev@collabora.com> <eugen.hristev@microchip.com>
 Fabio Estevam <fabio.estevam@nxp.com>
 Heinrich Schuchardt <xypron.glpk@gmx.de> <heinrich.schuchardt@canonical.com>
 Heinrich Schuchardt <xypron.glpk@gmx.de> xypron.glpk@gmx.de <xypron.glpk@gmx.de>

Kconfig

@@ -264,8 +264,8 @@ config HAS_CUSTOM_SYS_INIT_SP_ADDR
 	default y if TFABOOT
 	help
 	  Typically, we use an initial stack pointer address that is calculated
-	  by taking the statically defined CONFIG_SYS_INIT_RAM_ADDR, adding the
-	  statically defined CONFIG_SYS_INIT_RAM_SIZE and then subtracting the
+	  by taking the statically defined CFG_SYS_INIT_RAM_ADDR, adding the
+	  statically defined CFG_SYS_INIT_RAM_SIZE and then subtracting the
 	  build-time constant of GENERATED_GBL_DATA_SIZE.  On MIPS a different
 	  but statica calculation is performed.  However, some platforms will
 	  take a different approach.  Say Y here to define the address statically
@@ -333,7 +333,7 @@ config SPL_SYS_MALLOC_F_LEN
 	  particular needs this to operate, so that it can allocate the
 	  initial serial device and any others that are needed.
 
-	  It is possible to enable CONFIG_SYS_SPL_MALLOC_START to start a new
+	  It is possible to enable CFG_SYS_SPL_MALLOC_START to start a new
 	  malloc() region in SDRAM once it is inited.
 
 config TPL_SYS_MALLOC_F_LEN
@@ -456,11 +456,12 @@ config BUILD_TARGET
 	string "Build target special images"
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_ARRIA10
 	default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
-	default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
+	default "u-boot-with-spl.kwb" if ARMADA_32BIT && SPL
 	default "u-boot-elf.srec" if RCAR_GEN3
 	default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
 				ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
-	default "u-boot.kwb" if ARCH_KIRKWOOD
+	default "u-boot.kwb" if (ARCH_KIRKWOOD || ARMADA_32BIT) && !SPL
+	default "u-boot-with-spl.bin" if MPC85xx && !E500MC && !E5500 && !E6500 && SPL
 	default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
 	default "u-boot-with-spl.imx" if ARCH_MX6 && SPL
 	help
@@ -583,6 +584,18 @@ config SYS_SRAM_SIZE
 	default 0x10000 if TARGET_TRICORDER
 	default 0x0
 
+config SYS_MONITOR_LEN
+	int "Maximum size in bytes reserved for U-Boot in memory"
+	default 1048576 if X86
+	default 786432 if ARCH_SUNXI
+	default 0
+	help
+	  Size of memory reserved for monitor code, used to determine
+	  _at_compile_time_ (!) if the environment is embedded within the
+	  U-Boot image, or in a separate flash sector, among other uses where
+	  we need to set a maximum size of the U-Boot binary itself that will
+	  be loaded.
+
 config MP
 	bool "Support for multiprocessor"
 	help

MAINTAINERS

@@ -122,6 +122,7 @@ F:	arch/arm/mach-apple/
 F:	configs/apple_m1_defconfig
 F:	drivers/iommu/apple_dart.c
 F:	drivers/nvme/nvme_apple.c
+F:	drivers/pci/pcie_apple.c
 F:	drivers/pinctrl/pinctrl-apple.c
 F:	drivers/watchdog/apple_wdt.c
 F:	include/configs/apple.h
@@ -149,6 +150,7 @@ L:	u-boot-amlogic@groups.io
 T:	git https://source.denx.de/u-boot/custodians/u-boot-amlogic.git
 F:	arch/arm/mach-meson/
 F:	arch/arm/include/asm/arch-meson/
+F:	cmd/meson/
 F:	drivers/clk/meson/
 F:	drivers/serial/serial_meson.c
 F:	drivers/reset/reset-meson.c
@@ -192,6 +194,7 @@ N:	aspeed
 
 ARM BROADCOM BCM283X / BCM27XX
 M:	Matthias Brugger <mbrugger@suse.com>
+M:	Peter Robinson <pbrobinson@gmail.com>
 S:	Maintained
 F:	arch/arm/dts/bcm283*
 F:	arch/arm/mach-bcm283x/
@@ -408,11 +411,21 @@ T:	git https://source.denx.de/u-boot/custodians/u-boot-atmel.git
 F:	arch/arm/mach-at91/
 F:	board/atmel/
 F:	drivers/cpu/at91_cpu.c
+F:	drivers/memory/atmel-ebi.c
 F:	drivers/misc/microchip_flexcom.c
 F:	drivers/timer/atmel_tcb_timer.c
 F:	include/dt-bindings/mfd/atmel-flexcom.h
 F:	drivers/timer/mchp-pit64b-timer.c
 
+ARM MSC SM2S IMX8MP SOM
+M:	Martyn Welch <martyn.welch@collabora.com>
+M:	Ian Ray <ian.ray@ge.com>
+S:	Maintained
+F:	arch/arm/dts/imx8mp-msc-sm2s*
+F:	board/msc/sm2s_imx8mp/
+F:	configs/msc_sm2s_imx8mp_defconfig
+F:	include/configs/msc_sm2s_imx8mp.h
+
 ARM NEXELL S5P4418
 M:	Stefan Bosch <stefan_b@posteo.net>
 S:	Maintained
@@ -426,6 +439,7 @@ F:	drivers/gpio/nx_gpio.c
 F:	drivers/i2c/nx_i2c.c
 F:	drivers/mmc/nexell_dw_mmc_dm.c
 F:	drivers/pinctrl/nexell/
+F:	drivers/serial/serial_s5p4418_pl011.c
 F:	drivers/video/nexell/
 F:	drivers/video/nexell_display.c
 F:	include/configs/s5p4418_nanopi2.h
@@ -485,6 +499,12 @@ F:	arch/arm/mach-exynos/
 F:	arch/arm/mach-s5pc1xx/
 F:	arch/arm/cpu/armv7/s5p-common/
 
+ARM SANCLOUD
+M:	Paul Barker <paul.barker@sancloud.com>
+R:	Marc Murphy <marc.murphy@sancloud.com>
+S:	Supported
+F:	arch/arm/dts/am335x-sancloud*
+
 ARM SNAPDRAGON
 M:	Ramon Fried <rfried.dev@gmail.com>
 S:	Maintained
@@ -552,10 +572,9 @@ F:	drivers/spi/stm32_spi.c
 F:	drivers/video/stm32/stm32_ltdc.c
 F:	drivers/watchdog/stm32mp_wdt.c
 F:	include/dt-bindings/clock/stm32fx-clock.h
-F:	include/dt-bindings/clock/stm32mp1-clks.h
-F:	include/dt-bindings/clock/stm32mp1-clksrc.h
+F:	include/dt-bindings/clock/stm32mp*
 F:	include/dt-bindings/pinctrl/stm32-pinfunc.h
-F:	include/dt-bindings/reset/stm32mp1-resets.h
+F:	include/dt-bindings/reset/stm32mp*
 F:	include/stm32_rcc.h
 F:	tools/stm32image.c
 N:	stm
@@ -627,6 +646,7 @@ F:	drivers/soc/ti/
 F:	drivers/sysreset/sysreset-ti-sci.c
 F:	drivers/thermal/ti-bandgap.c
 F:	drivers/timer/omap-timer.c
+F:	drivers/video/tidss/
 F:	drivers/watchdog/omap_wdt.c
 F:	include/linux/pruss_driver.h
 F:	include/linux/soc/ti/
@@ -655,6 +675,7 @@ M:	Michal Simek <michal.simek@amd.com>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
 F:	arch/arm/mach-versal-net/
+F:	drivers/soc/soc_xilinx_versal_net.c
 N:	(?<!uni)versal-net
 
 ARM VERSAL
@@ -753,6 +774,12 @@ S:	Maintained
 F:	drivers/pci/pcie_phytium.c
 F:	arch/arm/dts/phytium-durian.dts
 
+ASPEED AST2600 I2C DRIVER
+M:	Ryan Chen <ryan_chen@aspeedtech.com>
+R:	Aspeed BMC SW team <BMC-SW@aspeedtech.com>
+S:	Maintained
+F:	drivers/i2c/ast2600_i2c.c
+
 ASPEED FMC SPI DRIVER
 M:	Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
 M:	Cédric Le Goater <clg@kaod.org>
@@ -823,7 +850,7 @@ F:	drivers/clk/imx/
 
 COLDFIRE
 M:	Huan Wang <alison.wang@nxp.com>
-M:	Angelo Dureghello <angelo@sysam.it>
+M:	Angelo Dureghello <angelo@kernel-space.org>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-coldfire.git
 F:	arch/m68k/
@@ -844,7 +871,6 @@ F:	cmd/dfu.c
 F:	cmd/usb_*.c
 F:	common/dfu.c
 F:	common/update.c
-F:	common/usb_storage.c
 F:	doc/api/dfu.rst
 F:	doc/usage/dfu.rst
 F:	drivers/dfu/
@@ -879,6 +905,11 @@ M:	Heinrich Schuchardt <xypron.glpk@gmx.de>
 M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-efi.git
+F:	arch/arm/lib/*_efi.*
+F:	cmd/bootefi.c
+F:	cmd/eficonfig.c
+F:	cmd/efidebug.c
+F:	cmd/nvedit_efi.c
 F:	doc/api/efi.rst
 F:	doc/develop/uefi/*
 F:	doc/mkeficapsule.1
@@ -1176,6 +1207,7 @@ M:	Sean Anderson <seanga2@gmail.com>
 S:	Maintained
 F:	doc/api/nvmem.rst
 F:	drivers/misc/nvmem.c
+F:	drivers/reboot-mode/reboot-mode-nvmem.c
 F:	include/nvmem.h
 
 NXP C45 TJA11XX PHY DRIVER
@@ -1222,6 +1254,7 @@ M:	Jaehoon Chung <jh80.chung@samsung.com>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-pmic.git
 F:	drivers/power/
+F:	include/power/
 
 POWERPC
 M:	Wolfgang Denk <wd@denx.de>
@@ -1304,6 +1337,13 @@ F:	arch/sandbox/
 F:	doc/arch/sandbox.rst
 F:	include/dt-bindings/*/sandbox*.h
 
+SEAMA
+M:	Linus Walleij <linus.walleij@linaro.org>
+S:	Maintained
+F:	cmd/seama.c
+F:	doc/usage/cmd/seama.rst
+F:	test/cmd/seama.c
+
 SEMIHOSTING
 R:	Sean Anderson <sean.anderson@seco.com>
 S:	Orphaned
@@ -1429,6 +1469,7 @@ F:	configs/j721s2_hs_evm_r5_defconfig
 TPM DRIVERS
 M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
 S:	Maintained
+T:	git https://source.denx.de/u-boot/custodians/u-boot-tpm.git
 F:	drivers/tpm/
 
 TQ GROUP
@@ -1438,6 +1479,8 @@ T:	git git://git.denx.de/u-boot-tq-group.git
 
 TEE
 M:	Jens Wiklander <jens.wiklander@linaro.org>
+M:	Ilias Apalodimas <ilias.apalodimas@linaro.org>
+T:	git https://source.denx.de/u-boot/custodians/u-boot-tpm.git
 S:	Maintained
 F:	drivers/tee/
 F:	include/tee.h
@@ -1467,6 +1510,7 @@ T:	git https://source.denx.de/u-boot/custodians/u-boot-usb.git
 F:	drivers/usb/
 F:	common/usb.c
 F:	common/usb_kbd.c
+F:	common/usb_storage.c
 F:	include/usb.h
 
 USB xHCI

Makefile

@@ -1,9 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-VERSION = 2022
-PATCHLEVEL = 10
+VERSION = 2023
+PATCHLEVEL = 04
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc2
 NAME =
 
 # *DOCUMENTATION*
@@ -318,8 +318,8 @@ endif
 #
 ifeq ($(HOSTOS),darwin)
 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
-DARWIN_MAJOR_VERSION	= $(shell sw_vers -productVersion | cut -f 1 -d '.')
-DARWIN_MINOR_VERSION	= $(shell sw_vers -productVersion | cut -f 2 -d '.')
+DARWIN_MAJOR_VERSION	:= $(shell sw_vers -productVersion | cut -f 1 -d '.')
+DARWIN_MINOR_VERSION	:= $(shell sw_vers -productVersion | cut -f 2 -d '.')
 
 os_x_before	= $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 	$(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
@@ -761,10 +761,10 @@ KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized)
 # change __FILE__ to the relative path from the srctree
 KBUILD_CFLAGS	+= $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 
-KBUILD_CFLAGS	+= -g
+KBUILD_CFLAGS	+= -gdwarf-4
 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
 # option to the assembler.
-KBUILD_AFLAGS	+= -g
+KBUILD_AFLAGS	+= -gdwarf-4
 
 # Report stack usage if supported
 # ARC tools based on GCC 7.1 has an issue with stack usage
@@ -806,6 +806,8 @@ KBUILD_CPPFLAGS += $(KCPPFLAGS)
 KBUILD_AFLAGS += $(KAFLAGS)
 KBUILD_CFLAGS += $(KCFLAGS)
 
+KBUILD_LDFLAGS  += $(call ld-option,--no-warn-rwx-segments)
+
 KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
 
 # Use UBOOTINCLUDE when you must reference the include/ directory.
@@ -1004,14 +1006,9 @@ ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy)
 INPUTS-y += init_sp_bss_offset_check
 endif
 
-ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy)
-# Binman image dependencies
-ifeq ($(CONFIG_ARM64),y)
-INPUTS-y += u-boot.itb
-else
+ifeq ($(CONFIG_ARCH_ROCKCHIP)_$(CONFIG_SPL_FRAMEWORK),y_)
 INPUTS-y += u-boot.img
 endif
-endif
 
 INPUTS-$(CONFIG_X86) += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
 	$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
@@ -1073,10 +1070,6 @@ cmd_lzma = lzma -c -z -k -9 $< > $@
 
 cfg: u-boot.cfg
 
-quiet_cmd_cfgcheck = CFGCHK  $2
-cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
-		$(srctree)/scripts/config_whitelist.txt $(srctree)
-
 quiet_cmd_ofcheck = OFCHK   $2
 cmd_ofcheck = $(srctree)/scripts/check-of.sh $2 \
 		$(srctree)/scripts/of_allowlist.txt
@@ -1089,7 +1082,7 @@ expect = $(foreach cfg,$(1),y)
 
 # Show a deprecation message
 # Args:
-# 1: List of CONFIG_DM_... to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
+# 1: List of options to migrate to (e.g. "CONFIG_DM_MMC CONFIG_BLK")
 # 2: Name of component (e.g . "Ethernet drivers")
 # 3: Release deadline (e.g. "v202.07")
 # 4: Condition to require before checking (e.g. "$(CONFIG_NET)")
@@ -1108,18 +1101,15 @@ define deprecated
 
 endef
 
-PHONY += inputs
-inputs: $(INPUTS-y)
-
-all: .binman_stamp inputs
+# Timestamp file to make sure that binman always runs
+.binman_stamp: $(INPUTS-y) FORCE
 ifeq ($(CONFIG_BINMAN),y)
 	$(call if_changed,binman)
 endif
-
-# Timestamp file to make sure that binman always runs
-.binman_stamp: FORCE
 	@touch $@
 
+all: .binman_stamp
+
 ifeq ($(CONFIG_DEPRECATED),y)
 	$(warning "You have deprecated configuration options enabled in your .config! Please check your configuration.")
 endif
@@ -1141,16 +1131,12 @@ endif
 	$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
 		$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
 	$(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY))
-	@# CONFIG_SYS_TIMER_RATE has brackets in it for some boards which
+	@# CFG_SYS_TIMER_RATE has brackets in it for some boards which
 	@# confuses this rule. Use if() to send just a single character which
 	@# is enable to tell 'deprecated' that one of these symbols exists
-	$(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CONFIG_SYS_TIMER_RATE)$(CONFIG_SYS_TIMER_COUNTER)),x))
+	$(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CFG_SYS_TIMER_RATE)$(CFG_SYS_TIMER_COUNTER)),x))
 	$(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL))
 	$(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI))
-	@# Check that this build does not use CONFIG options that we do not
-	@# know about unless they are in Kconfig. All the existing CONFIG
-	@# options are whitelisted, so new ones should not be added.
-	$(call cmd,cfgcheck,u-boot.cfg)
 	@# Check that this build does not override OF_HAS_PRIOR_STAGE by
 	@# disabling OF_BOARD.
 	$(call cmd,ofcheck,$(KCONFIG_CONFIG))
@@ -1204,19 +1190,22 @@ endif
 u-boot.bin: u-boot-fit-dtb.bin FORCE
 	$(call if_changed,copy)
 
-u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
-	$(call if_changed,cat)
-
-else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
-u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
-	$(call if_changed,cat)
-
 ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
-u-boot.bin: u-boot-dtb.bin FORCE
-	$(call if_changed,copy)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+	$(call if_changed,cat)
 endif
 
-else ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+else ifeq ($(CONFIG_OF_SEPARATE).$(CONFIG_OF_OMIT_DTB),y.)
+
+ifneq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
+u-boot-dtb.bin: u-boot-nodtb.bin dts/dt.dtb FORCE
+	$(call if_changed,cat)
+endif
+
+u-boot.bin: u-boot-dtb.bin FORCE
+	$(call if_changed,copy)
+
+else
 u-boot.bin: u-boot-nodtb.bin FORCE
 	$(call if_changed,copy)
 endif
@@ -1336,8 +1325,8 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
 		$(foreach f,$(BINMAN_TOOLPATHS),--toolpath $(f)) \
                 --toolpath $(objtree)/tools \
 		$(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
-		build -u -d u-boot.dtb -O . -m --allow-missing \
-		--fake-ext-blobs \
+		build -u -d u-boot.dtb -O . -m \
+		$(if $(BINMAN_ALLOW_MISSING),--allow-missing --ignore-missing) \
 		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
 		-I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
 		$(foreach f,$(BINMAN_INDIRS),-I $(f)) \
@@ -1364,8 +1353,8 @@ u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 # U-Boot entry point, needed for booting of full-blown U-Boot
 # from the SPL U-Boot version.
 #
-ifndef CONFIG_SYS_UBOOT_START
-CONFIG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
+ifndef CFG_SYS_UBOOT_START
+CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE)
 endif
 
 # Boards with more complex image requirements can provide an .its source file
@@ -1379,9 +1368,6 @@ $(U_BOOT_ITS): $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
 else
 ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
 U_BOOT_ITS := u-boot.its
-ifeq ($(CONFIG_SPL_FIT_GENERATOR),"arch/arm/mach-rockchip/make_fit_atf.py")
-U_BOOT_ITS_DEPS += u-boot
-endif
 $(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
 	$(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
 	$(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
@@ -1390,7 +1376,7 @@ endif
 
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
 	-p $(CONFIG_FIT_EXTERNAL_OFFSET) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \
@@ -1398,10 +1384,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	$(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST)))
 else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
 endif
@@ -1422,7 +1408,7 @@ KWD_CONFIG_FILE = $(shell \
 MKIMAGEFLAGS_u-boot.kwb = -n $(KWD_CONFIG_FILE) \
 	-T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE)
 
-MKIMAGEFLAGS_u-boot-spl.kwb = -n $(KWD_CONFIG_FILE) \
+MKIMAGEFLAGS_u-boot-with-spl.kwb = -n $(KWD_CONFIG_FILE) \
 	-T kwbimage -a $(CONFIG_TEXT_BASE) -e $(CONFIG_TEXT_BASE) \
 	$(if $(KEYDIR),-k $(KEYDIR))
 
@@ -1432,7 +1418,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
 UBOOT_BIN := u-boot.bin
 
 MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \
-	-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+	-a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \
 	-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 
 u-boot.bin.lzma: u-boot.bin FORCE
@@ -1458,18 +1444,16 @@ MKIMAGEFLAGS_u-boot.itb += -B 0x8
 ifdef U_BOOT_ITS
 u-boot.itb: u-boot-nodtb.bin \
 		$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
+		$(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
 		$(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
 	$(BOARD_SIZE_CHECK)
 endif
 
-u-boot-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
+u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 	$(BOARD_SIZE_CHECK)
 
-u-boot.sha1:	u-boot.bin
-		tools/ubsha1 u-boot.bin
-
 u-boot.dis:	u-boot
 		$(OBJDUMP) -d $< > $@
 
@@ -1486,7 +1470,6 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
 
-
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
 
@@ -1545,8 +1528,7 @@ MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_TEXT_BASE)
 u-boot.ubl: u-boot-with-spl.bin FORCE
 	$(call if_changed,mkimage)
 
-MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
-	$(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
+MKIMAGEFLAGS_u-boot-spl.ais = -s -n "/dev/null" \
 	-T aisimage -e $(CONFIG_SPL_TEXT_BASE)
 spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
@@ -1598,7 +1580,7 @@ u-boot-with-nand-spl.sfp: u-boot-spl-padx4.sfp u-boot.img FORCE
 endif
 
 ifeq ($(CONFIG_MPC85XX_HAVE_RESET_VECTOR)$(CONFIG_OF_SEPARATE),yy)
-u-boot.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
+u-boot-dtb.bin: u-boot-nodtb.bin u-boot.dtb u-boot-br.bin FORCE
 	$(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-br.bin := -O binary -j .bootpg -j .resetvec
@@ -1670,17 +1652,6 @@ OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL
 u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
 	$(call if_changed,pad_cat)
 
-# PPC4xx needs the SPL at the end of the image, since the reset vector
-# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
-# and need to introduce a new build target with the full blown U-Boot
-# at the start padded up to the start of the SPL image. And then concat
-# the SPL image to the end.
-
-OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
-	--pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
-u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
-	$(call if_changed,pad_cat)
-
 quiet_cmd_u-boot-elf ?= LD      $@
 	cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
 	$(if $(CONFIG_SYS_BIG_ENDIAN),-EB,-EL) \
@@ -2022,10 +1993,6 @@ dtbs: prepare3 scripts_dtc
 dtbs_install:
 	$(Q)$(MAKE) $(dtbinst)=$(dtstree)
 
-ifdef CONFIG_OF_EARLY_FLATTREE
-all: dtbs
-endif
-
 endif
 
 # Check dtc and pylibfdt, if DTC is provided, else build them
@@ -2375,7 +2342,7 @@ tcheck:
 # Documentation targets
 # ---------------------------------------------------------------------------
 DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \
-	       linkcheckdocs dochelp refcheckdocs
+	       linkcheckdocs dochelp refcheckdocs texinfodocs infodocs
 PHONY += $(DOC_TARGETS)
 $(DOC_TARGETS): scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=doc $@
@@ -2442,11 +2409,13 @@ endif
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
 
 quiet_cmd_genenv = GENENV  $@
-cmd_genenv = $(OBJCOPY) --dump-section .rodata.default_environment=$@ env/common.o; \
-	sed --in-place -e 's/\x00/\x0A/g' $@; sed --in-place -e '/^\s*$$/d' $@; \
-	sort --field-separator== -k1,1 --stable $@ -o $@
+cmd_genenv = \
+	$(objtree)/tools/printinitialenv | \
+	sed -e '/^\s*$$/d' | \
+	sort --field-separator== -k1,1 --stable -o $@
 
-u-boot-initial-env: u-boot.bin
+u-boot-initial-env: $(env_h) FORCE
+	$(Q)$(MAKE) $(build)=tools $(objtree)/tools/printinitialenv
 	$(call if_changed,genenv)
 
 # Consistency checks

api/Kconfig

@@ -5,4 +5,28 @@ config API
 	help
 	  This option enables the U-Boot API. See api/README for more information.
 
+config SYS_MMC_MAX_DEVICE
+	int  "Maximum number of MMC devices exposed via the API"
+	depends on API
+	default 1
+
 endmenu
+
+config STANDALONE_LOAD_ADDR
+	hex "Address in memory to link standalone applications to"
+	default 0xffffffff80200000 if MIPS && 64BIT
+	default 0x8c000000 if SH
+	default 0x82000000 if ARC
+	default 0x80f00000 if MICROBLAZE
+	default 0x80300000 if ARCH_OMAP2PLUS || FSL_LSCH2 || FSL_LSCH3
+	default 0x80200000 if MIPS && 32BIT
+	default 0x0c100000 if ARM
+	default 0x02000000 if NIOS2
+	default 0x00040000 if PPC || X86
+	default 0x00020000 if M68K
+	default 0x0 if RISCV
+	default SYS_LOAD_ADDR
+	help
+	  This option defines a board specific value for the address where
+	  standalone program gets loaded, thus overwriting the architecture
+	  dependent default settings.

api/api_storage.c

@@ -44,10 +44,6 @@ struct stor_spec {
 
 static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, NULL }, };
 
-#ifndef CONFIG_SYS_MMC_MAX_DEVICE
-#define CONFIG_SYS_MMC_MAX_DEVICE	1
-#endif
-
 void dev_stor_init(void)
 {
 #if defined(CONFIG_IDE)

arch/Kconfig

@@ -93,7 +93,7 @@ config NIOS2
 	bool "Nios II architecture"
 	select CPU
 	select DM
-	imply DM_EVENT
+	select DM_EVENT
 	select OF_CONTROL
 	select SUPPORT_OF_CONTROL
 	imply CMD_DM
@@ -111,10 +111,9 @@ config RISCV
 	select SUPPORT_OF_CONTROL
 	select OF_CONTROL
 	select DM
-	select SPL_SEPARATE_BSS if SPL
+	select DM_EVENT
+	imply SPL_SEPARATE_BSS if SPL
 	imply DM_SERIAL
-	imply DM_ETH
-	imply DM_EVENT
 	imply DM_MMC
 	imply DM_SPI
 	imply DM_SPI_FLASH
@@ -137,6 +136,7 @@ config SANDBOX
 	select BZIP2
 	select CMD_POWEROFF
 	select DM
+	select DM_EVENT
 	select DM_FUZZING_ENGINE
 	select DM_GPIO
 	select DM_I2C
@@ -146,6 +146,7 @@ config SANDBOX
 	select DM_SPI
 	select DM_SPI_FLASH
 	select GZIP_COMPRESSED
+	select IO_TRACE
 	select LZO
 	select OF_BOARD_SETUP
 	select PCI_ENDPOINT
@@ -240,8 +241,6 @@ config X86
 	imply CMD_SF
 	imply CMD_SF_TEST
 	imply CMD_ZBOOT
-	imply DM_ETH
-	imply DM_EVENT
 	imply DM_GPIO
 	imply DM_KEYBOARD
 	imply DM_MMC
@@ -381,9 +380,15 @@ config SYS_IMMR
 	  Address for the Internal Memory-Mapped Registers (IMMR) window used
 	  to configure the features of many Freescale / NXP SoCs.
 
-config SKIP_LOWLEVEL_INIT
-	bool "Skip the calls to certain low level initialization functions"
+config MONITOR_IS_IN_RAM
+	bool "U-Boot is loaded in to RAM by a pre-loader"
+	depends on M68K || NIOS2
+
+menu "Skipping low level initialization functions"
 	depends on ARM || MIPS || RISCV
+
+config SKIP_LOWLEVEL_INIT
+	bool "Skip calls to certain low level initialization functions"
 	help
 	  If enabled, then certain low level initializations (like setting up
 	  the memory controller) are omitted and/or U-Boot does not relocate
@@ -393,8 +398,8 @@ config SKIP_LOWLEVEL_INIT
 	  debugger which performs these initializations itself.
 
 config SPL_SKIP_LOWLEVEL_INIT
-	bool "Skip the calls to certain low level initialization functions"
-	depends on SPL && (ARM || MIPS || RISCV)
+	bool "Skip calls to certain low level initialization functions in SPL"
+	depends on SPL
 	help
 	  If enabled, then certain low level initializations (like setting up
 	  the memory controller) are omitted and/or U-Boot does not relocate
@@ -404,7 +409,7 @@ config SPL_SKIP_LOWLEVEL_INIT
 	  debugger which performs these initializations itself.
 
 config TPL_SKIP_LOWLEVEL_INIT
-	bool "Skip the calls to certain low level initialization functions"
+	bool "Skip calls to certain low level initialization functions in TPL"
 	depends on SPL && ARM
 	help
 	  If enabled, then certain low level initializations (like setting up
@@ -415,7 +420,7 @@ config TPL_SKIP_LOWLEVEL_INIT
 	  debugger which performs these initializations itself.
 
 config SKIP_LOWLEVEL_INIT_ONLY
-	bool "Skip the call to lowlevel_init during early boot ONLY"
+	bool "Skip call to lowlevel_init during early boot ONLY"
 	depends on ARM
 	help
 	  This allows just the call to lowlevel_init() to be skipped. The
@@ -423,7 +428,7 @@ config SKIP_LOWLEVEL_INIT_ONLY
 	  performed.
 
 config SPL_SKIP_LOWLEVEL_INIT_ONLY
-	bool "Skip the call to lowlevel_init during early boot ONLY"
+	bool "Skip call to lowlevel_init during early SPL boot ONLY"
 	depends on SPL && ARM
 	help
 	  This allows just the call to lowlevel_init() to be skipped. The
@@ -431,13 +436,39 @@ config SPL_SKIP_LOWLEVEL_INIT_ONLY
 	  performed.
 
 config TPL_SKIP_LOWLEVEL_INIT_ONLY
-	bool "Skip the call to lowlevel_init during early boot ONLY"
+	bool "Skip call to lowlevel_init during early TPL boot ONLY"
 	depends on TPL && ARM
 	help
 	  This allows just the call to lowlevel_init() to be skipped. The
 	  normal CP15 init (such as enabling the instruction cache) is still
 	  performed.
 
+endmenu
+
+config SYS_HAS_NONCACHED_MEMORY
+	bool "Enable reserving a non-cached memory area for drivers"
+	depends on (ARM || MIPS) && (RTL8169 || MEDIATEK_ETH)
+	help
+	  This is useful for drivers that would otherwise require a lot of
+	  explicit cache maintenance. For some drivers it's also impossible to
+	  properly maintain the cache. For example if the regions that need to
+	  be flushed are not a multiple of the cache-line size, *and* padding
+	  cannot be allocated between the regions to align them (i.e.  if the
+	  HW requires a contiguous array of regions, and the size of each
+	  region is not cache-aligned), then a flush of one region may result
+	  in overwriting data that hardware has written to another region in
+	  the same cache-line. This can happen for example in network drivers
+	  where descriptors for buffers are typically smaller than the CPU
+	  cache-line (e.g.  16 bytes vs. 32 or 64 bytes).
+
+config SYS_NONCACHED_MEMORY
+	hex "Size in bytes of the non-cached memory area"
+	depends on SYS_HAS_NONCACHED_MEMORY
+	default 0x100000
+	help
+	  Size of non-cached memory area. This area of memory will be typically
+	  located right below the malloc() area and mapped uncached in the MMU.
+
 source "arch/arc/Kconfig"
 source "arch/arm/Kconfig"
 source "arch/m68k/Kconfig"

arch/Kconfig.nxp

@@ -1,5 +1,12 @@
+menu "Functionality shared between NXP SoCs"
+
+config FSL_TRUST_ARCH_v1
+	bool
+
 config NXP_ESBC
 	bool "NXP ESBC (secure boot) functionality"
+	select FSL_TRUST_ARCH_v1 if ARCH_P3041 || ARCH_P4080 || \
+		ARCH_P5040 || ARCH_P2041
 	help
 	  Enable Freescale Secure Boot feature. Normally selected by defconfig.
 	  If unsure, do not change.
@@ -10,6 +17,7 @@ menu "Chain of trust / secure boot options"
 config CHAIN_OF_TRUST
 	select FSL_CAAM
 	select ARCH_MISC_INIT
+	select FSL_ISBC_KEY_EXT if (ARM || FSL_CORENET) && !SYS_RAMBOOT
 	select FSL_SEC_MON
 	select SPL_BOARD_INIT if (ARM && SPL)
 	select SPL_HASH if (ARM && SPL)
@@ -41,6 +49,17 @@ config ESBC_ADDR_64BIT
 	help
 	  For Layerscape based platforms, ESBC image Address in Header is 64bit.
 
+config FSL_ISBC_KEY_EXT
+	bool
+	help
+	  The key used for verification of next level images is picked up from
+	  an Extension Table which has been verified by the ISBC (Internal
+	  Secure boot Code) in boot ROM of the SoC.  The feature is only
+	  applicable in case of NOR boot and is not applicable in case of
+	  RAMBOOT (NAND, SD, SPI).  For Layerscape, this feature is available
+	  for all device if IE Table is copied to XIP memory Also, for
+	  Layerscape, ISBC doesn't verify this table.
+
 config SYS_FSL_SFP_BE
 	def_bool y
 	depends on PPC || FSL_LSCH2 || ARCH_LS1021A
@@ -125,8 +144,6 @@ config KEY_REVOCATION
 
 endmenu
 
-comment "Other functionality shared between NXP SoCs"
-
 config DEEP_SLEEP
 	bool "Enable SoC deep sleep feature"
 	depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A
@@ -239,6 +256,20 @@ config SYS_FSL_ESDHC_BE
 config SYS_FSL_IFC_BE
 	bool
 
+config SYS_FSL_IFC_BANK_COUNT
+	int "Maximum banks of Integrated flash controller"
+	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || \
+		ARCH_LS1088A || ARCH_LS1021A || ARCH_B4860 || ARCH_B4420 || \
+		ARCH_T4240 || ARCH_T1040 || ARCH_T1042 || ARCH_T1024 || \
+		ARCH_T2080 || ARCH_C29X || ARCH_P1010 || ARCH_BSC9131 || \
+		ARCH_BSC9132
+	default 3 if ARCH_BSC9131 || ARCH_BSC9132
+	default 4 if ARCH_LS1043A || ARCH_LS1046A || ARCH_B4860 || \
+			ARCH_B4420 || ARCH_P1010
+	default 8 if ARCH_LS2080A || ARCH_LS1088A || ARCH_LS1021A || \
+			ARCH_T4240 || ARCH_T1040 || ARCH_T1042 || \
+			ARCH_T1024 || ARCH_T2080 || ARCH_C29X
+
 config FSL_QIXIS
 	bool "Enable QIXIS support"
 	depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
@@ -251,3 +282,17 @@ config QIXIS_I2C_ACCESS
 config HAS_FSL_DR_USB
 	def_bool y
 	depends on USB_EHCI_HCD && PPC
+
+config SYS_DPAA_FMAN
+	bool
+
+config SYS_FSL_SRDS_1
+	bool
+
+config SYS_FSL_SRDS_2
+	bool
+
+config SYS_HAS_SERDES
+	bool
+
+endmenu

arch/arc/Kconfig

@@ -102,6 +102,13 @@ config ARC_MMU_V4
 
 endchoice
 
+config ARC_MMU_VER
+	int
+	default 0 if ARC_MMU_ABSENT
+	default 2 if ARC_MMU_V2
+	default 3 if ARC_MMU_V3
+	default 4 if ARC_MMU_V4
+
 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
 	help

arch/arc/config.mk

@@ -12,15 +12,8 @@ KBUILD_LDFLAGS += -EB
 PLATFORM_CPPFLAGS += -mbig-endian
 endif
 
-ifdef CONFIG_ARC_MMU_VER
-CONFIG_MMU = 1
-endif
-
 PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2 -mno-sdata
 PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections -fno-common
 
 # Needed for relocation
 LDFLAGS_FINAL += -pie --gc-sections
-
-# Load address for standalone apps
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x82000000

arch/arc/include/asm/cache.h

@@ -16,16 +16,6 @@
  */
 #define ARCH_DMA_MINALIGN	128
 
-#if defined(ARC_MMU_ABSENT)
-#define CONFIG_ARC_MMU_VER 0
-#elif defined(CONFIG_ARC_MMU_V2)
-#define CONFIG_ARC_MMU_VER 2
-#elif defined(CONFIG_ARC_MMU_V3)
-#define CONFIG_ARC_MMU_VER 3
-#elif defined(CONFIG_ARC_MMU_V4)
-#define CONFIG_ARC_MMU_VER 4
-#endif
-
 #ifndef __ASSEMBLY__
 
 void cache_init(void);

arch/arc/lib/bootm.c

@@ -29,7 +29,7 @@ static int boot_prep_linux(struct bootm_headers *images)
 {
 	int ret;
 
-	if (CONFIG_IS_ENABLED(LMB)) {
+	if (IS_ENABLED(CONFIG_LMB)) {
 		ret = image_setup_linux(images);
 		if (ret)
 			return ret;

arch/arc/lib/cache.c

@@ -476,9 +476,9 @@ static void __slc_rgn_op(unsigned long paddr, unsigned long sz, const int op)
 static void arc_ioc_setup(void)
 {
 	/* IOC Aperture start is equal to DDR start */
-	unsigned int ap_base = CONFIG_SYS_SDRAM_BASE;
+	unsigned int ap_base = CFG_SYS_SDRAM_BASE;
 	/* IOC Aperture size is equal to DDR size */
-	long ap_size = CONFIG_SYS_SDRAM_SIZE;
+	long ap_size = CFG_SYS_SDRAM_SIZE;
 
 	/* Unsupported configuration. See [ NOTE 2 ] for more details. */
 	if (!slc_exists())

arch/arc/lib/cpu.c

@@ -20,7 +20,7 @@ int arch_cpu_init(void)
 	timer_init();
 
 	gd->cpu_clk = get_board_sys_clk();
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+	gd->ram_size = CFG_SYS_SDRAM_SIZE;
 
 	cache_init();
 

arch/arc/lib/ints_low.S

@@ -76,13 +76,8 @@
 .endm
 
 .macro SAVE_EXCEPTION_SOURCE
-#ifdef CONFIG_MMU
-	/* If MMU exists exception faulting address is loaded in EFA reg */
-	lr	%r0, [%efa]
-#else
 	/* Otherwise in ERET (exception return) reg */
 	lr	%r0, [%eret]
-#endif
 .endm
 
 ENTRY(memory_error)

arch/arm/Kconfig

@@ -413,52 +413,6 @@ config ARM_SMCCC
 	  This should be enabled if U-Boot needs to communicate with system
 	  firmware (for example, PSCI) according to SMCCC.
 
-config SEMIHOSTING
-	bool "Support ARM semihosting"
-	help
-	  Semihosting is a method for a target to communicate with a host
-	  debugger. It uses special instructions which the debugger will trap
-	  on and interpret. This allows U-Boot to read/write files, print to
-	  the console, and execute arbitrary commands on the host system.
-
-	  Enabling this option will add support for reading and writing files
-	  on the host system. If you don't have a debugger attached then trying
-	  to do this will likely cause U-Boot to hang. Say 'n' if you are unsure.
-
-config SEMIHOSTING_FALLBACK
-	bool "Recover gracefully when semihosting fails"
-	depends on SEMIHOSTING && ARM64
-	default y
-	help
-	  Normally, if U-Boot makes a semihosting call and no debugger is
-	  attached, then it will panic due to a synchronous abort
-	  exception. This config adds an exception handler which will allow
-	  U-Boot to recover. Say 'y' if unsure.
-
-config SPL_SEMIHOSTING
-	bool "Support ARM semihosting in SPL"
-	depends on SPL
-	help
-	  Semihosting is a method for a target to communicate with a host
-	  debugger. It uses special instructions which the debugger will trap
-	  on and interpret. This allows U-Boot to read/write files, print to
-	  the console, and execute arbitrary commands on the host system.
-
-	  Enabling this option will add support for reading and writing files
-	  on the host system. If you don't have a debugger attached then trying
-	  to do this will likely cause U-Boot to hang. Say 'n' if you are unsure.
-
-config SPL_SEMIHOSTING_FALLBACK
-	bool "Recover gracefully when semihosting fails in SPL"
-	depends on SPL_SEMIHOSTING && ARM64
-	select ARMV8_SPL_EXCEPTION_VECTORS
-	default y
-	help
-	  Normally, if U-Boot makes a semihosting call and no debugger is
-	  attached, then it will panic due to a synchronous abort
-	  exception. This config adds an exception handler which will allow
-	  U-Boot to recover. Say 'y' if unsure.
-
 config SYS_THUMB_BUILD
 	bool "Build U-Boot using the Thumb instruction set"
 	depends on !ARM64
@@ -599,6 +553,9 @@ config ARM64_SUPPORT_AARCH32
 	help
 	  This ARM64 system supports AArch32 execution state.
 
+config IPROC
+	bool
+
 config S5P
 	def_bool y if ARCH_EXYNOS || ARCH_S5PC1XX
 
@@ -632,7 +589,6 @@ config ARCH_KIRKWOOD
 config ARCH_MVEBU
 	bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
 	select DM
-	select DM_ETH
 	select DM_SERIAL
 	select DM_SPI
 	select DM_SPI_FLASH
@@ -640,7 +596,7 @@ config ARCH_MVEBU
 	select SPL_DM_SPI if SPL
 	select SPL_DM_SPI_FLASH if SPL
 	select SPL_TIMER if SPL
-	select TIMER
+	select TIMER if !ARM64
 	select OF_CONTROL
 	select OF_SEPARATE
 	select SPI
@@ -705,6 +661,7 @@ config TARGET_BCMCYGNUS
 	bool "Support bcmcygnus"
 	select CPU_V7A
 	select GPIO_EXTRA_HEADER
+	select IPROC
 	imply BCM_SF2_ETH
 	imply BCM_SF2_ETH_GMAC
 	imply CMD_HASH
@@ -736,7 +693,6 @@ config ARCH_EXYNOS
 	select DM
 	select DM_GPIO
 	select DM_I2C
-	select DM_ETH
 	select DM_KEYBOARD
 	select DM_SERIAL
 	select DM_SPI
@@ -767,8 +723,9 @@ config ARCH_HIGHBANK
 	select CLK
 	select CLK_CCF
 	select AHCI
-	select DM_ETH
 	select PHYS_64BIT
+	select TIMER
+	select SP804_TIMER
 	imply OF_HAS_PRIOR_STAGE
 
 config ARCH_INTEGRATOR
@@ -821,7 +778,6 @@ config ARCH_OMAP2PLUS
 	select SUPPORT_SPL
 	imply TI_SYSC if DM && OF_CONTROL
 	imply FIT
-	imply DM_EVENT
 	imply SPL_SEPARATE_BSS
 
 config ARCH_MESON
@@ -866,11 +822,11 @@ config ARCH_IMX8
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
 	select DM
+	select DM_EVENT
 	select GPIO_EXTRA_HEADER
 	select MACH_IMX
 	select OF_CONTROL
 	select ENABLE_ARM_SOC_BOOT0_HOOK
-	imply DM_EVENT
 
 config ARCH_IMX8M
 	bool "NXP i.MX8M platform"
@@ -882,14 +838,15 @@ config ARCH_IMX8M
 	select SYS_FSL_SEC_LE
 	select SYS_I2C_MXC
 	select DM
+	select DM_EVENT if CLK
 	select SUPPORT_SPL
 	imply CMD_DM
-	imply DM_EVENT
 
 config ARCH_IMX8ULP
 	bool "NXP i.MX8ULP platform"
 	select ARM64
 	select DM
+	select DM_EVENT
 	select MACH_IMX
 	select OF_CONTROL
 	select SUPPORT_SPL
@@ -897,19 +854,18 @@ config ARCH_IMX8ULP
 	select MISC
 	select IMX_SENTINEL
 	imply CMD_DM
-	imply DM_EVENT
 
 config ARCH_IMX9
 	bool "NXP i.MX9 platform"
 	select ARM64
 	select DM
+	select DM_EVENT
 	select MACH_IMX
 	select SUPPORT_SPL
 	select GPIO_EXTRA_HEADER
 	select MISC
 	select IMX_SENTINEL
 	imply CMD_DM
-	imply DM_EVENT
 
 config ARCH_IMXRT
 	bool "NXP i.MXRT platform"
@@ -962,6 +918,7 @@ config ARCH_MX7
 	select CPU_V7A
 	select GPIO_EXTRA_HEADER
 	select MACH_IMX
+	select MXC_GPT_HCLK
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
@@ -975,6 +932,7 @@ config ARCH_MX6
 	select CPU_V7A
 	select GPIO_EXTRA_HEADER
 	select MACH_IMX
+	select MXC_GPT_HCLK
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
@@ -1007,6 +965,7 @@ config ARCH_APPLE
 	bool "Apple SoCs"
 	select ARM64
 	select CLK
+	select CMD_PCI
 	select CMD_USB
 	select DM
 	select DM_GPIO
@@ -1021,6 +980,7 @@ config ARCH_APPLE
 	select LINUX_KERNEL_IMAGE_HEADER
 	select OF_BOARD_SETUP
 	select OF_CONTROL
+	select PCI
 	select PINCTRL
 	select POSITION_INDEPENDENT
 	select POWER_DOMAIN
@@ -1039,7 +999,6 @@ config ARCH_APPLE
 config ARCH_OWL
 	bool "Actions Semi OWL SoCs"
 	select DM
-	select DM_ETH
 	select DM_SERIAL
 	select GPIO_EXTRA_HEADER
 	select OWL_SERIAL
@@ -1139,7 +1098,6 @@ config ARCH_SUNXI
 	select CMD_USB if DISTRO_DEFAULTS && USB_HOST
 	select CLK
 	select DM
-	select DM_ETH
 	select DM_GPIO
 	select DM_I2C if I2C
 	select DM_SPI if SPI
@@ -1218,7 +1176,6 @@ config ARCH_VERSAL
 	select ARM64
 	select CLK
 	select DM
-	select DM_ETH if NET
 	select DM_MMC if MMC
 	select DM_SERIAL
 	select GICV3
@@ -1228,11 +1185,10 @@ config ARCH_VERSAL
 	imply ENV_VARS_UBOOT_RUNTIME_CONFIG
 
 config ARCH_VERSAL_NET
-	bool "Support Xilinx Keystone Platform"
+	bool "Support Xilinx Versal NET Platform"
 	select ARM64
 	select CLK
 	select DM
-	select DM_ETH if NET
 	select DM_MMC if MMC
 	select DM_SERIAL
 	select OF_CONTROL
@@ -1243,6 +1199,7 @@ config ARCH_VF610
 	bool "Freescale Vybrid"
 	select CPU_V7A
 	select GPIO_EXTRA_HEADER
+	select IOMUX_SHARE_CONF_REG
 	select MACH_IMX
 	select SYS_FSL_ERRATUM_ESDHC111
 	imply CMD_MTDPARTS
@@ -1256,7 +1213,6 @@ config ARCH_ZYNQ
 	select CPU_V7A
 	select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
 	select DM
-	select DM_ETH if NET
 	select DM_MMC if MMC
 	select DM_SERIAL
 	select DM_SPI
@@ -1286,7 +1242,6 @@ config ARCH_ZYNQMP_R5
 	select CLK
 	select CPU_V7R
 	select DM
-	select DM_ETH if NET
 	select DM_MMC if MMC
 	select DM_SERIAL
 	select OF_CONTROL
@@ -1299,8 +1254,7 @@ config ARCH_ZYNQMP
 	select CLK
 	select DM
 	select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
-	select DM_ETH if NET
-	select DM_MAILBOX
+	imply DM_MAILBOX
 	select DM_MMC if MMC
 	select DM_SERIAL
 	select DM_SPI if SPI
@@ -1317,7 +1271,7 @@ config ARCH_ZYNQMP
 	imply SPL_FIRMWARE if SPL
 	select SPL_SEPARATE_BSS if SPL
 	select SUPPORT_SPL
-	select ZYNQMP_IPI
+	imply ZYNQMP_IPI if DM_MAILBOX
 	select SOC_DEVICE
 	imply BOARD_LATE_INIT
 	imply CMD_DM
@@ -1332,6 +1286,7 @@ config ARCH_TEGRA
 	select GPIO_EXTRA_HEADER
 	imply DISTRO_DEFAULTS
 	imply FAT_WRITE
+	imply SPL_TIMER if SPL
 
 config ARCH_VEXPRESS64
 	bool "Support ARMv8 Arm Ltd. VExpress based boards and models"
@@ -1650,6 +1605,7 @@ config TARGET_LS1021AQDS
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select LS1_DEEP_SLEEP
+	select PEN_ADDR_BIG_ENDIAN
 	select SUPPORT_SPL
 	select SYS_FSL_DDR
 	select FSL_DDR_INTERACTIVE
@@ -1668,6 +1624,7 @@ config TARGET_LS1021ATWR
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select LS1_DEEP_SLEEP
+	select PEN_ADDR_BIG_ENDIAN
 	select SUPPORT_SPL
 	select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
 	select GPIO_EXTRA_HEADER
@@ -1732,6 +1689,7 @@ config TARGET_LS1021AIOT
 	select CPU_V7A
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
+	select PEN_ADDR_BIG_ENDIAN
 	select SUPPORT_SPL
 	select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI
 	select GPIO_EXTRA_HEADER
@@ -1846,7 +1804,6 @@ config TARGET_SL28
 	select DM_I2C
 	select DM_MMC
 	select DM_SPI_FLASH
-	select DM_ETH
 	select DM_MDIO
 	select PCI
 	select DM_RNG
@@ -1883,7 +1840,6 @@ config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoCs"
 	select BOARD_LATE_INIT
 	select DM
-	select DM_ETH
 	select DM_GPIO
 	select DM_I2C
 	select DM_MMC
@@ -2069,7 +2025,6 @@ config TARGET_POMELO
 	select SCSI
 	select DM_SCSI
 	select DM_SERIAL
-	select DM_ETH if NET
 	imply CMD_PCI
 	help
 	   Support for pomelo platform.
@@ -2339,6 +2294,7 @@ source "board/hisilicon/poplar/Kconfig"
 source "board/isee/igep003x/Kconfig"
 source "board/kontron/sl28/Kconfig"
 source "board/myir/mys_6ulx/Kconfig"
+source "board/samsung/common/Kconfig"
 source "board/siemens/common/Kconfig"
 source "board/seeed/npi_imx6ull/Kconfig"
 source "board/socionext/developerbox/Kconfig"

arch/arm/config.mk

@@ -3,14 +3,6 @@
 # (C) Copyright 2000-2002
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
-ifndef CONFIG_STANDALONE_LOAD_ADDR
-ifneq ($(CONFIG_ARCH_OMAP2PLUS),)
-CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
-else
-CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
-endif
-endif
-
 CFLAGS_NON_EFI := -fno-pic -ffixed-r9 -ffunction-sections -fdata-sections \
 		  -fstack-protector-strong
 CFLAGS_EFI := -fpic -fshort-wchar

arch/arm/cpu/arm1176/start.S

@@ -17,10 +17,6 @@
 #include <config.h>
 #include <linux/linkage.h>
 
-#ifndef CONFIG_SYS_PHY_UBOOT_BASE
-#define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
-#endif
-
 /*
  *************************************************************************
  *
@@ -88,7 +84,7 @@ cpu_init_crit:
 
 	/* Prepare to disable the MMU */
 	adr	r2, mmu_disable_phys
-	sub	r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_TEXT_BASE)
+	sub	r2, r2, #(CFG_SYS_UBOOT_BASE - CONFIG_TEXT_BASE)
 	b	mmu_disable
 
 	.align 5

arch/arm/cpu/arm920t/Makefile

@@ -7,8 +7,6 @@ extra-y	= start.o
 
 obj-y	+= cpu.o
 
-obj-$(CONFIG_IMX) += imx/
-
 # some files can only build in ARM mode
 
 ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD

arch/arm/cpu/arm920t/imx/Makefile

@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	+= generic.o
-obj-y	+= speed.o
-obj-y	+= timer.o

arch/arm/cpu/arm920t/imx/generic.c

@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- */
-
-#include <common.h>
-
-#ifdef CONFIG_IMX
-
-#include <asm/arch/imx-regs.h>
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if( ocr == 3 )
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA1(port) &= ~( 3<<(pin*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB1(port) &= ~( 3<<(pin*2));
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB2(port) &= ~( 3<<((pin-16)*2));
-	}
-}
-
-#endif /* CONFIG_IMX */

arch/arm/cpu/arm920t/imx/speed.c

@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- */
-
-
-#include <common.h>
-#if defined (CONFIG_IMX)
-#include <clock_legacy.h>
-
-#include <asm/arch/imx-regs.h>
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * get_board_sys_clk() should be defined as the input frequency of the PLL.
- * SH FIXME: 16780000 in our case
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-ulong get_systemPLLCLK(void)
-{
-	/* FIXME: We assume System_SEL = 0 here */
-	u32 spctl0 = SPCTL0;
-	u32 mfi = (spctl0 >> 10) & 0xf;
-	u32 mfn = spctl0 & 0x3f;
-	u32 mfd = (spctl0 >> 16) & 0x3f;
-	u32 pd =  (spctl0 >> 26) & 0xf;
-
-	mfi = mfi<=5 ? 5 : mfi;
-
-	return (2*(CONFIG_SYSPLL_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
-}
-
-ulong get_mcuPLLCLK(void)
-{
-	/* FIXME: We assume System_SEL = 0 here */
-	u32 mpctl0 = MPCTL0;
-	u32 mfi = (mpctl0 >> 10) & 0xf;
-	u32 mfn = mpctl0 & 0x3f;
-	u32 mfd = (mpctl0 >> 16) & 0x3f;
-	u32 pd =  (mpctl0 >> 26) & 0xf;
-
-	mfi = mfi<=5 ? 5 : mfi;
-
-	return (2*(get_board_sys_clk()>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
-}
-
-ulong get_FCLK(void)
-{
-	return (( CSCR>>15)&1) ? get_mcuPLLCLK()>>1 : get_mcuPLLCLK();
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	u32 bclkdiv = (( CSCR >> 10 ) & 0xf) + 1;
-	printf("bclkdiv: %d\n", bclkdiv);
-	return get_systemPLLCLK() / bclkdiv;
-}
-
-/* return BCLK frequency */
-ulong get_BCLK(void)
-{
-	return get_HCLK();
-}
-
-ulong get_PERCLK1(void)
-{
-	return get_systemPLLCLK() / (((PCDR) & 0xf)+1);
-}
-
-ulong get_PERCLK2(void)
-{
-	return get_systemPLLCLK() / (((PCDR>>4) & 0xf)+1);
-}
-
-ulong get_PERCLK3(void)
-{
-	return get_systemPLLCLK() / (((PCDR>>16) & 0x7f)+1);
-}
-
-#endif /* defined (CONFIG_IMX) */

arch/arm/cpu/arm920t/imx/timer.c

@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <time.h>
-#if defined (CONFIG_IMX)
-
-#include <asm/arch/imx-regs.h>
-#include <linux/delay.h>
-
-int timer_init (void)
-{
-	int i;
-	/* setup GP Timer 1 */
-	TCTL1 = TCTL_SWR;
-	for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
-	TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
-	TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
-
-	/* Reset the timer */
-	TCTL1 &= ~TCTL_TEN;
-	TCTL1 |= TCTL_TEN; /* Enable timer */
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-static ulong get_timer_masked (void)
-{
-	return TCN1;
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void __udelay(unsigned long usec)
-{
-	ulong endtime = get_timer_masked() + usec;
-	signed long diff;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
-
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu(void)
-{
-	/* Disable watchdog and set Time-Out field to 0 */
-	WCR = 0x00000000;
-
-	/* Write Service Sequence */
-	WSR = 0x00005555;
-	WSR = 0x0000AAAA;
-
-	/* Enable watchdog */
-	WCR = 0x00000001;
-
-	while (1);
-	/*NOTREACHED*/
-}
-
-#endif /* defined (CONFIG_IMX) */

arch/arm/cpu/arm926ejs/Makefile

@@ -12,7 +12,6 @@ extra-y	:=
 endif
 endif
 
-obj-$(CONFIG_MX27) += mx27/
 obj-$(if $(filter mxs,$(SOC)),y) += mxs/
 obj-$(if $(filter spear,$(SOC)),y) += spear/
 obj-$(CONFIG_ARCH_SUNXI) += sunxi/

arch/arm/cpu/arm926ejs/mx27/Makefile

@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-
-obj-y	+= generic.o timer.o reset.o relocate.o

arch/arm/cpu/arm926ejs/mx27/generic.c

@@ -1,378 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *  Copyright (c) 2008 Eric Jarrige <eric.jarrige@armadeus.org>
- *  Copyright (c) 2009 Ilya Yanok <yanok@emcraft.com>
- */
-
-#include <common.h>
-#include <div64.h>
-#include <net.h>
-#include <netdev.h>
-#include <vsprintf.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/mach-imx/sys_proto.h>
-#ifdef CONFIG_MMC_MXC
-#include <asm/arch/mxcmmc.h>
-#endif
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref)
-{
-	unsigned int mfi = (pll >> 10) & 0xf;
-	unsigned int mfn = pll & 0x3ff;
-	unsigned int mfd = (pll >> 16) & 0x3ff;
-	unsigned int pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	return lldiv(2 * (u64)f_ref * (mfi * (mfd + 1) + mfn),
-			(mfd + 1) * (pd + 1));
-}
-
-static ulong clk_in_32k(void)
-{
-	return 1024 * CONFIG_MX27_CLK32;
-}
-
-static ulong clk_in_26m(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	if (readl(&pll->cscr) & CSCR_OSC26M_DIV1P5) {
-		/* divide by 1.5 */
-		return 26000000 * 2 / 3;
-	} else {
-		return 26000000;
-	}
-}
-
-static ulong imx_get_mpllclk(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-	ulong cscr = readl(&pll->cscr);
-	ulong fref;
-
-	if (cscr & CSCR_MCU_SEL)
-		fref = clk_in_26m();
-	else
-		fref = clk_in_32k();
-
-	return imx_decode_pll(readl(&pll->mpctl0), fref);
-}
-
-static ulong imx_get_armclk(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-	ulong cscr = readl(&pll->cscr);
-	ulong fref = imx_get_mpllclk();
-	ulong div;
-
-	if (!(cscr & CSCR_ARM_SRC_MPLL))
-		fref = lldiv((fref * 2), 3);
-
-	div = ((cscr >> 12) & 0x3) + 1;
-
-	return lldiv(fref, div);
-}
-
-static ulong imx_get_ahbclk(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-	ulong cscr = readl(&pll->cscr);
-	ulong fref = imx_get_mpllclk();
-	ulong div;
-
-	div = ((cscr >> 8) & 0x3) + 1;
-
-	return lldiv(fref * 2, 3 * div);
-}
-
-static __attribute__((unused)) ulong imx_get_spllclk(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-	ulong cscr = readl(&pll->cscr);
-	ulong fref;
-
-	if (cscr & CSCR_SP_SEL)
-		fref = clk_in_26m();
-	else
-		fref = clk_in_32k();
-
-	return imx_decode_pll(readl(&pll->spctl0), fref);
-}
-
-static ulong imx_decode_perclk(ulong div)
-{
-	return lldiv((imx_get_mpllclk() * 2), (div * 3));
-}
-
-static ulong imx_get_perclk1(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	return imx_decode_perclk((readl(&pll->pcdr1) & 0x3f) + 1);
-}
-
-static ulong imx_get_perclk2(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	return imx_decode_perclk(((readl(&pll->pcdr1) >> 8) & 0x3f) + 1);
-}
-
-static __attribute__((unused)) ulong imx_get_perclk3(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	return imx_decode_perclk(((readl(&pll->pcdr1) >> 16) & 0x3f) + 1);
-}
-
-static __attribute__((unused)) ulong imx_get_perclk4(void)
-{
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	return imx_decode_perclk(((readl(&pll->pcdr1) >> 24) & 0x3f) + 1);
-}
-
-unsigned int mxc_get_clock(enum mxc_clock clk)
-{
-	switch (clk) {
-	case MXC_ARM_CLK:
-		return imx_get_armclk();
-	case MXC_I2C_CLK:
-		return imx_get_ahbclk()/2;
-	case MXC_UART_CLK:
-		return imx_get_perclk1();
-	case MXC_FEC_CLK:
-		return imx_get_ahbclk();
-	case MXC_ESDHC_CLK:
-		return imx_get_perclk2();
-	}
-	return -1;
-}
-
-
-u32 get_cpu_rev(void)
-{
-	return MXC_CPU_MX27 << 12;
-}
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo (void)
-{
-	char buf[32];
-
-	printf("CPU:   Freescale i.MX27 at %s MHz\n\n",
-			strmhz(buf, imx_get_mpllclk()));
-	return 0;
-}
-#endif
-
-int cpu_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_FEC_MXC)
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	/* enable FEC clock */
-	writel(readl(&pll->pccr1) | PCCR1_HCLK_FEC, &pll->pccr1);
-	writel(readl(&pll->pccr0) | PCCR0_FEC_EN, &pll->pccr0);
-	return fecmxc_initialize(bis);
-#else
-	return 0;
-#endif
-}
-
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(struct bd_info *bis)
-{
-#ifdef CONFIG_MMC_MXC
-	return mxc_mmc_init(bis);
-#else
-	return 0;
-#endif
-}
-
-void imx_gpio_mode(int gpio_mode)
-{
-	struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE;
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int aout = (gpio_mode & GPIO_AOUT_MASK) >> GPIO_AOUT_SHIFT;
-	unsigned int bout = (gpio_mode & GPIO_BOUT_MASK) >> GPIO_BOUT_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if (gpio_mode & GPIO_PUEN) {
-		writel(readl(&regs->port[port].puen) | (1 << pin),
-				&regs->port[port].puen);
-	} else {
-		writel(readl(&regs->port[port].puen) & ~(1 << pin),
-				&regs->port[port].puen);
-	}
-
-	/* Data direction */
-	if (gpio_mode & GPIO_OUT) {
-		writel(readl(&regs->port[port].gpio_dir) | 1 << pin,
-				&regs->port[port].gpio_dir);
-	} else {
-		writel(readl(&regs->port[port].gpio_dir) & ~(1 << pin),
-				&regs->port[port].gpio_dir);
-	}
-
-	/* Primary / alternate function */
-	if (gpio_mode & GPIO_AF) {
-		writel(readl(&regs->port[port].gpr) | (1 << pin),
-				&regs->port[port].gpr);
-	} else {
-		writel(readl(&regs->port[port].gpr) & ~(1 << pin),
-				&regs->port[port].gpr);
-	}
-
-	/* use as gpio? */
-	if (!(gpio_mode & (GPIO_PF | GPIO_AF))) {
-		writel(readl(&regs->port[port].gius) | (1 << pin),
-				&regs->port[port].gius);
-	} else {
-		writel(readl(&regs->port[port].gius) & ~(1 << pin),
-				&regs->port[port].gius);
-	}
-
-	/* Output / input configuration */
-	if (pin < 16) {
-		tmp = readl(&regs->port[port].ocr1);
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		writel(tmp, &regs->port[port].ocr1);
-
-		writel(readl(&regs->port[port].iconfa1) & ~(3 << (pin * 2)),
-				&regs->port[port].iconfa1);
-		writel(readl(&regs->port[port].iconfa1) | aout << (pin * 2),
-				&regs->port[port].iconfa1);
-		writel(readl(&regs->port[port].iconfb1) & ~(3 << (pin * 2)),
-				&regs->port[port].iconfb1);
-		writel(readl(&regs->port[port].iconfb1) | bout << (pin * 2),
-				&regs->port[port].iconfb1);
-	} else {
-		pin -= 16;
-
-		tmp = readl(&regs->port[port].ocr2);
-		tmp &= ~(3 << (pin * 2));
-		tmp |= (ocr << (pin * 2));
-		writel(tmp, &regs->port[port].ocr2);
-
-		writel(readl(&regs->port[port].iconfa2) & ~(3 << (pin * 2)),
-				&regs->port[port].iconfa2);
-		writel(readl(&regs->port[port].iconfa2) | aout << (pin * 2),
-				&regs->port[port].iconfa2);
-		writel(readl(&regs->port[port].iconfb2) & ~(3 << (pin * 2)),
-				&regs->port[port].iconfb2);
-		writel(readl(&regs->port[port].iconfb2) | bout << (pin * 2),
-				&regs->port[port].iconfb2);
-	}
-}
-
-#ifdef CONFIG_MXC_UART
-void mx27_uart1_init_pins(void)
-{
-	int i;
-	unsigned int mode[] = {
-		PE12_PF_UART1_TXD,
-		PE13_PF_UART1_RXD,
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mode); i++)
-		imx_gpio_mode(mode[i]);
-
-}
-#endif /* CONFIG_MXC_UART */
-
-#ifdef CONFIG_FEC_MXC
-void mx27_fec_init_pins(void)
-{
-	int i;
-	unsigned int mode[] = {
-		PD0_AIN_FEC_TXD0,
-		PD1_AIN_FEC_TXD1,
-		PD2_AIN_FEC_TXD2,
-		PD3_AIN_FEC_TXD3,
-		PD4_AOUT_FEC_RX_ER,
-		PD5_AOUT_FEC_RXD1,
-		PD6_AOUT_FEC_RXD2,
-		PD7_AOUT_FEC_RXD3,
-		PD8_AF_FEC_MDIO,
-		PD9_AIN_FEC_MDC | GPIO_PUEN,
-		PD10_AOUT_FEC_CRS,
-		PD11_AOUT_FEC_TX_CLK,
-		PD12_AOUT_FEC_RXD0,
-		PD13_AOUT_FEC_RX_DV,
-		PD14_AOUT_FEC_CLR,
-		PD15_AOUT_FEC_COL,
-		PD16_AIN_FEC_TX_ER,
-		PF23_AIN_FEC_TX_EN,
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mode); i++)
-		imx_gpio_mode(mode[i]);
-}
-
-void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
-{
-	int i;
-	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
-	struct fuse_bank *bank = &iim->bank[0];
-	struct fuse_bank0_regs *fuse =
-			(struct fuse_bank0_regs *)bank->fuse_regs;
-
-	for (i = 0; i < 6; i++)
-		mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff;
-}
-#endif /* CONFIG_FEC_MXC */
-
-#ifdef CONFIG_MMC_MXC
-void mx27_sd1_init_pins(void)
-{
-	int i;
-	unsigned int mode[] = {
-		PE18_PF_SD1_D0,
-		PE19_PF_SD1_D1,
-		PE20_PF_SD1_D2,
-		PE21_PF_SD1_D3,
-		PE22_PF_SD1_CMD,
-		PE23_PF_SD1_CLK,
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mode); i++)
-		imx_gpio_mode(mode[i]);
-
-}
-
-void mx27_sd2_init_pins(void)
-{
-	int i;
-	unsigned int mode[] = {
-		PB4_PF_SD2_D0,
-		PB5_PF_SD2_D1,
-		PB6_PF_SD2_D2,
-		PB7_PF_SD2_D3,
-		PB8_PF_SD2_CMD,
-		PB9_PF_SD2_CLK,
-	};
-
-	for (i = 0; i < ARRAY_SIZE(mode); i++)
-		imx_gpio_mode(mode[i]);
-
-}
-#endif /* CONFIG_MMC_MXC */

arch/arm/cpu/arm926ejs/mx27/relocate.S

@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *  relocate - i.MX27-specific vector relocation
- *
- *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <linux/linkage.h>
-
-/*
- * The i.MX27 SoC is very specific with respect to exceptions: it
- * does not provide RAM at the high vectors address (0xFFFF0000),
- * thus only the low address (0x00000000) is useable; but that is
- * in ROM. Therefore, vectors cannot be changed at all.
- *
- * However, these ROM-based vectors actually just perform indirect
- * calls through pointers located in RAM at SoC-specific addresses,
- * as follows:
- *
- * Offset      Exception              Use by ROM code
- * 0x00000000  reset                  indirect branch to [0x00000014]
- * 0x00000004  undefined instruction  indirect branch to [0xfffffef0]
- * 0x00000008  software interrupt     indirect branch to [0xfffffef4]
- * 0x0000000c  prefetch abort         indirect branch to [0xfffffef8]
- * 0x00000010  data abort             indirect branch to [0xfffffefc]
- * 0x00000014  (reserved in ARMv5)    vector to ROM reset: 0xc0000000
- * 0x00000018  IRQ                    indirect branch to [0xffffff00]
- * 0x0000001c  FIQ                    indirect branch to [0xffffff04]
- *
- * In order to initialize exceptions on i.MX27, we must copy U-Boot's
- * indirect (not exception!) vector table into 0xfffffef0..0xffffff04
- * taking care not to copy vectors number 5 (reserved exception).
- */
-
-	.section	.text.relocate_vectors,"ax",%progbits
-
-ENTRY(relocate_vectors)
-
-	ldr	r0, [r9, #GD_RELOCADDR]	/* r0 = gd->relocaddr */
-	ldr	r1, =32			/* size of vector table */
-	add	r0, r0, r1		/* skip to indirect table */
-	ldr	r1, =0xFFFFFEF0		/* i.MX27 indirect table */
-	ldmia	r0!, {r2-r8}		/* load indirect vectors 1..7 */
-	stmia	r1!, {r2-r5, r7,r8}	/* write all but vector 5 */
-
-	bx	lr
-
-ENDPROC(relocate_vectors)

arch/arm/cpu/arm926ejs/mx27/reset.c

@@ -1,41 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * (C) Copyright 2009
- * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-
-/*
- * Reset the cpu by setting up the watchdog timer and let it time out
- */
-void reset_cpu(void)
-{
-	struct wdog_regs *regs = (struct wdog_regs *)IMX_WDT_BASE;
-	/* Disable watchdog and set Time-Out field to 0 */
-	writew(0x0000, &regs->wcr);
-
-	/* Write Service Sequence */
-	writew(0x5555, &regs->wsr);
-	writew(0xAAAA, &regs->wsr);
-
-	/* Enable watchdog */
-	writew(WCR_WDE, &regs->wcr);
-
-	while (1);
-	/*NOTREACHED*/
-}

arch/arm/cpu/arm926ejs/mx27/timer.c

@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * (C) Copyright 2009
- * Ilya Yanok, Emcraft Systems Ltd, <yanok@emcraft.com>
- */
-
-#include <common.h>
-#include <div64.h>
-#include <init.h>
-#include <time.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/ptrace.h>
-#include <linux/delay.h>
-
-/* General purpose timers bitfields */
-#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
-#define GPTCR_FRR		(1 << 8)	/* Freerun / restart	*/
-#define GPTCR_CLKSOURCE_32	(4 << 1)	/* Clock source		*/
-#define GPTCR_TEN		1		/* Timer enable		*/
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define timestamp	(gd->arch.tbl)
-#define lastinc		(gd->arch.lastinc)
-
-/*
- * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
- * "tick" is internal timer period
- */
-#ifdef CONFIG_MX27_TIMER_HIGH_PRECISION
-/* ~0.4% error - measured with stop-watch on 100s boot-delay */
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	tick *= CONFIG_SYS_HZ;
-	do_div(tick, CONFIG_MX27_CLK32);
-	return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
-	time *= CONFIG_MX27_CLK32;
-	do_div(time, CONFIG_SYS_HZ);
-	return time;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
-	us = us * CONFIG_MX27_CLK32 + 999999;
-	do_div(us, 1000000);
-	return us;
-}
-#else
-/* ~2% error */
-#define TICK_PER_TIME	((CONFIG_MX27_CLK32 + CONFIG_SYS_HZ / 2) / \
-		CONFIG_SYS_HZ)
-#define US_PER_TICK	(1000000 / CONFIG_MX27_CLK32)
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	do_div(tick, TICK_PER_TIME);
-	return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
-	return time * TICK_PER_TIME;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
-	us += US_PER_TICK - 1;
-	do_div(us, US_PER_TICK);
-	return us;
-}
-#endif
-
-/* nothing really to do with interrupts, just starts up a counter. */
-/* The 32768Hz 32-bit timer overruns in 131072 seconds */
-int timer_init(void)
-{
-	int i;
-	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
-	struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE;
-
-	/* setup GP Timer 1 */
-	writel(GPTCR_SWR, &regs->gpt_tctl);
-
-	writel(readl(&pll->pccr0) | PCCR0_GPT1_EN, &pll->pccr0);
-	writel(readl(&pll->pccr1) | PCCR1_PERCLK1_EN, &pll->pccr1);
-
-	for (i = 0; i < 100; i++)
-		writel(0, &regs->gpt_tctl); /* We have no udelay by now */
-	writel(0, &regs->gpt_tprer); /* 32Khz */
-	/* Freerun Mode, PERCLK1 input */
-	writel(readl(&regs->gpt_tctl) | GPTCR_CLKSOURCE_32 | GPTCR_FRR,
-			&regs->gpt_tctl);
-	writel(readl(&regs->gpt_tctl) | GPTCR_TEN, &regs->gpt_tctl);
-
-	return 0;
-}
-
-unsigned long long get_ticks(void)
-{
-	struct gpt_regs *regs = (struct gpt_regs *)IMX_TIM1_BASE;
-	ulong now = readl(&regs->gpt_tcn); /* current tick value */
-
-	if (now >= lastinc) {
-		/*
-		 * normal mode (non roll)
-		 * move stamp forward with absolut diff ticks
-		 */
-		timestamp += (now - lastinc);
-	} else {
-		/* we have rollover of incrementer */
-		timestamp += (0xFFFFFFFF - lastinc) + now;
-	}
-	lastinc = now;
-	return timestamp;
-}
-
-static ulong get_timer_masked(void)
-{
-	/*
-	 * get_ticks() returns a long long (64 bit), it wraps in
-	 * 2^64 / CONFIG_MX27_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
-	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
-	 * 5 * 10^6 days - long enough.
-	 */
-	return tick_to_time(get_ticks());
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-/* delay x useconds AND preserve advance timstamp value */
-void __udelay(unsigned long usec)
-{
-	unsigned long long tmp;
-	ulong tmo;
-
-	tmo = us_to_tick(usec);
-	tmp = get_ticks() + tmo;	/* get current timestamp */
-
-	while (get_ticks() < tmp)	/* loop till event */
-		 /*NOP*/;
-}
-
-ulong get_tbclk(void)
-{
-	return CONFIG_MX27_CLK32;
-}

arch/arm/cpu/arm926ejs/start.S

@@ -95,7 +95,7 @@ flush_dcache:
 	mrc	p15, 0, r0, c1, c0, 0
 	bic	r0, r0, #0x00000300	/* clear bits 9:8 (---- --RS) */
 	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
-#ifdef CONFIG_SYS_EXCEPTION_VECTORS_HIGH
+#ifdef CFG_SYS_EXCEPTION_VECTORS_HIGH
 	orr	r0, r0, #0x00002000	/* set bit 13 (--V- ----) */
 #else
 	bic	r0, r0, #0x00002000	/* clear bit 13 (--V- ----) */

arch/arm/cpu/armv7/Makefile

@@ -26,7 +26,6 @@ obj-$(CONFIG_ARMV7_NONSEC)	+= nonsec_virt.o virt-v7.o virt-dt.o
 obj-$(CONFIG_ARMV7_PSCI)	+= psci.o psci-common.o
 
 obj-$(CONFIG_IPROC) += iproc-common/
-obj-$(CONFIG_KONA) += kona-common/
 obj-$(CONFIG_SYS_ARCH_TIMER) += arch_timer.o
 
 ifneq (,$(filter s5pc1xx exynos,$(SOC)))
@@ -38,7 +37,6 @@ obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/
 obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/
 obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/
 obj-$(if $(filter ls102xa,$(SOC)),y) += ls102xa/
-obj-$(CONFIG_RMOBILE) += rmobile/
 obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
 obj-$(CONFIG_ARCH_SUNXI) += sunxi/
 obj-$(CONFIG_VF610) += vf610/

arch/arm/cpu/armv7/arch_timer.c

@@ -14,7 +14,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CONFIG_SYS_HZ_CLOCK
+#ifndef CFG_SYS_HZ_CLOCK
 static inline u32 read_cntfrq(void)
 {
 	u32 frq;
@@ -29,8 +29,8 @@ int timer_init(void)
 	gd->arch.tbl = 0;
 	gd->arch.tbu = 0;
 
-#ifdef CONFIG_SYS_HZ_CLOCK
-	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK;
+#ifdef CFG_SYS_HZ_CLOCK
+	gd->arch.timer_rate_hz = CFG_SYS_HZ_CLOCK;
 #else
 	gd->arch.timer_rate_hz = read_cntfrq();
 #endif

arch/arm/cpu/armv7/kona-common/Makefile

@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Broadcom Corporation.
-
-obj-y	+= s_init.o
-obj-y	+= hwinit-common.o
-obj-y	+= clk-stubs.o
-obj-${CONFIG_KONA_RESET_S} += reset.o

arch/arm/cpu/armv7/kona-common/clk-stubs.c

@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-
-/*
- * These weak functions are available to kona architectures that don't
- * require clock enables from the driver code.
- */
-int __weak clk_sdio_enable(void *base, u32 rate, u32 *actual_ratep)
-{
-	return 0;
-}
-
-int __weak clk_bsc_enable(void *base)
-{
-	return 0;
-}
-
-int __weak clk_usb_otg_enable(void *base)
-{
-	return 0;
-}

arch/arm/cpu/armv7/kona-common/hwinit-common.c

@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <asm/cache.h>
-#include <linux/sizes.h>
-
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-void enable_caches(void)
-{
-	/* Enable D-cache. I-cache is already enabled in start.S */
-	dcache_enable();
-}
-#endif

arch/arm/cpu/armv7/kona-common/reset.S

@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Broadcom Corporation.
- */
-
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, =0x35001f00
-	ldr	r2, [r1]
-	ldr	r4, =0x80000000
-	and	r4, r2, r4
-	ldr	r3, =0xA5A500
-	orr	r4, r4, r3
-	orr	r4, r4, #0x1
-
-	str	r4, [r1]
-
-	ldr	r1, =0x35001f04
-	ldr	r2, [r1]
-	ldr	r4, =0x80000000
-	and	r4, r2, r4
-	str	r4, [r1]
-
-_loop_forever:
-	b	_loop_forever

arch/arm/cpu/armv7/kona-common/s_init.c

@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Broadcom Corporation.
- */
-
-/*
- * Early system init. Currently empty.
- */
-void s_init(void)
-{
-}

arch/arm/cpu/armv7/ls102xa/Kconfig

@@ -1,6 +1,8 @@
 config ARCH_LS1021A
 	bool
+	select FSL_DEVICE_DISABLE
 	select FSL_IFC if !QSPI_BOOT && !SD_BOOT_QSPI
+	select LS102XA_STREAM_ID
 	select SYS_FSL_DDR_BE if SYS_FSL_DDR
 	select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
 	select SYS_FSL_IFC_BE
@@ -30,9 +32,15 @@ config ARCH_LS1021A
 menu "LS102xA architecture"
 	depends on ARCH_LS1021A
 
+config FSL_DEVICE_DISABLE
+	bool
+
 config LS1_DEEP_SLEEP
 	bool "Deep sleep"
 
+config LS102XA_STREAM_ID
+	bool
+
 config MAX_CPUS
 	int "Maximum number of CPUs permitted for LS102xA"
 	default 2
@@ -43,6 +51,9 @@ config MAX_CPUS
 	  cores, count the reserved ports. This will allocate enough memory
 	  in spin table to properly handle all cores.
 
+config PEN_ADDR_BIG_ENDIAN
+	bool
+
 config SYS_CCI400_OFFSET
 	hex "Offset for CCI400 base"
 	depends on SYS_FSL_HAS_CCI400
@@ -82,20 +93,16 @@ config SYS_FSL_ERRATUM_A010315
 config SYS_FSL_HAS_CCI400
 	bool
 
-config SYS_FSL_SRDS_1
-	bool
-
-config SYS_FSL_SRDS_2
-	bool
-
-config SYS_HAS_SERDES
-	bool
-
-config SYS_FSL_IFC_BANK_COUNT
-	int "Maximum banks of Integrated flash controller"
-	default 8
-
 config SYS_FSL_ERRATUM_A008407
 	bool
 
+config SYS_FSL_QSPI_SKIP_CLKSEL
+	bool "Skip setting QSPI clock during SoC init"
+	default 0
+	help
+	   To improve startup times when booting from QSPI flash, the QSPI
+	   frequency can be set very early in the boot process. If this option
+	   is enabled, the QSPI frequency will not be changed by U-Boot during
+	   SoC initialization.
+
 endmenu

arch/arm/cpu/armv7/ls102xa/clock.c

@@ -15,8 +15,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info(struct sys_info *sys_info)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_LS1_CLK_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_clk *clk = (void *)(CFG_SYS_FSL_LS1_CLK_ADDR);
 	unsigned int cpu;
 	const u8 core_cplx_pll[6] = {
 		[0] = 0,	/* CC1 PPL / 1 */

arch/arm/cpu/armv7/ls102xa/cpu.c

@@ -168,18 +168,18 @@ static void mmu_setup(void)
 	/* Level 1 has 512 entries */
 	for (i = 0; i < 512; i++) {
 		/* Mapping for PCIe 1 */
-		if (va_start >= CONFIG_SYS_PCIE1_VIRT_ADDR &&
-		    va_start < (CONFIG_SYS_PCIE1_VIRT_ADDR +
-				 CONFIG_SYS_PCIE_MMAP_SIZE))
+		if (va_start >= CFG_SYS_PCIE1_VIRT_ADDR &&
+		    va_start < (CFG_SYS_PCIE1_VIRT_ADDR +
+				 CFG_SYS_PCIE_MMAP_SIZE))
 			set_pgsection(level1_table, i,
-				      CONFIG_SYS_PCIE1_PHYS_BASE + va_start,
+				      CFG_SYS_PCIE1_PHYS_BASE + va_start,
 				      MT_DEVICE_MEM);
 		/* Mapping for PCIe 2 */
-		else if (va_start >= CONFIG_SYS_PCIE2_VIRT_ADDR &&
-			 va_start < (CONFIG_SYS_PCIE2_VIRT_ADDR +
-				     CONFIG_SYS_PCIE_MMAP_SIZE))
+		else if (va_start >= CFG_SYS_PCIE2_VIRT_ADDR &&
+			 va_start < (CFG_SYS_PCIE2_VIRT_ADDR +
+				     CFG_SYS_PCIE_MMAP_SIZE))
 			set_pgsection(level1_table, i,
-				      CONFIG_SYS_PCIE2_PHYS_BASE + va_start,
+				      CFG_SYS_PCIE2_PHYS_BASE + va_start,
 				      MT_DEVICE_MEM);
 		else
 			set_pgsection(level1_table, i,
@@ -228,7 +228,7 @@ void enable_caches(void)
 
 uint get_svr(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 
 	return in_be32(&gur->svr);
 }
@@ -237,7 +237,7 @@ uint get_svr(void)
 int print_cpuinfo(void)
 {
 	char buf1[32], buf2[32];
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int svr, major, minor, ver, i;
 
 	svr = in_be32(&gur->svr);
@@ -302,21 +302,12 @@ int cpu_mmc_init(struct bd_info *bis)
 }
 #endif
 
-int cpu_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH)
-	tsec_standard_init(bis);
-#endif
-
-	return 0;
-}
-
 int arch_cpu_init(void)
 {
-	void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+	void *epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
 	void *rcpm2_base =
-		(void *)(CONFIG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET);
-	struct ccsr_scfg *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+		(void *)(CFG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET);
+	struct ccsr_scfg *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
 	u32 state;
 
 	icache_enable();
@@ -355,7 +346,7 @@ int arch_cpu_init(void)
 /* Set the address at which the secondary core starts from.*/
 void smp_set_core_boot_addr(unsigned long addr, int corenr)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 
 	out_be32(&gur->scratchrw[0], addr);
 }
@@ -363,7 +354,7 @@ void smp_set_core_boot_addr(unsigned long addr, int corenr)
 /* Release the secondary core from holdoff state and kick it */
 void smp_kick_all_cpus(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 
 	out_be32(&gur->brrl, 0x2);
 

arch/arm/cpu/armv7/ls102xa/fdt.c

@@ -92,7 +92,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 	int off;
 	int val;
 	const char *sysclk_path;
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int svr;
 	svr = in_be32(&gur->svr);
 
@@ -105,7 +105,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 	else {
 		ccsr_sec_t __iomem *sec;
 
-		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+		sec = (void __iomem *)CFG_SYS_FSL_SEC_ADDR;
 		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
 	}
 #endif
@@ -125,7 +125,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 
 #ifdef CONFIG_SYS_NS16550
 	do_fixup_by_compat_u32(blob, "fsl,16550-FIFO64",
-			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+			       "clock-frequency", CFG_SYS_NS16550_CLK, 1);
 #endif
 
 	sysclk_path = fdt_get_alias(blob, "sysclk");
@@ -183,7 +183,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 	off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT,
-					    CONFIG_SYS_IFC_ADDR);
+					    CFG_SYS_IFC_ADDR);
 	fdt_set_node_status(blob, off, FDT_STATUS_DISABLED);
 #else
 	off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT,

arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c

@@ -39,7 +39,7 @@ int is_serdes_configured(enum srds_prtcl device)
 
 int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 cfg = in_be32(&gur->rcwsr[4]);
 	int i;
 
@@ -74,7 +74,7 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 
 u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u64 serdes_prtcl_map = 0;
 	u32 cfg;
 	int lane;
@@ -103,14 +103,14 @@ void fsl_serdes_init(void)
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	if (!(serdes1_prtcl_map & (1ULL << NONE)))
 		serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
-					CONFIG_SYS_FSL_SERDES_ADDR,
+					CFG_SYS_FSL_SERDES_ADDR,
 					RCWSR4_SRDS1_PRTCL_MASK,
 					RCWSR4_SRDS1_PRTCL_SHIFT);
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	if (!(serdes2_prtcl_map & (1ULL << NONE)))
 		serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
-					CONFIG_SYS_FSL_SERDES_ADDR +
+					CFG_SYS_FSL_SERDES_ADDR +
 					FSL_SRDS_2 * 0x1000,
 					RCWSR4_SRDS2_PRTCL_MASK,
 					RCWSR4_SRDS2_PRTCL_SHIFT);

arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c

@@ -29,9 +29,9 @@
  */
 static void __secure ls1_save_ddr_head(void)
 {
-	const char *src = (const char *)CONFIG_SYS_SDRAM_BASE;
+	const char *src = (const char *)CFG_SYS_SDRAM_BASE;
 	char *dest = (char *)(OCRAM_BASE_S_ADDR + OCRAM_S_SIZE - DDR_RESV_LEN);
-	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
 	int i;
 
 	out_le32(&scfg->sparecr[2], dest);
@@ -42,7 +42,7 @@ static void __secure ls1_save_ddr_head(void)
 
 static void __secure ls1_fsm_setup(void)
 {
-	void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+	void *dcsr_epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
 	void *dcsr_rcpm_base = (void *)SYS_FSL_DCSR_RCPM_ADDR;
 
 	out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001);
@@ -57,8 +57,8 @@ static void __secure ls1_fsm_setup(void)
 
 static void __secure ls1_deepsleep_irq_cfg(void)
 {
-	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
-	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_rcpm __iomem *rcpm = (void *)CFG_SYS_FSL_RCPM_ADDR;
 	u32 ippdexpcr0, ippdexpcr1, pmcintecr = 0;
 
 	/* Mask interrupts from GIC */
@@ -118,10 +118,10 @@ static void __secure ls1_delay(unsigned int loop)
 
 static void __secure ls1_start_fsm(void)
 {
-	void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+	void *dcsr_epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
 	void *ccsr_gic_base = (void *)SYS_FSL_GIC_ADDR;
-	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
-	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 
 	/* Set HRSTCR */
 	setbits_be32(&scfg->hrstcr, 0x80000000);
@@ -155,9 +155,9 @@ static void __secure ls1_start_fsm(void)
 
 static void __secure ls1_deep_sleep(u32 entry_point)
 {
-	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
-	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
-	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
+	struct ccsr_rcpm __iomem *rcpm = (void *)CFG_SYS_FSL_RCPM_ADDR;
 #ifdef QIXIS_BASE
 	u32 tmp;
 	void *qixis_base = (void *)QIXIS_BASE;
@@ -213,8 +213,8 @@ static void __secure ls1_deep_sleep(u32 entry_point)
 #else
 static void __secure ls1_sleep(void)
 {
-	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
-	struct ccsr_rcpm __iomem *rcpm = (void *)CONFIG_SYS_FSL_RCPM_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_rcpm __iomem *rcpm = (void *)CFG_SYS_FSL_RCPM_ADDR;
 
 #ifdef QIXIS_BASE
 	u32 tmp;

arch/arm/cpu/armv7/ls102xa/psci.S

@@ -129,8 +129,8 @@ psci_cpu_on:
 	mov	r1, r4
 
 	@ Get DCFG base address
-	movw	r4, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff)
-	movt	r4, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16)
+	movw	r4, #(CFG_SYS_FSL_GUTS_ADDR & 0xffff)
+	movt	r4, #(CFG_SYS_FSL_GUTS_ADDR >> 16)
 
 	@ Detect target CPU state
 	ldr	r2, [r4, #DCFG_CCSR_BRR]
@@ -141,8 +141,8 @@ psci_cpu_on:
 
 	@ Reset target CPU
 	@ Get SCFG base address
-	movw	r0, #(CONFIG_SYS_FSL_SCFG_ADDR & 0xffff)
-	movt	r0, #(CONFIG_SYS_FSL_SCFG_ADDR >> 16)
+	movw	r0, #(CFG_SYS_FSL_SCFG_ADDR & 0xffff)
+	movt	r0, #(CFG_SYS_FSL_SCFG_ADDR >> 16)
 
 	@ Enable CORE Soft Reset
 	movw	r5, #0
@@ -216,8 +216,8 @@ psci_affinity_info:
 	mov	r1, r4
 
 	@ Get RCPM base address
-	movw	r4, #(CONFIG_SYS_FSL_RCPM_ADDR & 0xffff)
-	movt	r4, #(CONFIG_SYS_FSL_RCPM_ADDR >> 16)
+	movw	r4, #(CFG_SYS_FSL_RCPM_ADDR & 0xffff)
+	movt	r4, #(CFG_SYS_FSL_RCPM_ADDR >> 16)
 
 	mov	r0, #PSCI_AFFINITY_LEVEL_ON
 
@@ -236,8 +236,8 @@ out_affinity_info:
 .globl	psci_system_reset
 psci_system_reset:
 	@ Get DCFG base address
-	movw	r1, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff)
-	movt	r1, #(CONFIG_SYS_FSL_GUTS_ADDR >> 16)
+	movw	r1, #(CFG_SYS_FSL_GUTS_ADDR & 0xffff)
+	movt	r1, #(CFG_SYS_FSL_GUTS_ADDR >> 16)
 
 	mov	r2, #DCFG_CCSR_RSTCR_RESET_REQ
 	rev	r2, r2

arch/arm/cpu/armv7/ls102xa/soc.c

@@ -54,7 +54,7 @@ struct smmu_stream_id dev_stream_id[] = {
 
 unsigned int get_soc_major_rev(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int svr, major;
 
 	svr = in_be32(&gur->svr);
@@ -113,7 +113,7 @@ static void erratum_a008850_early(void)
 	/* part 1 of 2 */
 	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
 						CONFIG_SYS_CCI400_OFFSET);
-	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 
 	/* disables propagation of barrier transactions to DDRC from CCI400 */
 	out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
@@ -129,7 +129,7 @@ void erratum_a008850_post(void)
 	/* part 2 of 2 */
 	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
 						CONFIG_SYS_CCI400_OFFSET);
-	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 	u32 tmp;
 
 	/* enable propagation of barrier transactions to DDRC from CCI400 */
@@ -161,7 +161,7 @@ void erratum_a010315(void)
 
 int arch_soc_init(void)
 {
-	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
 					CONFIG_SYS_CCI400_OFFSET);
 	unsigned int major;
@@ -170,7 +170,7 @@ int arch_soc_init(void)
 	enable_layerscape_ns_access();
 #endif
 
-#ifdef CONFIG_FSL_QSPI
+#if defined(CONFIG_FSL_QSPI) && !defined(CONFIG_SYS_FSL_QSPI_SKIP_CLKSEL)
 	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
 #endif
 

arch/arm/cpu/armv7/nonsec_virt.S

@@ -112,8 +112,8 @@ ENTRY(_do_nonsec_entry)
 ENDPROC(_do_nonsec_entry)
 
 .macro get_cbar_addr	addr
-#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
-	ldr	\addr, =CONFIG_ARM_GIC_BASE_ADDRESS
+#ifdef CFG_ARM_GIC_BASE_ADDRESS
+	ldr	\addr, =CFG_ARM_GIC_BASE_ADDRESS
 #else
 	mrc	p15, 4, \addr, c15, c0, 0	@ read CBAR
 	bfc	\addr, #0, #15			@ clear reserved bits
@@ -205,11 +205,11 @@ ENTRY(_nonsec_init)
 	bx	lr
 ENDPROC(_nonsec_init)
 
-#ifdef CONFIG_SMP_PEN_ADDR
+#ifdef CFG_SMP_PEN_ADDR
 /* void __weak smp_waitloop(unsigned previous_address); */
-ENTRY(smp_waitloop)
+WEAK(smp_waitloop)
 	wfi
-	ldr	r1, =CONFIG_SMP_PEN_ADDR	@ load start address
+	ldr	r1, =CFG_SMP_PEN_ADDR	@ load start address
 	ldr	r1, [r1]
 #ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
 	rev	r1, r1
@@ -219,7 +219,6 @@ ENTRY(smp_waitloop)
 	mov	r0, r1
 	b	_do_nonsec_entry
 ENDPROC(smp_waitloop)
-.weak smp_waitloop
 #endif
 
 	.popsection

arch/arm/cpu/armv7/psci.S

@@ -36,34 +36,32 @@ _psci_vectors:
 	b	default_psci_vector	@ irq
 	b	psci_fiq_enter		@ fiq
 
-ENTRY(psci_fiq_enter)
+WEAK(psci_fiq_enter)
 	movs	pc, lr
 ENDPROC(psci_fiq_enter)
-.weak psci_fiq_enter
 
-ENTRY(default_psci_vector)
+WEAK(default_psci_vector)
 	movs	pc, lr
 ENDPROC(default_psci_vector)
-.weak default_psci_vector
 
-ENTRY(psci_version)
-ENTRY(psci_cpu_suspend)
-ENTRY(psci_cpu_off)
-ENTRY(psci_cpu_on)
-ENTRY(psci_affinity_info)
-ENTRY(psci_migrate)
-ENTRY(psci_migrate_info_type)
-ENTRY(psci_migrate_info_up_cpu)
-ENTRY(psci_system_off)
-ENTRY(psci_system_reset)
-ENTRY(psci_features)
-ENTRY(psci_cpu_freeze)
-ENTRY(psci_cpu_default_suspend)
-ENTRY(psci_node_hw_state)
-ENTRY(psci_system_suspend)
-ENTRY(psci_set_suspend_mode)
-ENTRY(psi_stat_residency)
-ENTRY(psci_stat_count)
+WEAK(psci_version)
+WEAK(psci_cpu_suspend)
+WEAK(psci_cpu_off)
+WEAK(psci_cpu_on)
+WEAK(psci_affinity_info)
+WEAK(psci_migrate)
+WEAK(psci_migrate_info_type)
+WEAK(psci_migrate_info_up_cpu)
+WEAK(psci_system_off)
+WEAK(psci_system_reset)
+WEAK(psci_features)
+WEAK(psci_cpu_freeze)
+WEAK(psci_cpu_default_suspend)
+WEAK(psci_node_hw_state)
+WEAK(psci_system_suspend)
+WEAK(psci_set_suspend_mode)
+WEAK(psi_stat_residency)
+WEAK(psci_stat_count)
 	mov	r0, #ARM_PSCI_RET_NI	@ Return -1 (Not Implemented)
 	mov	pc, lr
 ENDPROC(psci_stat_count)
@@ -84,24 +82,6 @@ ENDPROC(psci_cpu_on)
 ENDPROC(psci_cpu_off)
 ENDPROC(psci_cpu_suspend)
 ENDPROC(psci_version)
-.weak psci_version
-.weak psci_cpu_suspend
-.weak psci_cpu_off
-.weak psci_cpu_on
-.weak psci_affinity_info
-.weak psci_migrate
-.weak psci_migrate_info_type
-.weak psci_migrate_info_up_cpu
-.weak psci_system_off
-.weak psci_system_reset
-.weak psci_features
-.weak psci_cpu_freeze
-.weak psci_cpu_default_suspend
-.weak psci_node_hw_state
-.weak psci_system_suspend
-.weak psci_set_suspend_mode
-.weak psi_stat_residency
-.weak psci_stat_count
 
 _psci_table:
 	.word	ARM_PSCI_FN_CPU_SUSPEND
@@ -179,12 +159,11 @@ _smc_psci:
 	movs	pc, lr			@ Return to the kernel
 
 @ Requires dense and single-cluster CPU ID space
-ENTRY(psci_get_cpu_id)
+WEAK(psci_get_cpu_id)
 	mrc	p15, 0, r0, c0, c0, 5	/* read MPIDR */
 	and	r0, r0, #0xff		/* return CPU ID in cluster */
 	bx	lr
 ENDPROC(psci_get_cpu_id)
-.weak psci_get_cpu_id
 
 /* Imported from Linux kernel */
 ENTRY(psci_v7_flush_dcache_all)
@@ -236,7 +215,7 @@ finished:
 	bx	lr
 ENDPROC(psci_v7_flush_dcache_all)
 
-ENTRY(psci_disable_smp)
+WEAK(psci_disable_smp)
 	mrc	p15, 0, r0, c1, c0, 1		@ ACTLR
 	bic	r0, r0, #(1 << 6)		@ Clear SMP bit
 	mcr	p15, 0, r0, c1, c0, 1		@ ACTLR
@@ -244,16 +223,14 @@ ENTRY(psci_disable_smp)
 	dsb
 	bx	lr
 ENDPROC(psci_disable_smp)
-.weak psci_disable_smp
 
-ENTRY(psci_enable_smp)
+WEAK(psci_enable_smp)
 	mrc	p15, 0, r0, c1, c0, 1		@ ACTLR
 	orr	r0, r0, #(1 << 6)		@ Set SMP bit
 	mcr	p15, 0, r0, c1, c0, 1		@ ACTLR
 	isb
 	bx	lr
 ENDPROC(psci_enable_smp)
-.weak psci_enable_smp
 
 ENTRY(psci_cpu_off_common)
 	push	{lr}
@@ -316,15 +293,13 @@ ENTRY(psci_stack_setup)
 	bx	r6
 ENDPROC(psci_stack_setup)
 
-ENTRY(psci_arch_init)
+WEAK(psci_arch_init)
 	mov	pc, lr
 ENDPROC(psci_arch_init)
-.weak psci_arch_init
 
-ENTRY(psci_arch_cpu_entry)
+WEAK(psci_arch_cpu_entry)
 	mov	pc, lr
 ENDPROC(psci_arch_cpu_entry)
-.weak psci_arch_cpu_entry
 
 ENTRY(psci_cpu_entry)
 	bl	psci_enable_smp

arch/arm/cpu/armv7/s5p-common/pwm.c

@@ -7,12 +7,11 @@
 
 #include <common.h>
 #include <errno.h>
-#include <pwm.h>
 #include <asm/io.h>
 #include <asm/arch/pwm.h>
 #include <asm/arch/clk.h>
 
-int pwm_enable(int pwm_id)
+int s5p_pwm_enable(int pwm_id)
 {
 	const struct s5p_timer *pwm =
 #if defined(CONFIG_ARCH_NEXELL)
@@ -30,7 +29,7 @@ int pwm_enable(int pwm_id)
 	return 0;
 }
 
-void pwm_disable(int pwm_id)
+void s5p_pwm_disable(int pwm_id)
 {
 	const struct s5p_timer *pwm =
 #if defined(CONFIG_ARCH_NEXELL)
@@ -92,7 +91,7 @@ static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq)
 
 #define NS_IN_SEC 1000000000UL
 
-int pwm_config(int pwm_id, int duty_ns, int period_ns)
+int s5p_pwm_config(int pwm_id, int duty_ns, int period_ns)
 {
 	const struct s5p_timer *pwm =
 #if defined(CONFIG_ARCH_NEXELL)
@@ -157,7 +156,7 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns)
 	return 0;
 }
 
-int pwm_init(int pwm_id, int div, int invert)
+int s5p_pwm_init(int pwm_id, int div, int invert)
 {
 	u32 val;
 	const struct s5p_timer *pwm =
@@ -219,7 +218,7 @@ int pwm_init(int pwm_id, int div, int invert)
 		val |= TCON_INVERTER(pwm_id);
 	writel(val, &pwm->tcon);
 
-	pwm_enable(pwm_id);
+	s5p_pwm_enable(pwm_id);
 
 	return 0;
 }

arch/arm/cpu/armv7/s5p-common/timer.c

@@ -16,10 +16,6 @@
 #include <asm/arch/clk.h>
 #include <linux/delay.h>
 
-/* Use the old PWM interface for now */
-#undef CONFIG_DM_PWM
-#include <pwm.h>
-
 DECLARE_GLOBAL_DATA_PTR;
 
 unsigned long get_current_tick(void);
@@ -49,9 +45,9 @@ static unsigned long timer_get_us_down(void)
 int timer_init(void)
 {
 	/* PWM Timer 4 */
-	pwm_init(4, MUX_DIV_4, 0);
-	pwm_config(4, 100000, 100000);
-	pwm_enable(4);
+	s5p_pwm_init(4, MUX_DIV_4, 0);
+	s5p_pwm_config(4, 100000, 100000);
+	s5p_pwm_enable(4);
 
 	/* Use this as the current monotonic time in us */
 	gd->arch.timer_reset_value = 0;
@@ -86,7 +82,7 @@ unsigned long get_timer(unsigned long base)
 	return time_ms - base;
 }
 
-unsigned long __attribute__((no_instrument_function)) timer_get_us(void)
+unsigned long notrace timer_get_us(void)
 {
 	static unsigned long base_time_us;
 

arch/arm/cpu/armv7/s5p4418/cpu.c

@@ -13,10 +13,8 @@
 #include <asm/io.h>
 #include <asm/arch/nexell.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/reset.h>
 #include <asm/arch/tieoff.h>
 #include <cpu_func.h>
-#include <linux/delay.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -45,39 +43,12 @@ static void cpu_soc_init(void)
 	nx_tieoff_set(NX_TIEOFF_CORTEXA9MP_TOP_QUADL2C_L2RET1N_1, 1);
 }
 
-#ifdef CONFIG_PL011_SERIAL
-static void serial_device_init(void)
-{
-	char dev[10];
-	int id;
-
-	sprintf(dev, "nx-uart.%d", CONFIG_CONS_INDEX);
-	id = RESET_ID_UART0 + CONFIG_CONS_INDEX;
-
-	struct clk *clk = clk_get((const char *)dev);
-
-	/* reset control: Low active ___|---   */
-	nx_rstcon_setrst(id, RSTCON_ASSERT);
-	udelay(10);
-	nx_rstcon_setrst(id, RSTCON_NEGATE);
-	udelay(10);
-
-	/* set clock   */
-	clk_disable(clk);
-	clk_set_rate(clk, CONFIG_PL011_CLOCK);
-	clk_enable(clk);
-}
-#endif
-
 int arch_cpu_init(void)
 {
 	flush_dcache_all();
 	cpu_soc_init();
 	clk_init();
 
-	if (IS_ENABLED(CONFIG_PL011_SERIAL))
-		serial_device_init();
-
 	return 0;
 }
 

arch/arm/cpu/armv7/start.S

@@ -151,16 +151,14 @@ ENDPROC(c_runtime_cpu_setup)
  * Don't save anything to stack even if compiled with -O0
  *
  *************************************************************************/
-ENTRY(save_boot_params)
+WEAK(save_boot_params)
 	b	save_boot_params_ret		@ back to my caller
 ENDPROC(save_boot_params)
-	.weak	save_boot_params
 
 #ifdef CONFIG_ARMV7_LPAE
-ENTRY(switch_to_hypervisor)
+WEAK(switch_to_hypervisor)
 	b	switch_to_hypervisor_ret
 ENDPROC(switch_to_hypervisor)
-	.weak	switch_to_hypervisor
 #endif
 
 /*************************************************************************

arch/arm/cpu/armv7/stv0991/timer.c

@@ -18,7 +18,7 @@ static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
 				(struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
 
 #define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
-#define GPT_RESOLUTION	(CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
+#define GPT_RESOLUTION	(CFG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -67,7 +67,7 @@ void __udelay(unsigned long usec)
 {
 	ulong tmo;
 	ulong start = get_timer_masked();
-	ulong tenudelcnt = CONFIG_SYS_HZ_CLOCK / (1000 * 100);
+	ulong tenudelcnt = CFG_SYS_HZ_CLOCK / (1000 * 100);
 	ulong rndoff;
 
 	rndoff = (usec % 10) ? 1 : 0;

arch/arm/cpu/armv7/sunxi/fel_utils.S

@@ -20,8 +20,6 @@ ENTRY(save_boot_params)
 	str	lr, [r0, #12]
 	mrc	p15, 0, lr, c12, c0, 0	@ Read VBAR
 	str	lr, [r0, #16]
-	mrc	p15, 0, lr, c1, c0, 0	@ Read CP15 Control Register
-	str	lr, [r0, #20]
 	b	save_boot_params_ret
 ENDPROC(save_boot_params)
 
@@ -29,8 +27,6 @@ ENTRY(return_to_fel)
 	mov	sp, r0
 	mov	lr, r1
 	ldr	r0, =fel_stash
-	ldr	r1, [r0, #20]
-	mcr	p15, 0, r1, c1, c0, 0	@ Write CP15 Control Register
 	ldr	r1, [r0, #16]
 	mcr	p15, 0, r1, c12, c0, 0	@ Write VBAR
 	ldr	r1, [r0, #12]

arch/arm/cpu/armv7/virt-v7.c

@@ -26,8 +26,8 @@ static unsigned int read_id_pfr1(void)
 
 static unsigned long get_gicd_base_address(void)
 {
-#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
-	return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
+#ifdef CFG_ARM_GIC_BASE_ADDRESS
+	return CFG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
 #else
 	unsigned periphbase;
 

arch/arm/cpu/armv7m/systick-timer.c

@@ -18,7 +18,7 @@
  * The number of reference clock ticks that correspond to 10ms is normally
  * defined in the SysTick Calibration register's TENMS field. However, on some
  * devices this is wrong, so this driver allows the clock rate to be defined
- * using CONFIG_SYS_HZ_CLOCK.
+ * using CFG_SYS_HZ_CLOCK.
  */
 
 #include <common.h>
@@ -76,10 +76,10 @@ int timer_init(void)
 
 	/*
 	 * If the TENMS field is inexact or wrong, specify the clock rate using
-	 * CONFIG_SYS_HZ_CLOCK.
+	 * CFG_SYS_HZ_CLOCK.
 	 */
-#if defined(CONFIG_SYS_HZ_CLOCK)
-	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK;
+#if defined(CFG_SYS_HZ_CLOCK)
+	gd->arch.timer_rate_hz = CFG_SYS_HZ_CLOCK;
 #else
 	gd->arch.timer_rate_hz = (cal & SYSTICK_CAL_TENMS_MASK) * 100;
 #endif

arch/arm/cpu/armv8/Makefile

@@ -39,7 +39,6 @@ obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o
 endif
 
 obj-$(CONFIG_FSL_LAYERSCAPE) += fsl-layerscape/
-obj-$(CONFIG_S32V234) += s32v234/
 obj-$(CONFIG_TARGET_HIKEY) += hisilicon/
 obj-$(CONFIG_ARMV8_PSCI) += psci.o
 obj-$(CONFIG_TARGET_BCMNS3) += bcmns3/

arch/arm/cpu/armv8/fel_utils.S

@@ -39,15 +39,15 @@ ENTRY(return_to_fel)
 	adr	x1, fel_stash_addr	// to find the fel_stash address in AA32
 	str	w2, [x1]
 
-	ldr	x0, =0xfa50392f		// CPU hotplug magic
+	ldr	w0, =0xfa50392f		// CPU hotplug magic
 #ifdef CONFIG_MACH_SUN50I_H616
-	ldr	x2, =(SUNXI_R_CPUCFG_BASE + 0x1c0)
+	ldr	w2, =(SUNXI_R_CPUCFG_BASE + 0x1c0)
 	str	w0, [x2], #0x4
 #elif CONFIG_MACH_SUN50I_H6
-	ldr	x2, =(SUNXI_RTC_BASE + 0x1b8)	// BOOT_CPU_HP_FLAG_REG
+	ldr	w2, =(SUNXI_RTC_BASE + 0x1b8)	// BOOT_CPU_HP_FLAG_REG
 	str	w0, [x2], #0x4
 #else
-	ldr	x2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base
+	ldr	w2, =(SUNXI_CPUCFG_BASE + 0x1a4) // offset for CPU hotplug base
 	str	w0, [x2, #0x8]
 #endif
 	adr	x0, back_in_32

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -29,6 +29,7 @@ config ARCH_LS1028A
 	select ESBC_HDR_LS if CHAIN_OF_TRUST
 	select FSL_LAYERSCAPE
 	select FSL_LSCH3
+	select FSL_TZASC_400
 	select GICV3
 	select NXP_LSCH3_2
 	select SYS_FSL_HAS_CCI400
@@ -69,6 +70,7 @@ config ARCH_LS1043A
 	select GICV2
 	select HAS_FSL_XHCI_USB if USB_HOST
 	select SKIP_LOWLEVEL_INIT
+	select SYS_DPAA_FMAN
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
@@ -106,6 +108,7 @@ config ARCH_LS1046A
 	select GICV2
 	select HAS_FSL_XHCI_USB if USB_HOST
 	select SKIP_LOWLEVEL_INIT
+	select SYS_DPAA_FMAN
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
@@ -522,13 +525,6 @@ config SYS_CCI400_OFFSET
 	  Offset for CCI400 base
 	  CCI400 base addr = CCSRBAR + CCI400_OFFSET
 
-config SYS_FSL_IFC_BANK_COUNT
-	int "Maximum banks of Integrated flash controller"
-	depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A
-	default 4 if ARCH_LS1043A
-	default 4 if ARCH_LS1046A
-	default 8 if ARCH_LS2080A || ARCH_LS1088A
-
 config SYS_FSL_HAS_CCI400
 	bool
 
@@ -571,18 +567,9 @@ config SYS_DP_DDR_BASE_PHY
 	  DDR controller uses this value as the base address for binding.
 	  It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
 
-config SYS_FSL_SRDS_1
-	bool
-
-config SYS_FSL_SRDS_2
-	bool
-
 config SYS_NXP_SRDS_3
 	bool
 
-config SYS_HAS_SERDES
-	bool
-
 config FSL_TZASC_1
 	bool
 

arch/arm/cpu/armv8/fsl-layerscape/cpu.c

@@ -91,36 +91,36 @@ static struct cpu_type cpu_type_list[] = {
 #define EARLY_PGTABLE_SIZE 0x5000
 static struct mm_region early_map[] = {
 #ifdef CONFIG_FSL_LSCH3
-	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE,
+	{ CFG_SYS_FSL_CCSR_BASE, CFG_SYS_FSL_CCSR_BASE,
+	  CFG_SYS_FSL_CCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	{ CFG_SYS_FSL_OCRAM_BASE, CFG_SYS_FSL_OCRAM_BASE,
 	  SYS_FSL_OCRAM_SPACE_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
 	},
-	{ CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
-	  CONFIG_SYS_FSL_QSPI_SIZE1,
+	{ CFG_SYS_FSL_QSPI_BASE1, CFG_SYS_FSL_QSPI_BASE1,
+	  CFG_SYS_FSL_QSPI_SIZE1,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE},
 #ifdef CONFIG_FSL_IFC
 	/* For IFC Region #1, only the first 4MB is cache-enabled */
-	{ CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_BASE1,
-	  CONFIG_SYS_FSL_IFC_SIZE1_1,
+	{ CFG_SYS_FSL_IFC_BASE1, CFG_SYS_FSL_IFC_BASE1,
+	  CFG_SYS_FSL_IFC_SIZE1_1,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
 	},
-	{ CONFIG_SYS_FSL_IFC_BASE1 + CONFIG_SYS_FSL_IFC_SIZE1_1,
-	  CONFIG_SYS_FSL_IFC_BASE1 + CONFIG_SYS_FSL_IFC_SIZE1_1,
-	  CONFIG_SYS_FSL_IFC_SIZE1 - CONFIG_SYS_FSL_IFC_SIZE1_1,
+	{ CFG_SYS_FSL_IFC_BASE1 + CFG_SYS_FSL_IFC_SIZE1_1,
+	  CFG_SYS_FSL_IFC_BASE1 + CFG_SYS_FSL_IFC_SIZE1_1,
+	  CFG_SYS_FSL_IFC_SIZE1 - CFG_SYS_FSL_IFC_SIZE1_1,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
 	},
-	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FSL_IFC_BASE1,
-	  CONFIG_SYS_FSL_IFC_SIZE1,
+	{ CFG_SYS_FLASH_BASE, CFG_SYS_FSL_IFC_BASE1,
+	  CFG_SYS_FSL_IFC_SIZE1,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
 	},
 #endif
-	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
-	  CONFIG_SYS_FSL_DRAM_SIZE1,
+	{ CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1,
+	  CFG_SYS_FSL_DRAM_SIZE1,
 #if defined(CONFIG_TFABOOT) || \
 	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
@@ -130,56 +130,56 @@ static struct mm_region early_map[] = {
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 #ifdef CONFIG_FSL_IFC
-	/* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */
-	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
-	  CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2,
+	/* Map IFC region #2 up to CFG_SYS_FLASH_BASE for NAND boot */
+	{ CFG_SYS_FSL_IFC_BASE2, CFG_SYS_FSL_IFC_BASE2,
+	  CFG_SYS_FLASH_BASE - CFG_SYS_FSL_IFC_BASE2,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
 	},
 #endif
-	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE,
+	{ CFG_SYS_FSL_DCSR_BASE, CFG_SYS_FSL_DCSR_BASE,
+	  CFG_SYS_FSL_DCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
-	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	{ CFG_SYS_FSL_DRAM_BASE2, CFG_SYS_FSL_DRAM_BASE2,
+	  CFG_SYS_FSL_DRAM_SIZE2,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
-#ifdef CONFIG_SYS_FSL_DRAM_BASE3
-	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
-	  CONFIG_SYS_FSL_DRAM_SIZE3,
+#ifdef CFG_SYS_FSL_DRAM_BASE3
+	{ CFG_SYS_FSL_DRAM_BASE3, CFG_SYS_FSL_DRAM_BASE3,
+	  CFG_SYS_FSL_DRAM_SIZE3,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 #endif
 #elif defined(CONFIG_FSL_LSCH2)
-	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE,
+	{ CFG_SYS_FSL_CCSR_BASE, CFG_SYS_FSL_CCSR_BASE,
+	  CFG_SYS_FSL_CCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	{ CFG_SYS_FSL_OCRAM_BASE, CFG_SYS_FSL_OCRAM_BASE,
 	  SYS_FSL_OCRAM_SPACE_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
 	},
-	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE,
+	{ CFG_SYS_FSL_DCSR_BASE, CFG_SYS_FSL_DCSR_BASE,
+	  CFG_SYS_FSL_DCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_QSPI_BASE, CONFIG_SYS_FSL_QSPI_BASE,
-	  CONFIG_SYS_FSL_QSPI_SIZE,
+	{ CFG_SYS_FSL_QSPI_BASE, CFG_SYS_FSL_QSPI_BASE,
+	  CFG_SYS_FSL_QSPI_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
 	},
 #ifdef CONFIG_FSL_IFC
-	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
-	  CONFIG_SYS_FSL_IFC_SIZE,
+	{ CFG_SYS_FSL_IFC_BASE, CFG_SYS_FSL_IFC_BASE,
+	  CFG_SYS_FSL_IFC_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
 	},
 #endif
-	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
-	  CONFIG_SYS_FSL_DRAM_SIZE1,
+	{ CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1,
+	  CFG_SYS_FSL_DRAM_SIZE1,
 #if defined(CONFIG_TFABOOT) || \
 	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
@@ -188,8 +188,8 @@ static struct mm_region early_map[] = {
 #endif
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
-	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
-	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	{ CFG_SYS_FSL_DRAM_BASE2, CFG_SYS_FSL_DRAM_BASE2,
+	  CFG_SYS_FSL_DRAM_SIZE2,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_PXN | PTE_BLOCK_UXN |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
@@ -199,84 +199,84 @@ static struct mm_region early_map[] = {
 
 static struct mm_region final_map[] = {
 #ifdef CONFIG_FSL_LSCH3
-	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE,
+	{ CFG_SYS_FSL_CCSR_BASE, CFG_SYS_FSL_CCSR_BASE,
+	  CFG_SYS_FSL_CCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	{ CFG_SYS_FSL_OCRAM_BASE, CFG_SYS_FSL_OCRAM_BASE,
 	  SYS_FSL_OCRAM_SPACE_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
 	},
-	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
-	  CONFIG_SYS_FSL_DRAM_SIZE1,
+	{ CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1,
+	  CFG_SYS_FSL_DRAM_SIZE1,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
-	{ CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1,
-	  CONFIG_SYS_FSL_QSPI_SIZE1,
+	{ CFG_SYS_FSL_QSPI_BASE1, CFG_SYS_FSL_QSPI_BASE1,
+	  CFG_SYS_FSL_QSPI_SIZE1,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
-	  CONFIG_SYS_FSL_QSPI_SIZE2,
+	{ CFG_SYS_FSL_QSPI_BASE2, CFG_SYS_FSL_QSPI_BASE2,
+	  CFG_SYS_FSL_QSPI_SIZE2,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 #ifdef CONFIG_FSL_IFC
-	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
-	  CONFIG_SYS_FSL_IFC_SIZE2,
+	{ CFG_SYS_FSL_IFC_BASE2, CFG_SYS_FSL_IFC_BASE2,
+	  CFG_SYS_FSL_IFC_SIZE2,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 #endif
-	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE,
+	{ CFG_SYS_FSL_DCSR_BASE, CFG_SYS_FSL_DCSR_BASE,
+	  CFG_SYS_FSL_DCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_MC_BASE, CONFIG_SYS_FSL_MC_BASE,
-	  CONFIG_SYS_FSL_MC_SIZE,
+	{ CFG_SYS_FSL_MC_BASE, CFG_SYS_FSL_MC_BASE,
+	  CFG_SYS_FSL_MC_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_NI_BASE, CONFIG_SYS_FSL_NI_BASE,
-	  CONFIG_SYS_FSL_NI_SIZE,
+	{ CFG_SYS_FSL_NI_BASE, CFG_SYS_FSL_NI_BASE,
+	  CFG_SYS_FSL_NI_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 	/* For QBMAN portal, only the first 64MB is cache-enabled */
-	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
-	  CONFIG_SYS_FSL_QBMAN_SIZE_1,
+	{ CFG_SYS_FSL_QBMAN_BASE, CFG_SYS_FSL_QBMAN_BASE,
+	  CFG_SYS_FSL_QBMAN_SIZE_1,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN | PTE_BLOCK_NS
 	},
-	{ CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
-	  CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
-	  CONFIG_SYS_FSL_QBMAN_SIZE - CONFIG_SYS_FSL_QBMAN_SIZE_1,
+	{ CFG_SYS_FSL_QBMAN_BASE + CFG_SYS_FSL_QBMAN_SIZE_1,
+	  CFG_SYS_FSL_QBMAN_BASE + CFG_SYS_FSL_QBMAN_SIZE_1,
+	  CFG_SYS_FSL_QBMAN_SIZE - CFG_SYS_FSL_QBMAN_SIZE_1,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
-	  CONFIG_SYS_PCIE1_PHYS_SIZE,
+	{ CFG_SYS_PCIE1_PHYS_ADDR, CFG_SYS_PCIE1_PHYS_ADDR,
+	  CFG_SYS_PCIE1_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
-	  CONFIG_SYS_PCIE2_PHYS_SIZE,
+	{ CFG_SYS_PCIE2_PHYS_ADDR, CFG_SYS_PCIE2_PHYS_ADDR,
+	  CFG_SYS_PCIE2_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
-	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
-	  CONFIG_SYS_PCIE3_PHYS_SIZE,
+#ifdef CFG_SYS_PCIE3_PHYS_ADDR
+	{ CFG_SYS_PCIE3_PHYS_ADDR, CFG_SYS_PCIE3_PHYS_ADDR,
+	  CFG_SYS_PCIE3_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 #endif
-#ifdef CONFIG_SYS_PCIE4_PHYS_ADDR
-	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
-	  CONFIG_SYS_PCIE4_PHYS_SIZE,
+#ifdef CFG_SYS_PCIE4_PHYS_ADDR
+	{ CFG_SYS_PCIE4_PHYS_ADDR, CFG_SYS_PCIE4_PHYS_ADDR,
+	  CFG_SYS_PCIE4_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
@@ -295,29 +295,29 @@ static struct mm_region final_map[] = {
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 #endif
-	{ CONFIG_SYS_FSL_WRIOP1_BASE, CONFIG_SYS_FSL_WRIOP1_BASE,
-	  CONFIG_SYS_FSL_WRIOP1_SIZE,
+	{ CFG_SYS_FSL_WRIOP1_BASE, CFG_SYS_FSL_WRIOP1_BASE,
+	  CFG_SYS_FSL_WRIOP1_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_AIOP1_BASE, CONFIG_SYS_FSL_AIOP1_BASE,
-	  CONFIG_SYS_FSL_AIOP1_SIZE,
+	{ CFG_SYS_FSL_AIOP1_BASE, CFG_SYS_FSL_AIOP1_BASE,
+	  CFG_SYS_FSL_AIOP1_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_PEBUF_BASE, CONFIG_SYS_FSL_PEBUF_BASE,
-	  CONFIG_SYS_FSL_PEBUF_SIZE,
+	{ CFG_SYS_FSL_PEBUF_BASE, CFG_SYS_FSL_PEBUF_BASE,
+	  CFG_SYS_FSL_PEBUF_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
-	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	{ CFG_SYS_FSL_DRAM_BASE2, CFG_SYS_FSL_DRAM_BASE2,
+	  CFG_SYS_FSL_DRAM_SIZE2,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
-#ifdef CONFIG_SYS_FSL_DRAM_BASE3
-	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
-	  CONFIG_SYS_FSL_DRAM_SIZE3,
+#ifdef CFG_SYS_FSL_DRAM_BASE3
+	{ CFG_SYS_FSL_DRAM_BASE3, CFG_SYS_FSL_DRAM_BASE3,
+	  CFG_SYS_FSL_DRAM_SIZE3,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
@@ -328,70 +328,70 @@ static struct mm_region final_map[] = {
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE,
+	{ CFG_SYS_FSL_CCSR_BASE, CFG_SYS_FSL_CCSR_BASE,
+	  CFG_SYS_FSL_CCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
+	{ CFG_SYS_FSL_OCRAM_BASE, CFG_SYS_FSL_OCRAM_BASE,
 	  SYS_FSL_OCRAM_SPACE_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_NON_SHARE
 	},
-	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE,
+	{ CFG_SYS_FSL_DCSR_BASE, CFG_SYS_FSL_DCSR_BASE,
+	  CFG_SYS_FSL_DCSR_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_QSPI_BASE, CONFIG_SYS_FSL_QSPI_BASE,
-	  CONFIG_SYS_FSL_QSPI_SIZE,
+	{ CFG_SYS_FSL_QSPI_BASE, CFG_SYS_FSL_QSPI_BASE,
+	  CFG_SYS_FSL_QSPI_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 #ifdef CONFIG_FSL_IFC
-	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
-	  CONFIG_SYS_FSL_IFC_SIZE,
+	{ CFG_SYS_FSL_IFC_BASE, CFG_SYS_FSL_IFC_BASE,
+	  CFG_SYS_FSL_IFC_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE
 	},
 #endif
-	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
-	  CONFIG_SYS_FSL_DRAM_SIZE1,
+	{ CFG_SYS_FSL_DRAM_BASE1, CFG_SYS_FSL_DRAM_BASE1,
+	  CFG_SYS_FSL_DRAM_SIZE1,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
-	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
-	  CONFIG_SYS_FSL_QBMAN_SIZE,
+	{ CFG_SYS_FSL_QBMAN_BASE, CFG_SYS_FSL_QBMAN_BASE,
+	  CFG_SYS_FSL_QBMAN_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
-	  CONFIG_SYS_FSL_DRAM_SIZE2,
+	{ CFG_SYS_FSL_DRAM_BASE2, CFG_SYS_FSL_DRAM_BASE2,
+	  CFG_SYS_FSL_DRAM_SIZE2,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
-	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
-	  CONFIG_SYS_PCIE1_PHYS_SIZE,
+	{ CFG_SYS_PCIE1_PHYS_ADDR, CFG_SYS_PCIE1_PHYS_ADDR,
+	  CFG_SYS_PCIE1_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
-	  CONFIG_SYS_PCIE2_PHYS_SIZE,
+	{ CFG_SYS_PCIE2_PHYS_ADDR, CFG_SYS_PCIE2_PHYS_ADDR,
+	  CFG_SYS_PCIE2_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
-#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
-	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
-	  CONFIG_SYS_PCIE3_PHYS_SIZE,
+#ifdef CFG_SYS_PCIE3_PHYS_ADDR
+	{ CFG_SYS_PCIE3_PHYS_ADDR, CFG_SYS_PCIE3_PHYS_ADDR,
+	  CFG_SYS_PCIE3_PHYS_SIZE,
 	  PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
 	  PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN
 	},
 #endif
-	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
-	  CONFIG_SYS_FSL_DRAM_SIZE3,
+	{ CFG_SYS_FSL_DRAM_BASE3, CFG_SYS_FSL_DRAM_BASE3,
+	  CFG_SYS_FSL_DRAM_SIZE3,
 	  PTE_BLOCK_MEMTYPE(MT_NORMAL) |
 	  PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS
 	},
 #endif
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	{},	/* space holder for secure mem */
 #endif
 	{},
@@ -401,7 +401,7 @@ struct mm_region *mem_map = early_map;
 
 void cpu_name(char *name)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int i, svr, ver;
 
 	svr = gur_in32(&gur->svr);
@@ -430,7 +430,7 @@ void cpu_name(char *name)
 #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
 /*
  * To start MMU before DDR is available, we create MMU table in SRAM.
- * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
+ * The base address of SRAM is CFG_SYS_FSL_OCRAM_BASE. We use three
  * levels of translation tables here to cover 40-bit address space.
  * We use 4KB granule size, with 40 bits physical address, T0SZ=24
  * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
@@ -443,9 +443,9 @@ static inline void early_mmu_setup(void)
 
 	/* global data is already setup, no allocation yet */
 	if (el == 3)
-		gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
+		gd->arch.tlb_addr = CFG_SYS_FSL_OCRAM_BASE;
 	else
-		gd->arch.tlb_addr = CONFIG_SYS_DDR_SDRAM_BASE;
+		gd->arch.tlb_addr = CFG_SYS_DDR_SDRAM_BASE;
 	gd->arch.tlb_fillptr = gd->arch.tlb_addr;
 	gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
 
@@ -466,7 +466,7 @@ static void fix_pcie_mmu_map(void)
 #ifdef CONFIG_ARCH_LS2080A
 	unsigned int i;
 	u32 svr, ver;
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 
 	svr = gur_in32(&gur->svr);
 	ver = SVR_SOC_VER(svr);
@@ -477,25 +477,25 @@ static void fix_pcie_mmu_map(void)
 	    (ver == SVR_LS2081A) || (ver == SVR_LS2041A)) {
 		for (i = 0; i < ARRAY_SIZE(final_map); i++) {
 			switch (final_map[i].phys) {
-			case CONFIG_SYS_PCIE1_PHYS_ADDR:
+			case CFG_SYS_PCIE1_PHYS_ADDR:
 				final_map[i].phys = 0x2000000000ULL;
 				final_map[i].virt = 0x2000000000ULL;
 				final_map[i].size = 0x800000000ULL;
 				break;
-			case CONFIG_SYS_PCIE2_PHYS_ADDR:
+			case CFG_SYS_PCIE2_PHYS_ADDR:
 				final_map[i].phys = 0x2800000000ULL;
 				final_map[i].virt = 0x2800000000ULL;
 				final_map[i].size = 0x800000000ULL;
 				break;
-#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR
-			case CONFIG_SYS_PCIE3_PHYS_ADDR:
+#ifdef CFG_SYS_PCIE3_PHYS_ADDR
+			case CFG_SYS_PCIE3_PHYS_ADDR:
 				final_map[i].phys = 0x3000000000ULL;
 				final_map[i].virt = 0x3000000000ULL;
 				final_map[i].size = 0x800000000ULL;
 				break;
 #endif
-#ifdef CONFIG_SYS_PCIE4_PHYS_ADDR
-			case CONFIG_SYS_PCIE4_PHYS_ADDR:
+#ifdef CFG_SYS_PCIE4_PHYS_ADDR
+			case CFG_SYS_PCIE4_PHYS_ADDR:
 				final_map[i].phys = 0x3800000000ULL;
 				final_map[i].virt = 0x3800000000ULL;
 				final_map[i].size = 0x800000000ULL;
@@ -536,13 +536,13 @@ static inline void final_mmu_setup(void)
 		 * table.
 		 */
 		switch (final_map[index].virt) {
-		case CONFIG_SYS_FSL_DRAM_BASE1:
+		case CFG_SYS_FSL_DRAM_BASE1:
 			final_map[index].virt = gd->bd->bi_dram[0].start;
 			final_map[index].phys = gd->bd->bi_dram[0].start;
 			final_map[index].size = gd->bd->bi_dram[0].size;
 			break;
-#ifdef CONFIG_SYS_FSL_DRAM_BASE2
-		case CONFIG_SYS_FSL_DRAM_BASE2:
+#ifdef CFG_SYS_FSL_DRAM_BASE2
+		case CFG_SYS_FSL_DRAM_BASE2:
 #if (CONFIG_NR_DRAM_BANKS >= 2)
 			final_map[index].virt = gd->bd->bi_dram[1].start;
 			final_map[index].phys = gd->bd->bi_dram[1].start;
@@ -552,8 +552,8 @@ static inline void final_mmu_setup(void)
 #endif
 		break;
 #endif
-#ifdef CONFIG_SYS_FSL_DRAM_BASE3
-		case CONFIG_SYS_FSL_DRAM_BASE3:
+#ifdef CFG_SYS_FSL_DRAM_BASE3
+		case CFG_SYS_FSL_DRAM_BASE3:
 #if (CONFIG_NR_DRAM_BANKS >= 3)
 			final_map[index].virt = gd->bd->bi_dram[2].start;
 			final_map[index].phys = gd->bd->bi_dram[2].start;
@@ -568,7 +568,7 @@ static inline void final_mmu_setup(void)
 		}
 	}
 
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
 		if (el == 3) {
 			/*
@@ -580,7 +580,7 @@ static inline void final_mmu_setup(void)
 			gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
 			final_map[index].virt = gd->arch.secure_ram & ~0x3;
 			final_map[index].phys = final_map[index].virt;
-			final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
+			final_map[index].size = CFG_SYS_MEM_RESERVE_SECURE;
 			final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
 			gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
 			tlb_addr_save = gd->arch.tlb_addr;
@@ -760,7 +760,7 @@ enum boot_src __get_boot_src(u32 porsr1)
 	}
 #endif
 
-	if (CONFIG_IS_ENABLED(SYS_FSL_ERRATUM_A010539) && !rcw_src)
+	if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_A010539) && !rcw_src)
 		src = BOOT_SOURCE_QSPI_NOR;
 
 	debug("%s: src 0x%x\n", __func__, src);
@@ -775,7 +775,7 @@ enum boot_src get_boot_src(void)
 #if defined(CONFIG_FSL_LSCH3)
 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
 #elif defined(CONFIG_FSL_LSCH2)
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 #endif
 
 	if (current_el() == 2) {
@@ -863,7 +863,7 @@ enum env_location arch_env_get_location(enum env_operation op, int prio)
 
 u32 initiator_type(u32 cluster, int init_id)
 {
-	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
 	u32 type = 0;
 
@@ -876,7 +876,7 @@ u32 initiator_type(u32 cluster, int init_id)
 
 u32 cpu_pos_mask(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	int i = 0;
 	u32 cluster, type, mask = 0;
 
@@ -897,7 +897,7 @@ u32 cpu_pos_mask(void)
 
 u32 cpu_mask(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	int i = 0, count = 0;
 	u32 cluster, type, mask = 0;
 
@@ -930,7 +930,7 @@ int cpu_numcores(void)
 int fsl_qoriq_core_to_cluster(unsigned int core)
 {
 	struct ccsr_gur __iomem *gur =
-		(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+		(void __iomem *)(CFG_SYS_FSL_GUTS_ADDR);
 	int i = 0, count = 0;
 	u32 cluster;
 
@@ -954,7 +954,7 @@ int fsl_qoriq_core_to_cluster(unsigned int core)
 u32 fsl_qoriq_core_to_type(unsigned int core)
 {
 	struct ccsr_gur __iomem *gur =
-		(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
+		(void __iomem *)(CFG_SYS_FSL_GUTS_ADDR);
 	int i = 0, count = 0;
 	u32 cluster, type;
 
@@ -979,7 +979,7 @@ u32 fsl_qoriq_core_to_type(unsigned int core)
 #ifndef CONFIG_FSL_LSCH3
 uint get_svr(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 
 	return gur_in32(&gur->svr);
 }
@@ -988,7 +988,7 @@ uint get_svr(void)
 #ifdef CONFIG_DISPLAY_CPUINFO
 int print_cpuinfo(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	struct sys_info sysinfo;
 	char buf[32];
 	unsigned int i, core;
@@ -1057,9 +1057,6 @@ int cpu_eth_init(struct bd_info *bis)
 
 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 	error = fsl_mc_ldpaa_init(bis);
-#endif
-#ifdef CONFIG_FMAN_ENET
-	fm_standard_init(bis);
 #endif
 	return error;
 }
@@ -1179,9 +1176,9 @@ int arch_early_init_r(void)
 
 int timer_init(void)
 {
-	u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
+	u32 __iomem *cntcr = (u32 *)CFG_SYS_FSL_TIMER_ADDR;
 #ifdef CONFIG_FSL_LSCH3
-	u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
+	u32 __iomem *cltbenr = (u32 *)CFG_SYS_FSL_PMU_CLTBENR;
 #endif
 #if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
 	defined(CONFIG_ARCH_LS1028A)
@@ -1230,7 +1227,7 @@ int timer_init(void)
 }
 
 #if !CONFIG_IS_ENABLED(SYSRESET)
-__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
+__efi_runtime_data u32 __iomem *rstcr = (u32 *)CFG_SYS_FSL_RST_ADDR;
 
 void __efi_runtime reset_cpu(void)
 {
@@ -1311,22 +1308,22 @@ phys_size_t get_effective_memsize(void)
 	 * allocated from first region. If the memory extends to  the second
 	 * region (or the third region if applicable), Management Complex (MC)
 	 * memory should be put into the highest region, i.e. the end of DDR
-	 * memory. CONFIG_MAX_MEM_MAPPED is set to the size of first region so
+	 * memory. CFG_MAX_MEM_MAPPED is set to the size of first region so
 	 * U-Boot doesn't relocate itself into higher address. Should DDR be
 	 * configured to skip the first region, this function needs to be
 	 * adjusted.
 	 */
-	if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
-		ea_size = CONFIG_MAX_MEM_MAPPED;
+	if (gd->ram_size > CFG_MAX_MEM_MAPPED) {
+		ea_size = CFG_MAX_MEM_MAPPED;
 		rem = gd->ram_size - ea_size;
 	} else {
 		ea_size = gd->ram_size;
 	}
 
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	/* Check if we have enough space for secure memory */
-	if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE)
-		ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+	if (ea_size > CFG_SYS_MEM_RESERVE_SECURE)
+		ea_size -= CFG_SYS_MEM_RESERVE_SECURE;
 	else
 		printf("Error: No enough space for secure memory.\n");
 #endif
@@ -1433,7 +1430,7 @@ int dram_init_banksize(void)
 	 * gd->arch.secure_ram should be done to avoid running it repeatedly.
 	 */
 
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
 		debug("No need to run again, skip %s\n", __func__);
 
@@ -1441,12 +1438,12 @@ int dram_init_banksize(void)
 	}
 #endif
 
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
-		gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
-		gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+	gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE;
+	if (gd->ram_size > CFG_SYS_DDR_BLOCK1_SIZE) {
+		gd->bd->bi_dram[0].size = CFG_SYS_DDR_BLOCK1_SIZE;
+		gd->bd->bi_dram[1].start = CFG_SYS_DDR_BLOCK2_BASE;
 		gd->bd->bi_dram[1].size = gd->ram_size -
-					  CONFIG_SYS_DDR_BLOCK1_SIZE;
+					  CFG_SYS_DDR_BLOCK1_SIZE;
 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 		if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
 			gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
@@ -1458,17 +1455,17 @@ int dram_init_banksize(void)
 	} else {
 		gd->bd->bi_dram[0].size = gd->ram_size;
 	}
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	if (gd->bd->bi_dram[0].size >
-				CONFIG_SYS_MEM_RESERVE_SECURE) {
+				CFG_SYS_MEM_RESERVE_SECURE) {
 		gd->bd->bi_dram[0].size -=
-				CONFIG_SYS_MEM_RESERVE_SECURE;
+				CFG_SYS_MEM_RESERVE_SECURE;
 		gd->arch.secure_ram = gd->bd->bi_dram[0].start +
 				      gd->bd->bi_dram[0].size;
 		gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
-		gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+		gd->ram_size -= CFG_SYS_MEM_RESERVE_SECURE;
 	}
-#endif	/* CONFIG_SYS_MEM_RESERVE_SECURE */
+#endif	/* CFG_SYS_MEM_RESERVE_SECURE */
 
 #if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD)
 	/* Assign memory for MC */
@@ -1520,7 +1517,7 @@ int dram_init_banksize(void)
 	}
 #endif
 
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	debug("%s is called. gd->ram_size is reduced to %lu\n",
 	      __func__, (ulong)gd->ram_size);
 #endif
@@ -1569,9 +1566,9 @@ void update_early_mmu_table(void)
 	if (!gd->arch.tlb_addr)
 		return;
 
-	if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
+	if (gd->ram_size <= CFG_SYS_FSL_DRAM_SIZE1) {
 		mmu_change_region_attr(
-					CONFIG_SYS_SDRAM_BASE,
+					CFG_SYS_SDRAM_BASE,
 					gd->ram_size,
 					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
 					PTE_BLOCK_OUTER_SHARE		|
@@ -1579,8 +1576,8 @@ void update_early_mmu_table(void)
 					PTE_TYPE_VALID);
 	} else {
 		mmu_change_region_attr(
-					CONFIG_SYS_SDRAM_BASE,
-					CONFIG_SYS_DDR_BLOCK1_SIZE,
+					CFG_SYS_SDRAM_BASE,
+					CFG_SYS_DDR_BLOCK1_SIZE,
 					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
 					PTE_BLOCK_OUTER_SHARE		|
 					PTE_BLOCK_NS			|
@@ -1589,10 +1586,10 @@ void update_early_mmu_table(void)
 #ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
 #error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
 #endif
-		if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
+		if (gd->ram_size - CFG_SYS_DDR_BLOCK1_SIZE >
 		    CONFIG_SYS_DDR_BLOCK2_SIZE) {
 			mmu_change_region_attr(
-					CONFIG_SYS_DDR_BLOCK2_BASE,
+					CFG_SYS_DDR_BLOCK2_BASE,
 					CONFIG_SYS_DDR_BLOCK2_SIZE,
 					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
 					PTE_BLOCK_OUTER_SHARE		|
@@ -1601,7 +1598,7 @@ void update_early_mmu_table(void)
 			mmu_change_region_attr(
 					CONFIG_SYS_DDR_BLOCK3_BASE,
 					gd->ram_size -
-					CONFIG_SYS_DDR_BLOCK1_SIZE -
+					CFG_SYS_DDR_BLOCK1_SIZE -
 					CONFIG_SYS_DDR_BLOCK2_SIZE,
 					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
 					PTE_BLOCK_OUTER_SHARE		|
@@ -1611,9 +1608,9 @@ void update_early_mmu_table(void)
 #endif
 		{
 			mmu_change_region_attr(
-					CONFIG_SYS_DDR_BLOCK2_BASE,
+					CFG_SYS_DDR_BLOCK2_BASE,
 					gd->ram_size -
-					CONFIG_SYS_DDR_BLOCK1_SIZE,
+					CFG_SYS_DDR_BLOCK1_SIZE,
 					PTE_BLOCK_MEMTYPE(MT_NORMAL)	|
 					PTE_BLOCK_OUTER_SHARE		|
 					PTE_BLOCK_NS			|

arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3

@@ -116,10 +116,10 @@ Flash Layout
 Environment Variables
 =====================
 mcboottimeout:	MC boot timeout in milliseconds. If this variable is not defined
-		the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
+		the value CFG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed.
 
 mcmemsize:	MC DRAM block size in hex. If this variable is not defined, the value
-		CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
+		CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed.
 
 mcinitcmd:	This environment variable is defined to initiate MC and DPL deployment
 		from the location where it is stored(NOR, NAND, SD, SATA, USB)during

arch/arm/cpu/armv8/fsl-layerscape/fdt.c

@@ -171,9 +171,9 @@ static void fdt_fixup_gic(void *blob)
 {
 	int offset, err;
 	u64 reg[8];
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int val;
-	struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR;
 	int align_64k = 0;
 
 	val = gur_in32(&gur->svr);
@@ -355,7 +355,7 @@ static int _fdt_fixup_pci_msi(void *blob, const char *name, int rev)
 
 static void fdt_fixup_msi(void *blob)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int rev;
 
 	rev = gur_in32(&gur->svr);
@@ -620,7 +620,7 @@ void fdt_fixup_pfe_firmware(void *blob)
 
 void ft_cpu_setup(void *blob, struct bd_info *bd)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int svr = gur_in32(&gur->svr);
 
 	/* delete crypto node if not on an E-processor */
@@ -635,7 +635,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 		fdt_fixup_kaslr(blob);
 #endif
 
-		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+		sec = (void __iomem *)CFG_SYS_FSL_SEC_ADDR;
 		fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
 	}
 #endif
@@ -646,7 +646,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd)
 
 #ifdef CONFIG_SYS_NS16550
 	do_fixup_by_compat_u32(blob, "fsl,ns16550",
-			       "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+			       "clock-frequency", CFG_SYS_NS16550_CLK, 1);
 #endif
 
 	do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency",

arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c

@@ -40,7 +40,7 @@ int is_serdes_configured(enum srds_prtcl device)
 
 int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 cfg = gur_in32(&gur->rcwsr[4]);
 	int i;
 
@@ -76,7 +76,7 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 
 int get_serdes_protocol(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 cfg = gur_in32(&gur->rcwsr[4]) &
 			  FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
 	cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
@@ -101,7 +101,7 @@ const char *serdes_clock_to_string(u32 clock)
 void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 		 u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 cfg;
 	int lane;
 
@@ -142,7 +142,7 @@ __weak int set_serdes_volt(int svdd)
 
 int setup_serdes_volt(u32 svdd)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	struct ccsr_serdes *serdes1_base;
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	struct ccsr_serdes *serdes2_base;
@@ -168,7 +168,7 @@ int setup_serdes_volt(u32 svdd)
 	if (svdd_cur == svdd_tar)
 		return 0;
 
-	serdes1_base = (void *)CONFIG_SYS_FSL_SERDES_ADDR;
+	serdes1_base = (void *)CFG_SYS_FSL_SERDES_ADDR;
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	serdes2_base = (void *)serdes1_base + 0x10000;
 #endif
@@ -406,14 +406,14 @@ void fsl_serdes_init(void)
 {
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	serdes_init(FSL_SRDS_1,
-		    CONFIG_SYS_FSL_SERDES_ADDR,
+		    CFG_SYS_FSL_SERDES_ADDR,
 		    FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK,
 		    FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT,
 		    serdes1_prtcl_map);
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	serdes_init(FSL_SRDS_2,
-		    CONFIG_SYS_FSL_SERDES_ADDR,
+		    CFG_SYS_FSL_SERDES_ADDR,
 		    FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK,
 		    FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT,
 		    serdes2_prtcl_map);

arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c

@@ -20,16 +20,12 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info(struct sys_info *sys_info)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 /* rcw_tmp is needed to get FMAN clock, or to get cluster group A
  * mux 2 clock for LS1043A/LS1046A.
  */
-#if defined(CONFIG_SYS_DPAA_FMAN) || \
-	    defined(CONFIG_ARCH_LS1046A) || \
-	    defined(CONFIG_ARCH_LS1043A)
-	u32 rcw_tmp;
-#endif
-	struct ccsr_clk *clk = (void *)(CONFIG_SYS_FSL_CLK_ADDR);
+	__maybe_unused u32 rcw_tmp;
+	struct ccsr_clk *clk = (void *)(CFG_SYS_FSL_CLK_ADDR);
 	unsigned int cpu;
 	const u8 core_cplx_pll[8] = {
 		[0] = 0,	/* CC1 PPL / 1 */
@@ -52,10 +48,11 @@ void get_sys_info(struct sys_info *sys_info)
 	unsigned long cluster_clk;
 
 	sys_info->freq_systembus = sysclk;
-#ifndef CONFIG_CLUSTER_CLK_FREQ
-#define CONFIG_CLUSTER_CLK_FREQ	get_board_sys_clk()
-#endif
+#ifdef CONFIG_CLUSTER_CLK_FREQ
 	cluster_clk = CONFIG_CLUSTER_CLK_FREQ;
+#else
+	cluster_clk = get_board_sys_clk();
+#endif
 
 #if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
 	sys_info->freq_ddrbus = get_board_ddr_clk();
@@ -96,7 +93,7 @@ void get_sys_info(struct sys_info *sys_info)
 
 #define HWA_CGA_M1_CLK_SEL	0xe0000000
 #define HWA_CGA_M1_CLK_SHIFT	29
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 	rcw_tmp = in_be32(&gur->rcwsr[7]);
 	switch ((rcw_tmp & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) {
 	case 2:

arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c

@@ -86,7 +86,7 @@ int is_serdes_configured(enum srds_prtcl device)
 
 int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 cfg = 0;
 	int i;
 
@@ -134,7 +134,7 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
 void serdes_init(u32 sd, u32 sd_addr, u32 rcwsr, u32 sd_prctl_mask,
 		 u32 sd_prctl_shift, u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 cfg;
 	int lane;
 
@@ -399,18 +399,18 @@ static void do_pll_lock(u32 cfg,
 
 int setup_serdes_volt(u32 svdd)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	struct ccsr_serdes __iomem *serdes1_base =
-			(void *)CONFIG_SYS_FSL_LSCH3_SERDES_ADDR;
+			(void *)CFG_SYS_FSL_LSCH3_SERDES_ADDR;
 	u32 cfg_rcwsrds1 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]);
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	struct ccsr_serdes __iomem *serdes2_base =
-			(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000);
+			(void *)(CFG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000);
 	u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
 #endif
 #ifdef CONFIG_SYS_NXP_SRDS_3
 	struct ccsr_serdes __iomem *serdes3_base =
-			(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x20000);
+			(void *)(CFG_SYS_FSL_LSCH3_SERDES_ADDR + 0x20000);
 	u32 cfg_rcwsrds3 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
 #endif
 	u32 cfg_tmp;
@@ -585,7 +585,7 @@ void fsl_serdes_init(void)
 
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	serdes_init(FSL_SRDS_1,
-		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
+		    CFG_SYS_FSL_LSCH3_SERDES_ADDR,
 		    FSL_CHASSIS3_SRDS1_REGSR,
 		    FSL_CHASSIS3_SRDS1_PRTCL_MASK,
 		    FSL_CHASSIS3_SRDS1_PRTCL_SHIFT,
@@ -593,7 +593,7 @@ void fsl_serdes_init(void)
 #endif
 #ifdef CONFIG_SYS_FSL_SRDS_2
 	serdes_init(FSL_SRDS_2,
-		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
+		    CFG_SYS_FSL_LSCH3_SERDES_ADDR + FSL_SRDS_2 * 0x10000,
 		    FSL_CHASSIS3_SRDS2_REGSR,
 		    FSL_CHASSIS3_SRDS2_PRTCL_MASK,
 		    FSL_CHASSIS3_SRDS2_PRTCL_SHIFT,
@@ -601,7 +601,7 @@ void fsl_serdes_init(void)
 #endif
 #ifdef CONFIG_SYS_NXP_SRDS_3
 	serdes_init(NXP_SRDS_3,
-		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + NXP_SRDS_3 * 0x10000,
+		    CFG_SYS_FSL_LSCH3_SERDES_ADDR + NXP_SRDS_3 * 0x10000,
 		    FSL_CHASSIS3_SRDS3_REGSR,
 		    FSL_CHASSIS3_SRDS3_PRTCL_MASK,
 		    FSL_CHASSIS3_SRDS3_PRTCL_SHIFT,
@@ -611,7 +611,7 @@ void fsl_serdes_init(void)
 
 int serdes_set_env(int sd, int rcwsr, int sd_prctl_mask, int sd_prctl_shift)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	char scfg[16], snum[16];
 	int cfgr = 0;
 	u32 cfg;

arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c

@@ -23,13 +23,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void get_sys_info(struct sys_info *sys_info)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	struct ccsr_clk_cluster_group __iomem *clk_grp[2] = {
-		(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPA_ADDR),
-		(void *)(CONFIG_SYS_FSL_CH3_CLK_GRPB_ADDR)
+		(void *)(CFG_SYS_FSL_CH3_CLK_GRPA_ADDR),
+		(void *)(CFG_SYS_FSL_CH3_CLK_GRPB_ADDR)
 	};
 	struct ccsr_clk_ctrl __iomem *clk_ctrl =
-		(void *)(CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR);
+		(void *)(CFG_SYS_FSL_CH3_CLK_CTRL_ADDR);
 	unsigned int cpu;
 	const u8 core_cplx_pll[16] = {
 		[0] = 0,	/* CC1 PPL / 1 */
@@ -68,7 +68,7 @@ void get_sys_info(struct sys_info *sys_info)
 	uint freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
 	unsigned long sysclk = get_board_sys_clk();
-	int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
+	int cc_group[12] = CFG_SYS_FSL_CLUSTER_CLOCKS;
 	u32 c_pll_sel, cplx_pll;
 	void *offset;
 

arch/arm/cpu/armv8/fsl-layerscape/icid.c

@@ -27,7 +27,7 @@ static void set_icid(struct icid_id_table *tbl, int size)
 void set_fman_icids(struct fman_icid_id_table *tbl, int size)
 {
 	int i;
-	ccsr_fman_t *fm = (void *)CONFIG_SYS_FSL_FM1_ADDR;
+	ccsr_fman_t *fm = (void *)CFG_SYS_FSL_FM1_ADDR;
 
 	for (i = 0; i < size; i++) {
 		out_be32(&fm->fm_bmi_common.fmbm_ppid[tbl[i].port_id - 1],
@@ -41,7 +41,7 @@ void set_icids(void)
 	/* setup general icid offsets */
 	set_icid(icid_tbl, icid_tbl_sz);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 	set_fman_icids(fman_icid_tbl, fman_icid_tbl_sz);
 #endif
 }

arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S

@@ -325,8 +325,8 @@ ENDPROC(fsl_ocram_init)
 
 ENTRY(fsl_clear_ocram)
 /* Clear OCRAM */
-	ldr	x0, =CONFIG_SYS_FSL_OCRAM_BASE
-	ldr	x1, =(CONFIG_SYS_FSL_OCRAM_BASE + CONFIG_SYS_FSL_OCRAM_SIZE)
+	ldr	x0, =CFG_SYS_FSL_OCRAM_BASE
+	ldr	x1, =(CFG_SYS_FSL_OCRAM_BASE + CFG_SYS_FSL_OCRAM_SIZE)
 	mov	x2, #0
 clear_loop:
 	str	x2, [x0]

arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c

@@ -10,7 +10,7 @@
 #include <fsl_sec.h>
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = {
 	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
 	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
 	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
@@ -59,7 +59,7 @@ struct icid_id_table icid_tbl[] = {
 
 int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 struct fman_icid_id_table fman_icid_tbl[] = {
 	/* port id, icid */
 	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),

arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c

@@ -9,7 +9,7 @@
 #include <asm/arch-fsl-layerscape/fsl_portals.h>
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = {
 	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
 	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
 	SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0),
@@ -58,7 +58,7 @@ struct icid_id_table icid_tbl[] = {
 
 int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
+#if defined(CONFIG_SYS_DPAA_FMAN) && !defined(CONFIG_SPL_BUILD)
 struct fman_icid_id_table fman_icid_tbl[] = {
 	/* port id, icid */
 	SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),

arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c

@@ -53,7 +53,7 @@ static struct serdes_config *serdes_cfg_tbl[] = {
 
 bool soc_has_mac1(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	unsigned int svr = gur_in32(&gur->svr);
 	unsigned int version = SVR_SOC_VER(svr);
 

arch/arm/cpu/armv8/fsl-layerscape/mp.c

@@ -48,8 +48,8 @@ void update_os_arch_secondary_cores(uint8_t os_arch)
 #ifdef CONFIG_FSL_LSCH3
 static void wake_secondary_core_n(int cluster, int core, int cluster_cores)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
-	struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_reset __iomem *rst = (void *)(CFG_SYS_FSL_RST_ADDR);
 	u32 mpidr = 0;
 
 	mpidr = ((cluster << 8) | core);
@@ -73,13 +73,13 @@ static void wake_secondary_core_n(int cluster, int core, int cluster_cores)
 
 int fsl_layerscape_wake_seconday_cores(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 #ifdef CONFIG_FSL_LSCH3
-	struct ccsr_reset __iomem *rst = (void *)(CONFIG_SYS_FSL_RST_ADDR);
+	struct ccsr_reset __iomem *rst = (void *)(CFG_SYS_FSL_RST_ADDR);
 	u32 svr, ver, cluster, type;
 	int j = 0, cluster_cores = 0;
 #elif defined(CONFIG_FSL_LSCH2)
-	struct ccsr_scfg __iomem *scfg = (void *)(CONFIG_SYS_FSL_SCFG_ADDR);
+	struct ccsr_scfg __iomem *scfg = (void *)(CFG_SYS_FSL_SCFG_ADDR);
 #endif
 	u32 cores, cpu_up_mask = 1;
 	int i, timeout = 10;

arch/arm/cpu/armv8/fsl-layerscape/ppa.c

@@ -253,7 +253,7 @@ int ppa_init(void)
 #endif
 
 #ifdef CONFIG_FSL_LSCH3
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	boot_loc_ptr_l = &gur->bootlocptrl;
 	boot_loc_ptr_h = &gur->bootlocptrh;
 
@@ -261,7 +261,7 @@ int ppa_init(void)
 	loadable_l = &gur->scratchrw[4];
 	loadable_h = &gur->scratchrw[5];
 #elif defined(CONFIG_FSL_LSCH2)
-	struct ccsr_scfg __iomem *scfg = (void *)(CONFIG_SYS_FSL_SCFG_ADDR);
+	struct ccsr_scfg __iomem *scfg = (void *)(CFG_SYS_FSL_SCFG_ADDR);
 	boot_loc_ptr_l = &scfg->scratchrw[1];
 	boot_loc_ptr_h = &scfg->scratchrw[0];
 

arch/arm/cpu/armv8/fsl-layerscape/soc.c

@@ -80,7 +80,7 @@ int ls_gic_rd_tables_init(void *blob)
 
 bool soc_has_dp_ddr(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 svr = gur_in32(&gur->svr);
 
 	/* LS2085A, LS2088A, LS2048A has DP_DDR */
@@ -94,7 +94,7 @@ bool soc_has_dp_ddr(void)
 
 bool soc_has_aiop(void)
 {
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 svr = gur_in32(&gur->svr);
 
 	/* LS2085A has AIOP */
@@ -249,13 +249,13 @@ static void erratum_a008336(void)
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008336
 	u32 *eddrtqcr1;
 
-#ifdef CONFIG_SYS_FSL_DCSR_DDR_ADDR
-	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
+#ifdef CFG_SYS_FSL_DCSR_DDR_ADDR
+	eddrtqcr1 = (void *)CFG_SYS_FSL_DCSR_DDR_ADDR + 0x800;
 	if (fsl_ddr_get_version(0) == 0x50200)
 		out_le32(eddrtqcr1, 0x63b30002);
 #endif
-#ifdef CONFIG_SYS_FSL_DCSR_DDR2_ADDR
-	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
+#ifdef CFG_SYS_FSL_DCSR_DDR2_ADDR
+	eddrtqcr1 = (void *)CFG_SYS_FSL_DCSR_DDR2_ADDR + 0x800;
 	if (fsl_ddr_get_version(0) == 0x50200)
 		out_le32(eddrtqcr1, 0x63b30002);
 #endif
@@ -271,8 +271,8 @@ static void erratum_a008514(void)
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008514
 	u32 *eddrtqcr1;
 
-#ifdef CONFIG_SYS_FSL_DCSR_DDR3_ADDR
-	eddrtqcr1 = (void *)CONFIG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
+#ifdef CFG_SYS_FSL_DCSR_DDR3_ADDR
+	eddrtqcr1 = (void *)CFG_SYS_FSL_DCSR_DDR3_ADDR + 0x800;
 	out_le32(eddrtqcr1, 0x63b20002);
 #endif
 #endif
@@ -412,7 +412,7 @@ void fsl_lsch3_early_init_f(void)
 /* Get VDD in the unit mV from voltage ID */
 int get_core_volt_from_fuse(void)
 {
-	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	int vdd;
 	u32 fusesr;
 	u8 vid;
@@ -462,7 +462,7 @@ int get_core_volt_from_fuse(void)
 static void erratum_a009660(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009660
-	u32 *eddrtqcr1 = (void *)CONFIG_SYS_FSL_SCFG_ADDR + 0x20c;
+	u32 *eddrtqcr1 = (void *)CFG_SYS_FSL_SCFG_ADDR + 0x20c;
 	out_be32(eddrtqcr1, 0x63b20042);
 #endif
 }
@@ -473,7 +473,7 @@ static void erratum_a008850_early(void)
 	/* part 1 of 2 */
 	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
 						CONFIG_SYS_CCI400_OFFSET);
-	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 
 	/* Skip if running at lower exception level */
 	if (current_el() < 3)
@@ -493,7 +493,7 @@ void erratum_a008850_post(void)
 	/* part 2 of 2 */
 	struct ccsr_cci400 __iomem *cci = (void *)(CONFIG_SYS_IMMR +
 						CONFIG_SYS_CCI400_OFFSET);
-	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 	u32 tmp;
 
 	/* Skip if running at lower exception level */
@@ -526,21 +526,21 @@ void erratum_a010315(void)
 static void erratum_a010539(void)
 {
 #if defined(CONFIG_SYS_FSL_ERRATUM_A010539) && defined(CONFIG_QSPI_BOOT)
-	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	u32 porsr1;
 
 	porsr1 = in_be32(&gur->porsr1);
 	porsr1 &= ~FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK;
-	out_be32((void *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
+	out_be32((void *)(CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
 		 porsr1);
-	out_be32((void *)(CONFIG_SYS_FSL_SCFG_ADDR + 0x1a8), 0xffffffff);
+	out_be32((void *)(CFG_SYS_FSL_SCFG_ADDR + 0x1a8), 0xffffffff);
 #endif
 }
 
 /* Get VDD in the unit mV from voltage ID */
 int get_core_volt_from_fuse(void)
 {
-	struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+	struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
 	int vdd;
 	u32 fusesr;
 	u8 vid;
@@ -588,7 +588,7 @@ static int setup_core_volt(u32 vdd)
 #ifdef CONFIG_SYS_FSL_DDR
 static void ddr_enable_0v9_volt(bool en)
 {
-	struct ccsr_ddr __iomem *ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
+	struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR;
 	u32 tmp;
 
 	tmp = ddr_in32(&ddr->ddr_cdr1);
@@ -629,7 +629,7 @@ int setup_chip_volt(void)
 #ifdef CONFIG_FSL_PFE
 void init_pfe_scfg_dcfg_regs(void)
 {
-	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
 	u32 ecccr2;
 
 	out_be32(&scfg->pfeasbcr,
@@ -643,8 +643,8 @@ void init_pfe_scfg_dcfg_regs(void)
 	out_be32(&scfg->rd_qos1, (unsigned int)(SCFG_RD_QOS1_PFE1_QOS
 		 | SCFG_RD_QOS1_PFE2_QOS));
 
-	ecccr2 = in_be32(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2);
-	out_be32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2,
+	ecccr2 = in_be32(CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2);
+	out_be32((void *)CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2,
 		 ecccr2 | (unsigned int)DISABLE_PFE_ECC);
 }
 #endif
@@ -653,7 +653,7 @@ void fsl_lsch2_early_init_f(void)
 {
 	struct ccsr_cci400 *cci = (struct ccsr_cci400 *)(CONFIG_SYS_IMMR +
 					CONFIG_SYS_CCI400_OFFSET);
-	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
 #if defined(CONFIG_FSL_QSPI) && defined(CONFIG_TFABOOT)
 	enum boot_src src;
 #endif

arch/arm/cpu/armv8/fsl-layerscape/spl.c

@@ -116,7 +116,7 @@ void board_init_f(ulong dummy)
 #endif
 	dram_init();
 #ifdef CONFIG_SPL_FSL_LS_PPA
-#ifndef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifndef CFG_SYS_MEM_RESERVE_SECURE
 #error Need secure RAM for PPA
 #endif
 	/*

arch/arm/cpu/armv8/fwcall.c

@@ -103,7 +103,7 @@ void __noreturn psci_system_reset2(u32 reset_level, u32 cookie)
 {
 	struct pt_regs regs;
 
-	regs.regs[0] = ARM_PSCI_0_2_FN64_SYSTEM_RESET2;
+	regs.regs[0] = ARM_PSCI_1_1_FN64_SYSTEM_RESET2;
 	regs.regs[1] = PSCI_RESET2_TYPE_VENDOR | reset_level;
 	regs.regs[2] = cookie;
 	if (use_smc_for_psci)

arch/arm/cpu/armv8/generic_timer.c

@@ -17,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /*
  * Generic timer implementation of get_tbclk()
  */
-unsigned long get_tbclk(void)
+unsigned long notrace get_tbclk(void)
 {
 	unsigned long cntfrq;
 	asm volatile("mrs %0, cntfrq_el0" : "=r" (cntfrq));
@@ -78,7 +78,7 @@ unsigned long timer_read_counter(void)
 /*
  * timer_read_counter() using the Arm Generic Timer (aka arch timer).
  */
-unsigned long timer_read_counter(void)
+unsigned long notrace timer_read_counter(void)
 {
 	unsigned long cntpct;
 
@@ -89,7 +89,7 @@ unsigned long timer_read_counter(void)
 }
 #endif
 
-uint64_t get_ticks(void)
+uint64_t notrace get_ticks(void)
 {
 	unsigned long ticks = timer_read_counter();
 

arch/arm/cpu/armv8/psci.S

@@ -12,11 +12,10 @@
 
 /* Default PSCI function, return -1, Not Implemented */
 #define PSCI_DEFAULT(__fn) \
-	ENTRY(__fn); \
+	WEAK(__fn); \
 	mov	w0, #ARM_PSCI_RET_NI; \
 	ret; \
 	ENDPROC(__fn); \
-	.weak __fn
 
 /* PSCI function and ID table definition*/
 #define PSCI_TABLE(__id, __fn) \
@@ -82,6 +81,7 @@ PSCI_DEFAULT(psci_node_hw_state_64)
 PSCI_DEFAULT(psci_system_suspend_64)
 PSCI_DEFAULT(psci_stat_residency_64)
 PSCI_DEFAULT(psci_stat_count_64)
+PSCI_DEFAULT(psci_system_reset2_64)
 
 .align 3
 _psci_64_table:
@@ -95,6 +95,7 @@ PSCI_TABLE(ARM_PSCI_1_0_FN64_NODE_HW_STATE, psci_node_hw_state_64)
 PSCI_TABLE(ARM_PSCI_1_0_FN64_SYSTEM_SUSPEND, psci_system_suspend_64)
 PSCI_TABLE(ARM_PSCI_1_0_FN64_STAT_RESIDENCY, psci_stat_residency_64)
 PSCI_TABLE(ARM_PSCI_1_0_FN64_STAT_COUNT, psci_stat_count_64)
+PSCI_TABLE(ARM_PSCI_1_1_FN64_SYSTEM_RESET2, psci_system_reset2_64)
 PSCI_TABLE(0, 0)
 
 .macro	psci_enter
@@ -207,7 +208,7 @@ handle_smc64:
  * used for the return value, while in this PSCI environment, X0 usually holds
  * the SMC function identifier, so X0 should be saved by caller function.
  */
-ENTRY(psci_get_cpu_id)
+WEAK(psci_get_cpu_id)
 #ifdef CONFIG_ARMV8_PSCI_CPUS_PER_CLUSTER
 	mrs	x9, MPIDR_EL1
 	ubfx	x9, x9, #8, #8
@@ -221,7 +222,6 @@ ENTRY(psci_get_cpu_id)
 	add	x0, x10, x9
 	ret
 ENDPROC(psci_get_cpu_id)
-.weak psci_get_cpu_id
 
 /* CPU ID input in x0, stack top output in x0*/
 LENTRY(psci_get_cpu_stack_top)
@@ -261,10 +261,9 @@ handle_sync:
  * Override this function if custom error handling is
  * needed for asynchronous aborts
  */
-ENTRY(plat_error_handler)
+WEAK(plat_error_handler)
 	ret
 ENDPROC(plat_error_handler)
-.weak plat_error_handler
 
 handle_error:
 	bl	psci_get_cpu_id
@@ -323,9 +322,8 @@ ENTRY(psci_setup_vectors)
 	ret
 ENDPROC(psci_setup_vectors)
 
-ENTRY(psci_arch_init)
+WEAK(psci_arch_init)
 	ret
 ENDPROC(psci_arch_init)
-.weak psci_arch_init
 
 .popsection

arch/arm/cpu/armv8/sec_firmware.c

@@ -198,7 +198,7 @@ static int sec_firmware_load_image(const void *sec_firmware_img,
 		goto out;
 	}
 
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CFG_SYS_MEM_RESERVE_SECURE
 	/*
 	 * The SEC Firmware must be stored in secure memory.
 	 * Append SEC Firmware to secure mmu table.
@@ -211,7 +211,7 @@ static int sec_firmware_load_image(const void *sec_firmware_img,
 	sec_firmware_addr = (gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK) +
 			gd->arch.tlb_size;
 #else
-#error "The CONFIG_SYS_MEM_RESERVE_SECURE must be defined when enabled SEC Firmware support"
+#error "The CFG_SYS_MEM_RESERVE_SECURE must be defined when enabled SEC Firmware support"
 #endif
 
 	/* Align SEC Firmware base address to 4K */

arch/arm/cpu/armv8/u-boot.lds

@@ -51,10 +51,12 @@ SECTIONS
 	}
 
 #ifndef CONFIG_ARMV8_SECURE_BASE
-#define CONFIG_ARMV8_SECURE_BASE
+#define __ARMV8_SECURE_BASE
 #define __ARMV8_PSCI_STACK_IN_RAM
+#else
+#define __ARMV8_SECURE_BASE	CONFIG_ARMV8_SECURE_BASE
 #endif
-	.secure_text CONFIG_ARMV8_SECURE_BASE :
+	.secure_text __ARMV8_SECURE_BASE :
 		AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
 	{
 		*(._secure.text)

arch/arm/cpu/u-boot.lds

@@ -77,11 +77,13 @@ SECTIONS
 	}
 
 #ifndef CONFIG_ARMV7_SECURE_BASE
-#define CONFIG_ARMV7_SECURE_BASE
+#define __ARMV7_SECURE_BASE
 #define __ARMV7_PSCI_STACK_IN_RAM
+#else
+#define __ARMV7_SECURE_BASE	CONFIG_ARMV7_SECURE_BASE
 #endif
 
-	.secure_text CONFIG_ARMV7_SECURE_BASE :
+	.secure_text __ARMV7_SECURE_BASE :
 		AT(ADDR(.__secure_start) + SIZEOF(.__secure_start))
 	{
 		*(._secure.text)

arch/arm/dts/Makefile

@@ -153,6 +153,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-nanopi-r4s.dtb \
 	rk3399-orangepi.dtb \
 	rk3399-pinebook-pro.dtb \
+	rk3399-pinephone-pro.dtb \
 	rk3399-puma-haikou.dtb \
 	rk3399-roc-pc.dtb \
 	rk3399-roc-pc-mezzanine.dtb \
@@ -170,6 +171,9 @@ dtb-$(CONFIG_ROCKCHIP_RV1108) += \
 	rv1108-elgin-r1.dtb \
 	rv1108-evb.dtb
 
+dtb-$(CONFIG_ROCKCHIP_RV1126) += \
+	rv1126-edgeble-neu2-io.dtb
+
 dtb-$(CONFIG_ARCH_S5P4418) += \
 	s5p4418-nanopi2.dtb
 
@@ -198,7 +202,9 @@ dtb-$(CONFIG_ARCH_MESON) += \
 	meson-g12b-gtking.dtb \
 	meson-g12b-gtking-pro.dtb \
 	meson-g12b-gsking-x.dtb \
+	meson-g12b-odroid-go-ultra.dtb \
 	meson-g12b-odroid-n2.dtb \
+	meson-g12b-odroid-n2l.dtb \
 	meson-g12b-odroid-n2-plus.dtb \
 	meson-sm1-bananapi-m5.dtb \
 	meson-sm1-khadas-vim3l.dtb \
@@ -241,6 +247,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-385-atl-x530.dtb			\
 	armada-385-atl-x530DP.dtb		\
 	armada-385-db-88f6820-amc.dtb		\
+	armada-385-synology-ds116.dtb		\
+	armada-385-thecus-n2350.dtb		\
 	armada-385-turris-omnia.dtb		\
 	armada-388-clearfog.dtb			\
 	armada-388-gp.dtb			\
@@ -278,7 +286,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	cn9132-db-A.dtb				\
 	cn9132-db-B.dtb				\
 	cn9130-crb-A.dtb			\
-	cn9130-crb-B.dtb
+	cn9130-crb-B.dtb			\
+	ac5-98dx35xx-rd.dtb
 endif
 
 dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
@@ -335,7 +344,6 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zybo-z7.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	avnet-ultra96-rev1.dtb			\
-	avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb	\
 	zynqmp-a2197-revA.dtb			\
 	zynqmp-dlc21-revA.dtb			\
 	zynqmp-e-a2197-00-revA.dtb		\
@@ -349,6 +357,8 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \
 	zynqmp-mini-emmc1.dtb			\
 	zynqmp-mini-nand.dtb			\
 	zynqmp-mini-qspi.dtb			\
+	zynqmp-sm-k24-revA.dtb			\
+	zynqmp-smk-k24-revA.dtb			\
 	zynqmp-sm-k26-revA.dtb			\
 	zynqmp-smk-k26-revA.dtb			\
 	zynqmp-sck-kr-g-revA.dtbo		\
@@ -382,6 +392,8 @@ dtb-$(CONFIG_ARCH_VERSAL) += \
 	versal-mini.dtb \
 	versal-mini-emmc0.dtb \
 	versal-mini-emmc1.dtb \
+	versal-mini-ospi-single.dtb \
+	versal-mini-qspi-single.dtb \
 	xilinx-versal-virt.dtb
 dtb-$(CONFIG_ARCH_VERSAL_NET) += \
 	versal-net-mini.dtb \
@@ -952,6 +964,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mm-kontron-bl.dtb \
 	imx8mm-kontron-bl-osm-s.dtb \
 	imx8mm-mx8menlo.dtb \
+	imx8mm-phg.dtb \
 	imx8mm-venice.dtb \
 	imx8mm-venice-gw71xx-0x.dtb \
 	imx8mm-venice-gw72xx-0x.dtb \
@@ -978,6 +991,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mp-dhcom-pdk2.dtb \
 	imx8mp-evk.dtb \
 	imx8mp-icore-mx8mp-edimm2.2.dtb \
+	imx8mp-msc-sm2s.dtb \
 	imx8mp-phyboard-pollux-rdk.dtb \
 	imx8mp-venice.dtb \
 	imx8mp-venice-gw74xx.dtb \
@@ -1245,7 +1259,9 @@ dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
 			      k3-j7200-r5-common-proc-board.dtb \
 			      k3-j721e-sk.dtb \
 			      k3-j721e-r5-sk.dtb
-dtb-$(CONFIG_SOC_K3_J721S2) += k3-j721s2-common-proc-board.dtb\
+dtb-$(CONFIG_SOC_K3_J721S2) += k3-am68-sk-base-board.dtb\
+			       k3-am68-sk-r5-base-board.dtb\
+			       k3-j721s2-common-proc-board.dtb\
 			       k3-j721s2-r5-common-proc-board.dtb
 dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
 			      k3-am642-r5-evm.dtb \
@@ -1255,6 +1271,9 @@ dtb-$(CONFIG_SOC_K3_AM642) += k3-am642-evm.dtb \
 dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \
 			      k3-am625-r5-sk.dtb
 
+dtb-$(CONFIG_SOC_K3_AM625) += k3-am62a7-sk.dtb \
+			      k3-am62a7-r5-sk.dtb
+
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7622-rfb.dtb \
 	mt7623a-unielec-u7623-02-emmc.dtb \

arch/arm/dts/ac5-98dx25xx.dtsi

@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell AC5 SoC";
+	compatible = "marvell,ac5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges;
+
+		internal-regs@7f000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 16M internal register @ 0x7f00_0000 */
+			ranges = <0x0 0x0 0x7f000000 0x1000000>;
+			dma-coherent;
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "okay";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				clocks = <&cnm_clock>;
+				status = "disabled";
+			};
+
+			mdio: mdio@22004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x22004 0x4>;
+				clocks = <&cnm_clock>;
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				clocks = <&cnm_clock>;
+				clock-names = "core";
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency=<100000>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "okay";
+			};
+
+			gpio1: gpio@18140 {
+				reg = <0x18140 0x40>;
+				compatible = "marvell,orion-gpio";
+				ngpios = <14>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "okay";
+			};
+		};
+
+		/*
+		 * Dedicated section for devices behind 32bit controllers so we
+		 * can configure specific DMA mapping for them
+		 */
+		behind-32bit-controller@7f000000 {
+			compatible = "simple-bus";
+			#address-cells = <0x2>;
+			#size-cells = <0x2>;
+			ranges = <0x0 0x0 0x0 0x7f000000 0x0 0x1000000>;
+			/* Host phy ram starts at 0x200M */
+			dma-ranges = <0x0 0x0 0x2 0x0 0x1 0x0>;
+			dma-coherent;
+
+			eth0: ethernet@20000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x20000 0x0 0x4000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			eth1: ethernet@24000 {
+				compatible = "marvell,armada-ac5-neta";
+				reg = <0x0 0x24000 0x0 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&cnm_clock>;
+				phy-mode = "sgmii";
+				status = "disabled";
+			};
+
+			usb0: usb@80000 {
+				compatible = "marvell,ac5-ehci";
+				reg = <0x0 0x80000 0x0 0x500>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb1: usb@a0000 {
+				compatible = "marvell,ac5-ehci";
+				reg = <0x0 0xa0000 0x0 0x500>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		pinctrl0: pinctrl@80020100 {
+			compatible = "marvell,mvebu-pinctrl";
+			reg = <0 0x80020100 0 0x20>;
+			pin-count = <46>;
+			max-func = <0xf>;
+			status = "okay";
+		};
+
+		spi0: spi@805a0000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a0000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi1: spi@805a8000 {
+			compatible = "marvell,armada-3700-spi";
+			reg = <0x0 0x805a8000 0x0 0x50>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+			clocks = <&spi_clock>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@80600000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x80600000 0x0 0x10000>, /* GICD */
+			      <0x0 0x80660000 0x0 0x40000>; /* GICR */
+			interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	clocks {
+		cnm_clock: cnm-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <328000000>;
+		};
+
+		spi_clock: spi-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+};

arch/arm/dts/ac5-98dx35xx-rd.dts

@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For RD-AC5X.
+ *
+ * Copyright (C) 2021 Marvell
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+/*
+ * Device Tree file for Marvell Alleycat 5X development board
+ * This board file supports the B configuration of the board
+ */
+
+/dts-v1/;
+
+#include "ac5-98dx35xx.dtsi"
+
+/ {
+	model = "Marvell RD-AC5X Board";
+	compatible = "marvell,rd-ac5x", "marvell,ac5x", "marvell,ac5";
+
+	aliases {
+		serial0 = &uart0;
+		spiflash0 = &spiflash0;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi0 = &spi0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		pinctrl0 = &pinctrl0;
+		sar-reg0 = "/config-space/sar-reg";
+	};
+
+	usb1phy: usb-phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+	      reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-handle = <&phy0>;
+};
+
+/* USB0 is a host USB */
+&usb0 {
+	status = "okay";
+};
+
+/* USB1 is a peripheral USB */
+&usb1 {
+	status = "okay";
+	phys = <&usb1phy>;
+	phy-names = "usb-phy";
+	dr_mode = "peripheral";
+};
+
+&spi0 {
+	status = "okay";
+
+	spiflash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		spi-rx-bus-width = <1>; /* 1-single, 2-dual, 4-quad */
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&pinctrl0 {
+	/*
+	 * MPP Bus:     MPP#     mode#
+	 * eMMC          [0-11]   0x1
+	 * SPI[0]        [12-17]  0x1
+	 * TSEN_INT      [18]     0x1
+	 * DEV_INIT      [19]     0x1
+	 * SPI[1]        [20-23]  0x3
+	 * UART[1]       [24-25]  0x3
+	 * I2C[0]        [26-27]  0x1
+	 * XSMI[0]       [28-29]  0x1 // SCH use SMI[0], reversed due to CPSS problem
+	 * SMI[1]        [30-31]  0x2 // SCH use XSMI[1], reversed due to CPSS problem
+	 * UART[0]       [32-33]  0x1
+	 * OOB_SMI       [34-35]  0x1
+	 * PTP_CLK0_OUT  [36]     0x1
+	 * PTP_PULSE_OUT [37]     0x1
+	 * RCVR_CLK_OUT  [38]     0x1
+	 * GPIO(in/out)  [39]     0x0
+	 * GPIO(in/out)  [40]     0x0
+	 * PTP_REF_CLK   [41]     0x1
+	 * PTP_CLK0      [42]     0x1
+	 * LED0_CLK      [43]     0x1
+	 * LED0_STB      [44]     0x1
+	 * LED0_DATA     [45]     0x1
+	 */
+	/*	     0    1    2    3    4    5    6    7    8    9 */
+	pin-func = < 1    1    1    1    1    1    1    1    1    1
+		     1    1    1    1    1    1    1    1    1    1
+		     3    3    3    3    3    3    1    1    1    1
+		     2    2    1    1    1    1    1    1    1    0
+		     0    1    1    1    1    1    >;
+};

arch/arm/dts/ac5-98dx35xx.dtsi

@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree For AC5X.
+ *
+ * Copyright (C) 2022 Allied Telesis Labs
+ */
+
+#include "ac5-98dx25xx.dtsi"
+
+/ {
+	model = "Marvell AC5X SoC";
+	compatible = "marvell,ac5x", "marvell,ac5";
+};
+
+&cnm_clock {
+	clock-frequency = <325000000>;
+};

arch/arm/dts/am335x-evm-u-boot.dtsi

@@ -6,9 +6,9 @@
 #include "am33xx-u-boot.dtsi"
 
 &l4_per {
-
+	u-boot,dm-pre-reloc;
 	segment@300000 {
-
+		u-boot,dm-pre-reloc;
 		target-module@e000 {
 			u-boot,dm-pre-reloc;
 
@@ -26,3 +26,29 @@
 &usb0 {
 	dr_mode = "peripheral";
 };
+
+&i2c0 {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_wkup {
+	u-boot,dm-pre-reloc;
+	segment@200000 {
+		u-boot,dm-pre-reloc;
+		target-module@9000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc1 {
+	u-boot,dm-pre-reloc;
+};
+
+&mmc2 {
+	u-boot,dm-pre-reloc;
+};

arch/arm/dts/am335x-sancloud-bbe-lite-u-boot.dtsi

@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2021 SanCloud Ltd
+ */
+
+#include "am335x-sancloud-bbe-u-boot.dtsi"
+
+&l4_wkup {
+	segment@200000 {
+		target-module@0 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&prcm {
+	u-boot,dm-pre-reloc;
+};
+
+&per_cm {
+	u-boot,dm-pre-reloc;
+};
+
+&l4ls_clkctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&l4_per {
+	u-boot,dm-pre-reloc;
+	segment@0 {
+		u-boot,dm-pre-reloc;
+		target-module@30000 {
+			u-boot,dm-pre-reloc;
+		};
+	};
+};
+
+&spi0 {
+	u-boot,dm-pre-reloc;
+	channel@0 {
+		u-boot,dm-pre-reloc;
+	};
+};

arch/arm/dts/am335x-sancloud-bbe-lite.dts

@@ -41,7 +41,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		compatible = "micron,spi-authenta";
+		compatible = "micron,spi-authenta", "jedec,spi-nor";
 
 		reg = <0>;
 		spi-max-frequency = <16000000>;

arch/arm/dts/am335x-sancloud-bbe-u-boot.dtsi

@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 SanCloud Ltd
+ */
+
+#include "am335x-evm-u-boot.dtsi"

arch/arm/dts/am3517-evm-ui.dtsi

@@ -72,7 +72,7 @@
 
 		record {
 			label = "Record";
-			/* linux,code = <BTN_0>; */
+			linux,code = <KEY_RECORD>;
 			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
 		};
 

arch/arm/dts/armada-385-synology-ds116.dts

@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Synology DS116 NAS
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Synology DS116";
+	compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				/* A PIC16F1829 is connected to uart1 at 9600 bps,
+				 * and takes single-character orders :
+				 *   "1" : power off // already handled by the poweroff node
+				 *   "2" : short beep
+				 *   "3" : long beep
+				 *   "4" : turn the power LED ON
+				 *   "5" : flash the power LED
+				 *   "6" : turn the power LED OFF
+				 *   "7" : turn the status LED OFF
+				 *   "8" : turn the status LED ON
+				 *   "9" : flash the status LED
+				 *   "A" : flash the motherboard LED (D8)
+				 *   "B" : turn the motherboard LED OFF
+				 *   "C" : hard reset
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				status = "okay";
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				usb-phy = <&usb3_0_phy>;
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				usb-phy = <&usb3_1_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 16 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <   0 0
+					      1500 1
+					      2500 2
+					      3000 3
+					      3400 4
+					      3700 5
+					      3900 6
+					      4000 7>;
+			#cooling-cells = <2>;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			/* The green part is on gpio0.20 which is also used by
+			 * sata0, and accesses to SATA disk 0 make it blink so it
+			 * doesn't need to be declared here.
+			 */
+			orange {
+				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+				label = "ds116:orange:disk";
+				default-state = "off";
+			};
+		};
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_usb3_0_vbus: usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_1_vbus: usb3-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci1_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		/* Note: there is a redboot partition table despite u-boot
+		 * being used. The names presented here are the same as those
+		 * found in the FIS directory. There is also a small device
+		 * tree in the last 64kB of the RedBoot partition which is not
+		 * enumerated. The MAC address and the serial number are listed
+		 * in the "vendor" partition.
+		 */
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x000f0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "zImage";
+			reg = <0x000f0000 0x002d0000>;
+		};
+
+		partition@390000 {
+			label = "rd.gz";
+			reg = <0x003c0000 0x00410000>;
+		};
+
+		partition@7d0000 {
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&pinctrl {
+	/* use only one pin for UART1, as mpp20 is used by sata0 */
+	uart1_pins: uart-pins-1 {
+		marvell,pins = "mpp19";
+		marvell,function = "ua1";
+	};
+
+	xhci0_vbus_pins: xhci0_vbus_pins {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+	xhci1_vbus_pins: xhci1_vbus_pins {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+};

arch/arm/dts/armada-385-thecus-n2350.dts

@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Thecus N2350 board
+ *
+ * Copyright (C) 2018-2023 Tony Dinh <mibodhi@gmail.com>
+ * Copyright (C) 2018 Manuel Jung <manuel.jung@hotmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Thecus N2350";
+	compatible = "thecus,n2350", "marvell,armada385";
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_0_power>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_1_power>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_sata1_white_led
+				&pmx_sata1_red_led
+				&pmx_sata2_white_led
+				&pmx_sata2_red_led
+				&pmx_sys_white_led
+				&pmx_sys_red_led
+				&pmx_pwr_blue_led
+				&pmx_pwr_red_led
+				&pmx_usb_white_led
+				&pmx_usb_red_led>;
+
+		pinctrl-names = "default";
+
+		white_sata1 {
+			label = "n2350:white:sata1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ide-disk1";
+		};
+
+		red_sata1 {
+			label = "n2350:red:sata1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-sata2 {
+			label = "n2350:white:sata2";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-sata2 {
+			label = "n2350:red:sata2";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-sys {
+			label = "n2350:white:sys";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		red-sys {
+			label = "n2350:red:sys";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-pwr {
+			label = "n2350:blue:pwr";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-pwr {
+			label = "n2350:red:pwr";
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-usb {
+			label = "n2350:white:usb";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-usb {
+			label = "n2350:red:usb";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB3_0_Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3_1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB3_1_Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sata0: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "pwr_en_sata0";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_5v_sata0: v5-sata0 {
+			compatible = "regulator-fixed";
+			regulator-name = "v5.0-sata0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&reg_sata0>;
+		};
+
+		reg_12v_sata0: v12-sata0 {
+			compatible = "regulator-fixed";
+			regulator-name = "v12.0-sata0";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			vin-supply = <&reg_sata0>;
+		};
+
+		reg_sata1: regulator@4 {
+			regulator-name = "pwr_en_sata1";
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_5v_sata1: v5-sata1 {
+			compatible = "regulator-fixed";
+			regulator-name = "v5.0-sata1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&reg_sata1>;
+		};
+
+		reg_12v_sata1: v12-sata1 {
+			compatible = "regulator-fixed";
+			regulator-name = "v12.0-sata1";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			vin-supply = <&reg_sata1>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		status = "okay";
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "rootfs";
+				reg = <0x00000000 0x20000000>;
+			};
+
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_power_button: pmx-power-button {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_copy_button: pmx-copy-button {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_white_led: pmx-sata1-white-led {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_red_led: pmx-sata1-red-led {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata2_white_led: pmx-sata2-white-led {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata2_red_led: pmx-sata2-red-led {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_sys_white_led: pmx-sys-white-led {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sys_red_led: pmx-sys-red-led {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp51";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_blue_led: pmx-pwr-blue-led {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_red_led: pmx-pwr-red-led {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_white_led: pmx-usb-white-led {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_red_led: pmx-usb-red-led {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+};
+
+&sdhci {
+	broken-cd;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+	no-1-8-v;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	/* spi: 4M Flash Macronix MX25L3205D */
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "macronix,mx25l3205d", "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <108000000>;
+		spi-cpha;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x00000000 0x00100000>;
+		};
+
+		partition@100000 {
+			label = "u-boot-env";
+			reg = <0x00100000 0x00010000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};

arch/arm/dts/armada-ap80x.dtsi

@@ -181,7 +181,7 @@
 				reg-io-width = <1>;
 				clocks = <&ap_syscon 3>;
 				status = "disabled";
-
+				clock-frequency = <200000000>;
 			};
 
 			watchdog: watchdog@610000 {

arch/arm/dts/ast2600.dtsi

@@ -681,6 +681,7 @@
 
 			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
+				reg = <0x1e78a000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x1e78a000 0x1000>;

arch/arm/dts/at91-sam9x60_curiosity.dts

@@ -49,6 +49,13 @@
 						atmel,pins =
 							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
+
+					usb1 {
+						pinctrl_usb_default: usb_default {
+							atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+									AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+						};
+					};
 			};
 		};
 	};
@@ -89,3 +96,17 @@
 	phy-mode = "rmii";
 	status = "okay";
 };
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 18 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};